• Photonics industry news
• /
• s.38
• /
• pp.16-19
• /
• 2007

2006년 국내 광산업시장은 전 세계적인 초고속인터넷망 및 FTTH 관련 서비스 확충에 따라 광통신 부품 업체의 호황과 아울러 휴대폰 부품시장, 반도체 광원(LED)분야의 전체적인 수출 및 내수시장규모가 증가한 것으로 조사됐다. 그러나 해외 원자재 구매 증가로 인해 수입 비율이 증가하고 반면 수출은 엔화, 달러 환율의 지속적인 하락에 영향을 받아 마이너스 성장한 분야도 있는 것으로 파악되었다. 광산업클러스터가 구성된 광주의 지역내 총생산은 2003년을 기준으로 하여 15조 7,229억 원으로 전국 비중은 2.2%를 차지하고 있을 정도로 열악하고 재정자립도도 6개 광역시 중에서 하위를 기록하고 있었으며 취업자 기준 산업구조도 서비스업이 80%정도를 차지할 정도로 구조적인 취약점을 안고 있었다. 이와 같은 광주경제의 어려운 상황을 근본적으로 타개하기 위하여 광주광역시가 21세기 최대의 유망산업인 광산업 육성 계획을 수립해 제시한 결과, 중앙정부 차원에서 광산업 육성 및 집적화 계획 1단계 사업(2000년~2003년)이 성공적으로 마무리 되고 현재는 2단계 사업(2004년~2008년)이 추진 중이다. 따라서 현시점에서 광산업 육성 성과를 판단할 수 있는 지표로 광주지역에 소재하고 있는 광산업체의 증가수와 매출액 등에 대하여 한국광산업진흥회에서 2006년 12월에 전수조사 하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.33-42
• /
• 2015

오늘날 연성회로기판(FCCL : Flexible Copper Clad Laminate)은 디스플레이, 스마트폰, 자동차, 항공, 의료 기기, 산업용 컨트롤 기기 등 거의 모든 고급 전자 제품들에 사용되고 있다. 특히 디스플레이 분야에서는 뛰어난 연성과 내구성을 바탕으로 경박단소화에 유리할 뿐만 아니라 구동부에 적용이 가능한 장점 등으로 그 적용처가 점점 늘어나고 있는 추세이다. 이 가운데서도 LCD와 OLED의 구동소자(Display Driver IC)를 장착하는 COF(Chip on Film)는 대표적인 연성회로기판(FCCL) 적용 부품으로서, 최근 인기를 끌고 있는 디스플레이의 제로-베젤(Zero-bezel)을 가능케 하는 핵심 부품이다. COF용 연성회로기판(FCCL) 소재로는 우수한 평탄도, 파인피치(Fine-pitch)구현성, 내굴곡성, 광투과성 등을 보유하고 있는 Sputtering Type FCCL이 사용되고 있다. 특히 최근 Display 분야의 화두가 되고 있는 POLED(Plastic-OLED) 패널을 장착한 Flexible Mobile 디스플레이의 경우, 기존의 COG(Chip on Glass) 접합방식이 아닌 COF 접합방식을 채택하고 있으며, 기존의 단면 COF보다 3배의 고해상도 구현이 가능한 양면 COF를 채택하기에 이르렀다. 기존의 COF 제작공정과 달리 Semi Additive 공정으로 제작되는 양면 COF 시장의 태동으로 양면 연성회로기판(FCCL)의 수요 증가가 예상되는 등 최근 디스플레이 기술 발전은 소재 분야에도 큰 변화를 잉태하고 있다. 이러한 최근 디스플레이 업계의 고해상도, 고속 신호 전송, 슬림화, Flexible 추세에 대응 가능한 최적의 특성을 보유하고 있는 Sputtering Type FCCL을 중심으로 디스플레이의 발전에 대응하는 소재의 기술 개발 동향을 살펴보고자 한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.7
• /
• pp.13-20
• /
• 2004

In order to set up the design of micro optical bench, optical coupling efficiencies of two sets of test benches are calculated. Simple linear connections of incoming and outgoing optical fibers with and without ball lenses are designed. Positional errors that are possible in actual fabrication processes we considered in the calculations and their tolerances are determined from -3 ㏈ conditions. For a simple fiber-to-fiber connection, the lateral misalignment should be limited to 2.7 um and tilt error 5.8o. In case of the fiber-to-fiber with ball lens, the working distance between fibers can be extended over 60 um. The optical coupling efficiency depends strongly on the positional errors of ball lenses along the optical axis, and it is also found that the lateral and vertical positional errors should be considered simultaneously in order to keep the high coupling efficiency.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.325-330
• /
• 2004

We fabricated a vacuum ultraviolet spectre-reflectometer which consists of a deuterium light source, a vacuum monochromator, and a sample chamber and detector module. The operation was performed in the ultraviolet spectral ranges between 115 nm and 330 nm at the vacuum pressure of 3.0 ${\times}$ 10$^{-4}$ Pa. The wavelength of the vacuum monochromator was calibrated with the line spectrum of a low pressure Mercury lamp of 253.652 nm and 184.95 nm wavelengths, and its resolution was 0.012 nm, and the precision of wavelength was $\pm$ 0.03 nm. With this reflectometer and a deuterium lamp, we measured the spectral regular transmittance and reflectance of materials(MgF$_2$, CaF$_2$, BaF$_2$, SiO$_2$, Sapphire) used as optical components over the spectral range between 115 nm and 230 nm.

• Journal of Korea Port Economic Association
• /
• v.26 no.2
• /
• pp.36-48
• /
• 2010

This primary purpose of this study is to suggest strategy a green-logistics strategy of Gwanyang bay area. The Green growth is the new growth concept based on the low carbon and environment-friendly industry. The new paradigm on the global economy growth requests a established logistics industry to be shifted into establishing the environment-friendly green logistics system. Some findings derided from this study are follows: Frist, in order to establish a environment-friendly green growth foundation, it is necessary to attract a green industry such as solar cell, wind force, hybrid car etc. Second, a green logistics system has to be established, including a green port strategy and reducing emission of carbon.

• Current Photovoltaic Research
• /
• v.7 no.3
• /
• pp.65-70
• /
• 2019

As a demand of higher power photovoltaic modules, shingled, multi-busbar, half-cell, and bifacial techniques are developed. Multi-busbar module has advantage for large amount of light havesting. And, half-cell is high power module for reducing resistive losses and higher shade tolerance. Recently, researches on multi-busbar is focused on reliability according to adhesion and intermetallic compound between Sn-Pb solder and Ag electrode. And half-cell module is researched to comparing with full-sized cell module for structure difference. In this study, we investigated the factors affecting to efficiency and adhesion of multi-wires half-cell module according to wire thickness, solder thickness, and flux. The results of solar simulator and peel test was that peel strength and efficiency of soldered cell is not related. But samples with flux including high solid material showed high efficiency. The results of FE-SEM and EDX line scan on cross-section between wire and Ag electrode for different flux showed thickness of solder joint between wire and Ag electrode is increasing through solid material increasing. Flux including high solid material would affect to solder behavior on Ag electrode. Higher solid material occurred lower growth of IMC layer because solder permeate to sider of wire ribbon than Ag electrode. And it increased fill factor for high efficiency. In soldering process, amount of solid material in flux and solder thickness are the factor related with characteristic of soldered photovoltaic cell.

• Economic and Environmental Geology
• /
• v.56 no.2
• /
• pp.155-166
• /
• 2023

Through COVID-19, the importance of supply chain management of raw material minerals has been maximized. In particular, supply chain management is important for rare metals, which are difficult to manage demand and supply, in order to secure raw materials for the parts and materials industry that Korea is actively promoting. In this study, a system was established and evaluated to select Critical minerals that need to respond to Korea's industrial structure and global risks by quantifying tangible and intangible risk factors. Global Supply Concentration, Supplying country risk, Policy Social Environment Regulation, Domestic Import Instability, Risk responsiveness, Market Scale, Demand Fluctuation and Economic Importance were evaluated as evaluation indicators. The degree of risk and risk impact were quantitatively measured using the criticality matrix-criticality level. After evaluating 40 types of minerals used in domestic new growth businesses, 15 types of Critical minerals(Li, Pt, Co, V, REE, Mg, Mo, Cr, Ti, W, C, Ni, Al, Mn, Si) in Korea were selected. The results are expected to be used to establish policies to strengthen resource security and to make decisions to form a company's raw material portfolio.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.3 s.333
• /
• pp.25-34
• /
• 2005

In this paper, we analyzed and measured the electrical crosstalk characteristics of a triplex transceiver module for ethernet Passive optical networks(EPONS). And we improved the electrical crosstalk levels using Dummy ground lines with signal lines. The triplex transceiver module consists of a laser diode as a transmitter, a digital photodetector as a digital data receiver, and a analog photodetector as a community antenna television signal receiver. And there are integrated on silicon substrate. The digital receiver and analog receiver sensitivity have to meet -24 dBm at $BER=10^{-l2}$ and -7.7 dBm at 44 dB SNR. And the electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysis and measurement results, the proposed silicon substrate structure that contains the Dummy ground line with $100\;{\mu}m$ space from signal lines and separates 4 mm among devices respectively, is satisfied the electrical crosstalk level compared to simple structure. This proposed structure can be easily implemented with design convenience and greatly reduced the silicon substrate size about $50\%$.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.3
• /
• pp.28-35
• /
• 2016

Forging operations are non-stationary processes occurring because of indirect pressure, generally, under conditions of three-dimensional stress and deformation. Furthermore, due to friction and the constraints of die geometry, deformation is not homogeneous. Material flow and deformation are largely determined by the shape of the tools. It is well known that net-shape forging can improve the mechanical strength of the final product as well as reduce material waste. Oxygen-free copper that is used for electrical and electronic components has excellent electrical and thermal conductivity. Oxygen-free copper parts have a low productivity in cutting process. Thus, the forging process is performed in order to improve the low productivity in cutting process. The forging of oxygen-free copper for electrode body parts was modeled using finite element simulation and forging experiments that were conducted for producing electrode body parts at room temperature. In order to reduce the cost of cutting products, the forging was performed in a closed cavity to obtain near-net or net-shape parts.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.269-269
• /
• 2007

최근 평판디스플레이 산업이 성장함에 따라 품질향상을 위한 연구가 활발히 진행중이며 또한, 부품 소재 개발에 박차를 가하고 있다. 대형 평판디스플레이 중 낮은 전력소모와 광시야각이 우수한 TFT-LCD가 각광받고 있다. TFT-LCD 소자의 투명전극으로 사용되기 위해서는 면저항 10~1k Ohm/sq., 광투과율 85% 이상의 특성이 요구되며 ITO(Indium Tin Oxide의 약자) 타겟을 스퍼터링한 박막이 일반적으로 사용되고 있다. 본 연구에서는 $In_2O_3$ 나노 분말 제조 공법으로 제작된 ITO 타겟을 사용하여 양산성 및 대형화에 적합한 DC 마그네트론 스퍼터 방식으로 투명전극을 제조하였다. 일반적으로 사용되는 고정식 DC 마그네트론 스퍼터 방식은 타겟표면에 재증착(back deposition)되는 저급산화물로 인해 이물 또는 노즐(Nodule) 이 형성되고 이로 인해 비이상적이고 불안정한 방전 플라즈마가 박막의 특성을 저하시킨다. 이러한 문제점을 해결하기 위해 이동식 DC 마그네트론 스퍼터 방식을 채택하였으며 대형 타겟을 이용한 대형화 기판 제작과 안정적인 sputter yield로 인해 uniformity가 우수한 ITO 박막을 제조하였다. ITO 박막의 저면저항 고투과율 특성을 구현하기 위해 공정변수인 산소분압, 전류밀도(DC power) 그리고 증착온도에 따른 ITO 박막의 미세조직과 결정성을 관찰하였으며 전기적 특성을 분석하였다.