• Journal of the Korean Electrochemical Society
• /
• v.15 no.1
• /
• pp.41-47
• /
• 2012

An annular flow type of copper electrolysis reactor was setup in order to generate the copper ions to remove algae in water. The operating characteristics of the reactor and the effect of copper ion on algae have been considered. By controling the applied current, the copper ion concentration could be obtained as desired level and the faradaic efficiency was above 90%. When the flow rate was increased, the copper ion concentration was linearly decreased due to the dilution effect and the effect of concentration overpotential was insignificant. With the increase of pH in water, the copper ion concentration was linearly decreased and not affected by the conductivity of the water. The concentration of chlorophyll-a was sharply decreased with the increase of copper ion concentration. The algae was effectively removed as the copper ion concentration was above 0.2 ppm. There was no difference between the copper ions obtained by dissolving copper sulfate and those produced by copper electrolysis. The algae removal efficiency was above 90% after 5 days as the copper ion concentration was above 0.4 ppm.

• Resources Recycling
• /
• v.15 no.2 s.70
• /
• pp.45-49
• /
• 2006

The removal of copper ion from aqueous solution by adsorption with bone char that made from spent pig bone has been studied. This paper was studied the effects of bone char dosage and pH. The optimal results show that bone char adsorbs about 96.5 percent of copper ion in aqueous solution containing 50 mg/L as initial concentration at pH 5.0 when the bone char of 5g/L is used for 30 hours. Increase in the initial pH of the copper solution resulted in an increase in the copper ion uptake per weight of the sorbent Freundlich isotherm model was found to be applicable for the experimental data of $Cu^{2+}$.

• Journal of the Korean Chemical Society
• /
• v.36 no.5
• /
• pp.632-637
• /
• 1992

Standard transfer free energies of sodium and cupric perchlorates in water-acetylacetone solvent system have been determined by electromotive force measurements of galvanic cell and these energies of sodium and cupric ions in this solvent system have been evaluated by the tetrabutylammonium tetraphenylborate assumption as the extrathermodynamic procedure. Standard transfer free energy values of sodium and cupric ions from water to acetylacetone solvent were 5.09 and 4.16 kcal/mol at 25${\circ}C$, respectively. These values mean that acetylacetone is much weaker donor solvent to sodium and cupric ions than water. The standard transfer free energy value of cupric ion from water to mixture solvents which contain small amount of acetylacetone is changed by an unusual form. This is because of the chelate formation effect of acetylacetone to cupric ion.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.237-237
• /
• 2009

전도 특성을 가지는 나노선 제작의 연구가 활발하게 진행되고 있다. 본 실험에서는 높은 전도성을 가지는 구리 이온을 이용하여 나노선을 제작하는 실험을 진행하였으며 제작된 구리-나노선의 전도특성을 분석하여 구리 이온 치환 정도에 따른 DNA 전도성 개선 여부를 확인하였다. DNA를 기반으로 구리 Metalization 횟수가 늘어날수록 나노선이 연속적으로 형성되며 선형적이고 높은 전도특성을 가지게 되는 것을 확인할 수 있었다. 이 결과로부터 본 연구에서 사용한 방법을 이용하여 제작된 구리 나노선이 향후 나노소자 제작에 크기 기여할 것으로 기대한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.83-84
• /
• 2007

Damascene 공정을 이용하여 80nm급의 trench 패턴 내에 구리 배선 형성을 위해 무전해 구리 도금법을 이용하였다. 화학 반응으로 진행되는 무전해 도금법에 의한 구리이온의 초미세 패턴 내 환원 과정에 구리 이온의 물질 전달과정이 구리 도금층의 표면 특성과 superconformality에 미치는 영향을 살펴보았다. 회전 전극에 고정된 칩의 회전 속도가 증가함에 따라 구리 도금층의 비저항이 감소하고, trench 내 균일 도금성이 향상되는 것으로 나타났다.

• Journal of the Korean Vacuum Society
• /
• v.12 no.2
• /
• pp.136-143
• /
• 2003

In this paper, high purity RF sputter-type ion source for non-mass separated ion beam deposition was evaluated. The fundamental characteristics of the ion source which is composed of an RF Cu coil and a high purity Cu target (99.9999 %) was studied, and the practical application of Cu thin films for ULSI metallization was discussed. The relationship between the DC target current and the DC target voltage at various RF power and Ar gas pressures was measured, and then preparation conditions for Cu thin films was described. As a result, it was found that the deposition conditions of the target voltage, the target current and the Ar pressure were optimized at -300 V, 240 W and 9 Pa, respectively. The resistivity of Cu films deposited at a bias voltage of -50 V showed a minimum value of 1.8 $\pm$ 0.1 $mu\Omega$cm, which is close to that of Cu bulk (1.67 $mu\Omega$cm).

• Applied Chemistry for Engineering
• /
• v.25 no.3
• /
• pp.307-311
• /
• 2014

In this present study, Castanea crenata was found as an excellent biosorbent for the removal capability of copper ions among four different wood wastes (Castanea crenata, Pinus densiflora, Larix kaemoferi and Robinia pseudoacaia). Also, the removal efficiencies of 5, 10, 20, 40 and 50 mg/L copper ions using Castanea crenata from aqueous solution were investigated. The most effective particle size of Castanea crenata for removing 5 mg/L copper ions was found to be $43{\sim}63{\mu}m$. When the concentration of Castanea crenata increased, the removal efficiencies of copper ions were enhanced. In addition, when the 0.8 g/100 mL of Castanea crenata was used for 30 min, the removal efficiencies of 20 and 40 mg/L copper ions were 99% and 85%, respectively. Moreover, the chemical treatment of Castanea crenata with 1 M sodium acetate was required to improve the removal ability for 50 mg/L copper ions. Meanwhile, 1 M hydrochloric acid was selected as the optimal desorption agent with 93% desorption efficiency of copper ions for recycling of modified Castanea crenata. Therefore, these experimental results could be employed as economical and practical engineering data for the development of copper removal processes.

• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.272-277
• /
• 2014

In this study the nanofiltration (NF) membrane treatment of a sulfuric acid waste solutions containing copper ion ($Cu^{+2}$) discharging from the etching processes of the printed circuit board (PCB) manufacturing industry has been studied for the recycling of acid etching solution. SelRO MPS-34 4040 NF membrane from Koch company was tested to obtain the basic NF data for recycling of etching solution and separation efficiency (total rejection) of copper ion. NF experiments were carried out with a cross-flow membrane filtration laboratory system. The permeate flux was decreased with the increasing copper ion concentration in sulfuric acid solution and lowering pH of acid solution, and its value was the range of $4.5{\sim}23L/m^2{\cdot}h$. Total rejection of copper ion was decreased with the increasing copper ion concentration, lowering pH of acid solution and decreasing cross-flow rate. The total rejection of copper ion was more than 70% at the experimental condition. The SelRO MPS-34 4040 NF membrane was represented the stable flux and rejection for 1 year operation.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2001.06a
• /
• pp.44-44
• /
• 2001

구리(II)의 전자상자성공명 흉수선의 모양과 선 폭에 대한 해석을 통해 석영-물 계면에서의 구리(II) 및 흡착수와 석영 표면과의 상호 작용에 대해 연구하였다. 두 가지 흡수선이 중첩하여 흡수선을 구성하며 따라서 석영 표면에 적어도 두 종류의 구리(II)가 존재함을 알 수 있었다. 하나는 g=2.18에 중심을 둔 초미세 갈라짐이 분해되지 않는 등방성 단일 흡수선을 보여 주는 구리(II) 이온이다. 이는 수용액 중에서와 유사한 빠른 자유 회전 운동이 가능한 상태로 표면에 매우 약하게 결합된 구리 이온(Cu($H_2O$)$_{6}$$^{2+}$)인 것으로 해석된다. 다른 하나는 축 대칭 흡수선 $g_{∥}$=2.40, $g_{⊥}$=2.08)을 가지는 구리(II)로서 이는 표면에 강하게 결합된 것으로 해석된다. 본 결과는 흡착 현상에 대한 열역학적 접근법인 표면 착물화 모델들이 제시하는 광물 표면에서의 금속 이온 흡착 모델이 거시적 관점에서 흡착 현상을 잘 모사할지라도 분자 수준의 미시적 관점에서 흡착 메커니즘을 규명하기 위해서는 독립적인 분광학적 정보가 제시되어야함을 보여 준다.다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.100-105
• /
• 2017

An 8-hydroxyquinoline compound that was synthesized with 8-hydroxyquinoline-2-carboxaldehyde and 4-aminoantipyrine was investigated for use as the sensing material of a fiber-optic copper ion sensor in an aqueous environment. The experiment was conducted with a fiber-optic measurement system, in order to evaluate the relationship between the absorbance peak and copper ion concentration. The synthesized derivative exhibited a (highly selective) chromogenic phenomenon for copper ions among various metal ions in an aqueous environment and showed a specific absorbance peak at a wavelength of 530 nm for copper ions. The effect of mercury ions was investigated to evaluate the selectivity of the prepared synthesized derivatives toward Cu ions. The absorbance was measured at various concentration ratios of Cu and Hg ions (Cu:Hg ratios from 0.05 to 20), and it was found that the absorbance at 530 nm tended to increase with increasing Cu ion concentration. The experimental results also showed the linear relationship between the logarithmic concentration of copper ions and the specific absorbance peak at a wavelength of 530 nm. These results indicate that the synthesized 8-hydroxyquinoline compound has selectivity for copper ions and can be used as a sensing material for fiber-optic copper ion sensors.