• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.297-297
• /
• 2010

Transparent conductive Oxide (TCO) is an essential material in the various optoelectronic applications as a transparent electrode, such as solar cells, flat panel displays and organic light emitting diodes. Currently, Indium tin oxide (ITO) is commonly used in industry due to its low electrical resistivity, high transmittance and high adhesion to substrate. However, ITO is expensive and should be prepared at high temperature, which makes it hard to use ITO in flexible devices. In this regard, Ga-doped ZnO is expected as an ideal candidate for replacing ITO.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.296-296
• /
• 2010

In this work, we report the effect of substrate on the growth of Ga-doped ZnO (GZO) thin films. GZO thin films were deposited on various substrates by using pulsed laser deposition (PLD). The structural properties, surface morphologies, and electrical properties were investigated. From the results of HRXRD, c-plane (0002) oriented growth of GZO films was confirmed on $Al_2O_3$ (0001). On the other hand, the GZO films on LAO (100) substrates were grown along the a-axis. The obvious differences on the electrical properties of each film were also obtained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.77-78
• /
• 2008

ZnO thin films were deposited on glass substrates by pulsed laser deposition (PLD) at various oxygen pressures. We observed structural, electrical and optical properties of ZnO films. Structural properties were analysed by XRD and FE-SEM. Electrical properties for applications of transparent thin film transistors (TTFTs) were measured by hall measurement using van der pauw methods at room temperature. In order to apply in transparent devices, we measured transmittance, and optical bandgap energy was calculated by Tauc's equation. The results showed that ZnO films deposited at 200mTorr oxygen pressure were applicable to channel layers of transparent TFTs. It had high hall mobilities ($52.92cm^2$/V-s) and suitable transmittance at visible wavelength region (above 80%).

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.3
• /
• pp.61-67
• /
• 2003

A new precess which consists of pre-dewatering device, post composting for solid phase and post sequencing batch reactor(SBR) for liquid phase was designed. Nitrogen in supernatants of dewatering device was removed by sequencing batch reactor. Experiments were carried out to investigate the SBR operation modes such as fill ratio, SRT, and operation cycle. The optimum fill ratio, SRT and aeration/non-aeration time were 1/12, 15days, and 2hr aeration / 1hr non aeraion, respectively. Methanol as an external carbon source increased denitrification when step feeding method was applied, not single feeding method.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.249-253
• /
• 2003

강서구를 제외한 부산 전지역에서 1998년도에 조사된 지하수 수질 중 6개 성분(pH, TS, KMnO$_4$, Cl, SO$_4$, NO$_3$-N)에 대한 일반통계분석 결과 pH 성분을 제외하고는 5개 성분의 중앙값이 평균보다 적은 값을 보이는 양성왜도를 보임으로써, 수질오염정도를 분석하기 위해 지시크리깅이라는 비모수적인 지구통계분석기법을 적용하였다. 6개 수질성분에 대해 음용수 기준치를 적용하여 음용가능은 “1”의 값이, 음용불가능은 “0”의 값이 주어졌다. 이렇게 변환된 자료를 이용하여 각 성분별로 실험적인 베리오그램 분석을 실시한 결과 pH, TS, SO$_4$ 성분은 선형모델이 선정되었으며, KMnO$_4$, Cl, NO$_3$-N 성분은 구상형모델이 선정되었다. 본 연구에서는 지시크리깅을 이용하여 6개 성분의 분포도를 작성하고 부산지역의 오염정도를 분석하였다. 지시크리깅기법은 연구지역 전체의 정량적인 분포를 나타내지는 못하지만, 오염의 유.무와 오염의 크기를 정확하게 파악할 수 있으며 또한, 이상치(outlier)가 크게 영향을 미칠 수 있는 통계학적인 오류를 보완할 수 있다.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.436-438
• /
• 2007

As the sensors and communication technology get advance, the remote health diagnosis for patients and senior persons at home are possible now without visiting doctors in hospitals. A low-power ubiquitous health check device was developed adapting Real-Time Embedded Linux is developed. This ubiquitous device is consisted of three sensors. The wrist type health checking terminal acquires periodically the health data by using a blood pressure sensor, a pulse sensor and a body temperature sensor. It transmits the health data to the access point located at the home center through the ZigBee wireless communication modem. This health data collector or access point device sends the data again to the main server operated in a hospital or health care organization. The health server control continuously the input data and sends an alarm signal to the assigned. doctor and responsible persons using cellular SMS when any dangerous events occur. This wrist type health check device has an embedded linux OS using Intel PAX255 MPU. The developed U-Health system is applicable for checking patients health in remote at home. And their family or related persons in remote site can check the patients health status at any time. They can be assured by receiving SMS record and alarm of emergency case which is transmitted from the health server.

• The Journal of Society for e-Business Studies
• /
• v.17 no.2
• /
• pp.1-22
• /
• 2012

In this paper, we propose a master planning framework for the development of u-City export model. The framework consists of a general plan, a construction plan, an operation plan and an evaluation plan for the successful penetration of u-City overseas market, respectively. In order to derive those planning elements, governmental policies and related literature for u-City export is thoroughly reviewed. The framework is applied to a project which develops an u-City export model. This study will contribute to the realization of such governmental policies for the revitalization of u-City export as well as the activation of u-City export by the private sector.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.765-772
• /
• 2020

Currently, general educational science experiment teaching aids cannot be accurately measured, and even MBL experiment teaching aids consist of sensor-oriented programs that is difficult to actively design experiments by focusing only on securing data. This study envisioned a science experiment parish system capable of software convergence experiment design through curriculum analysis, and designed the entire system architecture, frame, and mechanism of MBL-based science experiment parish system by supplementing the limitations of the existing experiment.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.79-86
• /
• 2023

This study was investigated the effect of carbon on the micro-structure and hardness of ductile cast iron roll with internal curing capacity. Spheroidal graphite existed at roll body with rapid cooling, but granular graphite existed at roll neck with slow cooling. The volume fraction of graphite increased at roll body with rapid cooling, That of roll neck with slow cooling decreased, but graphite size increased. The volume fraction of cementite decreased, but volume fraction increased. The cementite size was larger at roll neck than roll body. The hardness was decreased at roll body and roll neck due to volume fraction of cementite. The hardness of roll body was higher than roll neck.

• Journal of Agricultural Extension & Community Development
• /
• v.20 no.4
• /
• pp.871-907
• /
• 2013

The purpose of this study is to establish a new rural development policy system based on the unit of a community organizations. This study is to complement or replace the existing rural development system which is based on the unit of rural villages. The communalism which is the core concept of traditional rural villages has been weakened or destroyed. Especially, economic, social and spatial communalism of a rural villages has been weakened rapidly in the process of industralization and urbanization for the last 50 years. This means that strong communalism inside rural villages and neighborhood independence from each others among rural villages are already weakened. Rural villages no longer represent rural area, unlikely the hypothesis policy makers have been used to set up rural development policies. Advanced countries like EU and Japan are well known to have a rural development policy based on the units of social organizations in the rural area. These policies have been on the main stream in the era of local decentralization. Rural resident's organization made rural site's development plan using local assets and submitted to the public sector. Then the public sector examine its value and possibilities as a rural development projects. And public sector finalize the decision on subsidy grant. These policy patterns are already introduced partly in the field of urban development programme as well as rural development programme. It is time to apply those policies more widely and to examine more systematically.