• Resources Recycling
• /
• v.29 no.2
• /
• pp.18-27
• /
• 2020

Chemical experiment KS F 2545 and Physical experiment ASTM C 1260 has been accomplished to estimate the potential of alkali aggregate. Used for testing aggregate samples are forest aggregate and recycled aggregate which collected in Gangwon province Samcheok and Pyeongchang, Jeollabuk province Gimje and Kochang, and Gyeongsangnam province Goryeong. As the results of chemical experiment confirmed that if silicate rock and carbonate rock are mixed, reduction in alkalinity is increase. So it has been identified that case makes a disturb at the result of alkali aggregate reaction. In 9 out of the 62 aggregate samples check dissolved silica exceeding 100 mmol/ℓ. and mortar bar length increase rate confirmed that 5 of 9 chemical method aggregates were 0.1~0.2% and 2 aggregates were 0.2%. As a result of the alkaline aggregate reaction test using the chemical method and the mortar bar method, the aggregates showing alkali aggregate reaction are sandstone and tuff aggregates. Therefore, Alkali aggregate reaction tests are required to use clastic sedimentary rocks and volcanic pyroclastic rocks aggregates.

• Journal of the Korean Geographical Society
• /
• v.42 no.4
• /
• pp.469-487
• /
• 2007

Grain-Size Trend Analysis is the methodology to identify net sediment transport pathways, based on the assumption that the movement of sediment from the source to deposit leaves the identifiable spatial pattern of mean, sorting, and skewness of grain size. It can easily be implemented with low cost, so it has great potentials to contribute to geomorphological research, whereas it can also be used inadequately without recognition of its limitations. This research aims to compare three established methods of grain-size trend analysis to search for the adequate way of application, and also suggest the research tasks needed in improving this methodology 1D pathway method can corporate the field experience into analyzing the pathway, provide the useful information of depositional environments through X-distribution, and identify the long-term trend effectively. However, it has disadvantage of the dependence on subjective interpretation, and a relatively coarse temporal scale. Gao-Collins's 2D transport vector method has the objective procedure, has the capability to visualize the transport pattern in 2D format, and to identify the pattern at a finer temporal scale, whereas characteristic distance and semiquantitative filtering are controversial. Le Roux's alternative 2D transport vector method has two improvement of Gao-Collins's in that it expands the empirical rules, considers the gradient of each parameters as well as the order, and has the ability to identify the pattern at a finer temporal scale, while the basic concepts are arbitrary and complicated. The application of grain sire trend analysis requires the selection of adequate method and the design of proper sampling scheme, based on the field knowledge of researcher, the temporal scale of sediment transport pattern targeted, and information needed. Besides, the relationship between the depth of sample and representative temporal scale should be systematically investigated in improving this methodology.

• Journal of the Korean Chemical Society
• /
• v.48 no.1
• /
• pp.17-27
• /
• 2004

A procedure based on solid phase microextraction extraction(SPME)-GC/MS has been developed for the simultaneous analysis of plasticizers. The plasticizers investigated in this study are dimethyl phthalate(DMP), diethyl phthalate(DEP), dibutyl phthalate(DBP), benzylbutyl phthalate(BBP), diethylhexyl phthalate (DEHP), di-n-octyl phthalate(DnOP). The limit of detection(LOD) was 0.163~0.299 with relative standard deciation(RSD) of 5.85~15.80% for these compounds. At water reserviors of Han, Geum, Nakdong and Sumjin rivers, only DBPand DEHP were detected at trace level, 0.192~1.270 ng/ml for DBP and 0.077~1.102 ng/ml for DEHP depending on the river.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.2
• /
• pp.1-12
• /
• 1990

Interactions between a propeller and vortex system contained in a ship stern flow is treated theoretically. A new formulation to determine the effective velocity distributions is developed, which may be immediately applicable to the design and analysis of compound propulsors under the influence of severe vortical cross-flows around ship stern. An axisymmetric shear flow is represented by a system of ring vortices and the axial variation of the stream lines due to the action of propeller is represented by a cubic function. The strengths of ring vortices, which are varying along the stream lines, are determined by the conservation of angular momentum. Two simplified effective velocity models are proposed to confirm the theory. Sample calculations using the simplified models are made to compare with the results by other investigators.

• Journal of Environmental Science International
• /
• v.12 no.12
• /
• pp.1207-1213
• /
• 2003

Osancheon creek is located in the southwest of the middle area in Korea. Weed community around the Osancheon creek, where various disturbances exert a bad influence directly on its community by human work or nature, was surveyed phytosocialogically. Our surveys have been accomplished from June, 2003 to September, 2003. Weed communities formed around the Osancheon creek were divided into several patterns and analysed. They have been divided into 8 communities. Community A: Humulus japonica community, B: Phragmites communiscommunity, C: Persicaria thunbergii community, D: Zi=ania latifolia community, E: Miscanthus saccharilflorus community, F: Echinochica crusgalli community, G: Typha orientalis community, H: Sataria viridis community. The flora surveyed in these communities was constituted of 19 families, 36 genera, 4 varieties, and 40 species. Wild plants such as Artemisia princeps var. orientalis Erigeron annuus, Bidens frondosa, Aeschynomene indica and Oenothera odorata were mostly light loving plants and higher resistant plants against the disturbance. Our result from the ranking all surveyed areas by the Bray-Curtis ordination method was very similar to the results from phytosocialogical table work.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.965-968
• /
• 2005

Roll drafting operation causes variations in the linear density of bundles because the bundle flow cannot be controlled completely by roll pairs. Defects occurring in this operation bring about many problems successively in the next processes. In this paper, we attempt to analyze the draft dynamics and the linear density irregularity based on the governing equation of a bundle motion that has been suggested in our previous studies. For analyzing the dynamic characteristics of the roll drafting operation, it is indispensable to investigate a transient state in time domain before the bundle flux reaches a steady state. However, since governing equations of bundle flow consisting of continuity and motion equations turn out to be nonlinear, and coupled between variables, the solutions for a transient state cannot be obtained by an analytical method. Therefore, we use the Finite Difference Method(FDM), particularly, the FTBS(Forward-Time Backward-Space) difference method. Then, the total equations system yields to an algebraic equations system and is solved under given initial and boundary conditions in an iterative fashion. From the simulation results, we confirm that state variables show different behavior in the transient state; e.g., the velocity distribution in the flow field changes more quickly the linear density distribution. During a transient flow in a drafting zone, the output irregularity is influenced differently by the disturbances, e.g., the variation in input bundle thickness, the drafting speed, and the draft ratio.

• Journal of Sericultural and Entomological Science
• /
• v.36 no.2
• /
• pp.147-151
• /
• 1994

This study was carried out investigate the characteristics of Habutae and Chiffon woven with silk and polyester(S/P) compound yarn. The S/P compound yarn could be produced by the automatic reeling machine with attachment of air jetting device, polyester yarn guider and tension control apparatus. The surface structure, tensile property and dyeing fastness of S/P compound fabric were examined for the fabric properties. Electron microscopy revealed that most part of S/P compound yarn was well interlaced and some silk part of compound yarn were hidden by polyester on an examination of surface of chiffon fabric. By the one bath and two step dyeing of disperse and acidic dyes, the colour fastness of S/P compound fabrics were 4 grade above. The tenacity and initial modulus of the finished S/P compound fabric were lower than those of grey and degummed fabrics, but reversed in elongation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.5
• /
• pp.495-501
• /
• 2013

This paper describes a flexible wireless telemetering system using a mesoscale cantilever sensor, which is microfabricated with a patterned thin Ni-Cu foil on a resin substrate. The dynamic validation of the sensor has been conducted in a flow. The wireless telemetry is used to obtain data regarding the oscillating flows. It is shown that the sensor is nearly independent of the environmental temperature and is suitable for application to primary healthcare and diagnostic devices. It can be easily integrated with other modules for measuring physiological parameters, e.g., blood pressure, oxygen saturation, and heart rate, to increase the convenience and reliability of diagnosis. The precision and reliability of the sensor are also dependent on the design of the analog front-end and noise reduction techniques. It is shown that the present system's minimum interval between packet transmissions is ~16 ms.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.2
• /
• pp.86-92
• /
• 2007

In this study, we tried to quantitatively study the distribution of estrogenic activity in sediment from Gwangyang Bay by E-screen assay. Besides, we compared the estrogenic activity and the concentration of chemical pollutants. The highest estrogenic activity was recorded at the stations(GY6 and GY8) close to industrial complex and the river mouth of Seomjin. These results obtained from the E-screen assay similar to those of simultaneous analytical detection of 310 chemicals. In particular, GY6 and GY8 sites are confirmed as the full agonist sites because of their RPE values were over 90% having strong estrogenic effect. Also, their EEQ(Estradiol Equivalency Quantity) values are 35.6 ng/g and 14.6 ng/g, low than that of other sites, and these results suggests that have relatively high estrogenic efficiency in Gwangyang Bay. From these results, we can estimate that the stations close to industrial complex and the river mouth of Seomjin are major sources of endocrine disrupter in Gwangyang Bay. On the other hand, when we tried to compare the endocrine disrupter activity and $COD_{Mn}$ value, that is not correlated.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.12
• /
• pp.1332-1339
• /
• 2005

The purpose of this study is to the distributive property of organic pollutants in effluents of domestic sewage treatment plants around Youngsan River using simultaneous analysis method of 310 chemicals. The numerous organic pollutants were detected in five sampling sites, and the major chemicals were pesticides, CH type chemicals such as benzenes and polycyclic compounds, ande CHO type chemicals such as phenols and phthalates. About 14 pesticides were detected in the effluent and most of them were found in summer. 1-Chlorobenzen and p-octylphenol were frequently detected in the concentration range of $0.52{\sim}0.61\;{\mu}g/L$ and $0.04{\sim}0.89\;{\mu}g/L$, respectively. Moreover, 18 kinds of endocrine disrupters include diethylphthalate were detected in effluents. From the results of this study, therefore, we confirmed that the pesticides, CH and CHO type chemicals in domestic effluents throughout Youngsan River are required specific regulation.