• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.378.1-378
• /
• 2002

DVD, HD(High Density)-DVD등의 고밀도 광 디스크의 광 기록재생장치는 고 개구율(Numerical Aperature)의 대물렌즈로 집광 빔의 크기를 소형화하여 기록용량을 증대시키고 있다. 이 경우 광축과 광 디스크의 기록면에 대한 경사는 광학적인 수차가 발생되어 신호 레벨의 저하나 기록시의 피트(pit) 형성의 오류, Crosstalk등의 문제가 발생한다. 이를 극복하기 위해 직접 디스크의 경사에 따라 제어할 수 있는 픽업 구동기가 제안되어 왔지만 주로 Half Height(12.7mm)에 사용되는 틸트 구동기였으며 Slim(6.3mm)형 틸트 구동기는 제안되지 못하였다. (중략)

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2266-2268
• /
• 2000

본 논문에서는 스캐닝 미러의 일종으로, 광저장 장치의 픽업헤드용으로 미세회전을 하면서 레이저 빔을 편향시키는 용도로 사용되는 미러를 제작하고 구동실험을 하였다. 제작된 미러의 크기는 $2400{\times}2400{\times}64{\mu}m^3$이고, 빔 스프링은 $500{\times}9.6{\times}64{\mu}m^3$이다. 니켈 전해 도금으로 29${\mu}m$ 높이의 구동 전극을 제작하였고(세가지 모델: 공기통로가 없는 전극, 공기통로와 간격이 각각 200${\mu}m$인 전극, 공기통로와 간격이 각각 100${\mu}m$인 전극), 미러판과 전극을 조립하여(미러판과 전극 사이의 간격은 각각 29${\mu}m$, 26${\mu}m$, 26${\mu}m$) 구동실험을 하였다. 공진 주파수의 계산간은 576Hz, 측정값은 3개의 미러에서 모두 568Hz이었다. 전극과 미러판의 간격이 최대 접근거리 18${\mu}m$가 되도록 미세 회전을 시켰을 때, 공기통로가 없는 전극에서는 공진 주파수가 524Hz, 공기통로가 200${\mu}m$인 전극에서는 544Hz로 각각 감쇠되었고, 공기통로가 100${\mu}m$인 전극에서는 그대로 568Hz이었다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.1 s.307
• /
• pp.1-6
• /
• 2006

The noncontact optical sensor using the hologram laser and automatic power controller is developed to measure a thickness of transparent objects and achieve excellent performance. Due to the contact between the tip of the sensor and the surface of objects, the tip is abraded. In addition the casting glass under high temperature results in extending the size of sensor body. The accuracy of the sensor is degraded due to these reasons. In this paper, to overcome these problems, we proposed a low cost non-contact optical sensor that is composed of a hologram laser unit used for optical pickup of CD player and a plastic lens. Therefore the problems caused by the contact sensor are solved by using the noncontact sensor. The noncontact sensor has to move toward the objects and obtain the focus error signal to measure a position of transparent objects. While the internal temperature of the sensor is controlled under ${\pm}0.1^{\circ}$, many trials shows ${\pm}2{\mu}m$ measurement error as excellent performance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.04a
• /
• pp.119-124
• /
• 1996

Recently, high speed optical disk drives are increasingly demanded to read or write data fastly enough. To this end, both structure and controller designs of their optical pick-ups should be improved concurrently. In this paper, the pick-up during auto-focusing motion is mathematically modelled retaining all its peculiar features. The model turns out a linear time invariant system suitable for a control design method named H$_{\infty}$ which ensures robust stability in the presence of system uncertainties. Numerical simulation are performed to demonstrate the controller robustness with appropriate performance specifications being satisfied..

• Journal of KSNVE
• /
• v.8 no.3
• /
• pp.533-541
• /
• 1998

Recently, optical disk drives are increasingly demanded to have higher speed as well as high information density, especially for applications like CD ROM drives. To this end, improvement of their optical pickup structure and control is recognized the very challenging issue. In this paper, the pickup is first analytically modelled in a plane to describe its coupled auto-focusing and auto-tracking motions. Subsequently, the model is linearized and combined with actuator dynamics for the auto-focusing system. With its unmeasurable parameters being estimated based on experimental data, an approximate I-DOF linear model is obtained neglecting the coupling term. To design the high speed and robust positional servo controller realistic design specifications are addressed, and H control method is employed based on the approximate model. Finally, taking the pickup in a commerical high speed CD ROM drive as an example performance of the designed controller is verified through realtime experiments.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.74-78
• /
• 2004

We propose a servo control method using a dome-type glass in shift-multiplexed holographic data storage. We frist store live 2-D data by shift-multiplexing in a holographic disk with 5％ variation in their. diffraction efficiencies. During read-out of the stored data, the servo control using the dome glass correctly compensates mechanical errors of the disk; the error of $\pm$0.2$^{\circ}$and run-out error of $\pm$50 ${\mu}{\textrm}{m}$. Use of the dome-type glass in servo control makes a pickup module more compact in size and easier to control than the previous method using parallel glass plate ［Sungphil Kim, et al., Hankook Kwanghak Hoeji, Vol. 14, No. 1, pp.58-64, 2003］.