• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.595-595
• /
• 2013

본 연구에서는 brush painting공법을 이용하여 인쇄형 유기태양전지에 적용이 가능한 ITO nanoparticle/Ag nanowire/ITO nanoparticle (Nano IAI) 다층 하이브리드 투명 전극의 전기적, 광학적, 구조적 특성을 연구하였다. 평균 25 nm 사이즈의 ITO 나노 입자로 구성된 ITO 나노 잉크와 직경 20~25 nm의 Ag nanowire 잉크를 기반으로 Brush painting 기술을 적용해 상온, 상압에서 낮은 면저항과 높은 투과도를 가지는 Nano IAI 하이브리드 투명 전극을 제작하였다. Nano IAI 투명 전극 제작 시 일정한 두께에서 Ag nanowire 코팅을 위한 brush painting 횟수를 변수로 하여 최적화 공정을 진행하였으며, Ag nanowire가 2번 brush painting 된 Nano IAI 다층 하이브리드 투명전극은 $3.4{\times}10^{-3}$ ohm-cm의 비저항과 52.33 ohm/square의 낮은 면저항을 나타내었다. 이를 통해 효과적으로Ag nanowire를 ITO nanoparticle 사이에 삽입할 경우, 고온의 열처리 공정을 통하지 않고 낮은 면저항을 가지는 인쇄형 투명 전극을 구현할 수 있음을 확인할 수 있었다. 특히 Nano IAI 다층 하이브리드 전극은 83.83%의 높은 투과도를 나타내는데 이는 삽입된 Ag Nanowire의 폭과 길이가 나노 사이즈이기 때문에 입사되는 빛이 흡수되기보다 대부분 투과하기 때문으로 사료된다. 또한, XRD 분석과 HRTEM 분석을 통해 Nano IAI 다층 하이브리드 투명전극의 전도 메커니즘을 설명하였다. 이와 같은 우수한 전기적, 광학적 특성은 brush painting 기법으로 제작된 Nano IAI 다층 하이브리드 투명 전극의 인쇄형 유기태양전지 적용 가능성을 나타낸다.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.186-190
• /
• 1998

We fabricated a diode-side pumped high power Nd:YAG laser with a gold coated flow tube(diameter of 10mm) and three sets of 140W diode bar. The diameter of Nd:YAG rod was 6mm and its length was 130mm. We obtained 130W cw power from a linear resonator with an 11% output coupler, which corresponds to the slope efficiency of 43% and the optical efficiency of 31%. The measured beam quality factor(M$^2$) reached about 85 which is fairly large due to the large size of the rod. Thermal lensing of the rod was measured to be 5.3-7.4D/$kW_{pump}$ when the laser was operating.

• Korean Journal of Optics and Photonics
• /
• v.7 no.4
• /
• pp.390-396
• /
• 1996

A pulsed Ti : sapphire laser with a Z-folded cavity, which was pumped by a frequency-doubled Nd : YAG laser, was developed. A laser output energy of 822 $\mu$J with a pulsewidth of 5 ns and an output efficiency of 27.4% was obtained at a center wavelength of 790 nm using an output coupler of 18% reflectance. The slope efficiency was 35%. The output beam diameter was 0.9 mm, and the divergence angle was 1.8 mrad. The spectrum tunability was about 120 nm from 740 nm to 860 nm with a FWHM of 90 nm at an 18% output coupler and a pumping energy of 3 mJ.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.46-50
• /
• 2004

Images were acquired by the modulation of terahertz electromagnetic signals and compared by modulation frequencies. For the real-time acquisition of images a fast scanning method has been adopted utilizing a galvanometer. The acquired time domain waveforms were transformed into frequency domain data by fast Fourier transformations (FFT). We chose some frequency components to compare the resolution of images. The beam profiles at the focal position were measured by a knife-edge technique. Beam diameter was shown to decrease as the frequency increased. By scanning one- and two-dimensional samples a significant image enhancement was observed with the frequency increment. A nondesouctive imaging system using ㎔ electromagnetic pulses was also demonstrated.

• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.333-339
• /
• 1994

We fabricated a single mode fiber pigtailed PIN-preamplifier front-end receiver module for the high speed optical receiver. Hybrid method was used to integrate GaInAs PIN photodiode and transimpedance type GaAs preamplifier. The capacitance and the diameter of light receiving area of PIN photodiode were 0.35 pF and $20{\mu}m$ respectively. The -3 dB cut-off frequency of PIN-preamplifier module was above 2 GHz, and the sensitivity of the module at 2.5 Gbps NRZ $(PRBS=2^{23}-1)$ signal was -25.2 dBm at $10^{-9}$ BER. > BER.

• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.286-291
• /
• 2007

We theoretically investigated the far-field radiation pattern of epi-signal from a polystyrene sphere in coherent anti-Stokes Raman scattering (CARS) microscopy with an objective lens of high numerical aperture. We calculated the field distribution of the incident laser beams under the tight-focusing condition and the far-field radiation pattern through coherent addition of radiation from the nonlinear polarizations (Hertzian dipoles) as the origin of CARS signal generation. The epi-radiation patterns for polystyrene spheres of different diameters are calculated, and the pattern of a sphere is also compared with that of a shell fer a diameter of 1100 nm. We finally show how the radiation pattern of the polystyrene sphere changes as the center of the sphere shifts from the focus of the beam.

• The Journal of the Korea Contents Association
• /
• v.6 no.12
• /
• pp.163-168
• /
• 2006

Hg-free fluorescent lamps were fabricated and electro-optical characterization were measured for using LCD backlight. PDP phosphors, nitro-cellulose and n-butyl acetate were mixed and coated uniformly in glass tube without stain. The glass tubes were sintered at $550^{\circ}C$ for 20 minutes, vacuumed to $10^{-6}$ torr and supplied discharge gas by using a gas mixture. After various experiment about phosphors thickness and inner diameter of glass tube, the appropriate phosphors thickness and inner diameter of glass tube were obtained. The luminance and luminous efficiency of manufactured fluorescent lamps with Ne+Xe discharge gas were $6,270cd/m^2$, 13 lm/W under 75 kHz sinusoidal wave voltage, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.577-577
• /
• 2012

자성나노유체(ferrofluid)는 계면활성제로 코팅된 직경 10 nm인 자성나노입자(magnetic nanoparticle)가 바탕액체(물 또는 오일 등)에 분산하고 있는 액체이다. 최근 연구에 의하면 자성나노 유체가 변압기 절연유로 사용될 경우 열전달 및 절연 특성이 향상된다고 보고되고 있다. 또한 자성나노유체에 포함된 자성나노입자는 영구자석 및 전자석 등에 의한 외부 자기장뿐만 아니라, 두 전극 사이에 인가된 전기장에 의한 유도자기장에 영향을 받는다고 한다. 본 연구에서는 두 전극 사이 전압을 1 kV로 인가한 경우에서 광학현미경을 이용한 자성나노입자의 마이크로 채널(microchannel) 내부 이동특성 관측 및 Maxwell 방정식을 이용한 전자기장 수치해석을 수행하였다. 실험 및 해석 결과를 통하여 자성나노유체에 포함된 자성나노입자가 인가된 전기장에 의하여 발생되는 이동특성을 분석하고, 선행연구에서 보고된 절연특성 변화에 관한 상관관계에 대해 고찰하였다. 광학현미경 관측 결과로부터 전기장이 인가되지 않은 경우에 균일하게 분산되어 있는 자성나노입자는 전기장 인가에 따라 발생되는 유도자기장에 의하여 입자 간의 뭉침(agglomeration) 현상과 전극 주위로 이동하려는 성질을 확인하였다. 또한 수치해석 결과로부터 자성나노입자의 존재로 인하여 전극 사이의 전기장 강도와 자속밀도가 증가함을 확인하였으며, 자성나노입자의 이동을 유발하는 유도자기장이 전극 주위에서 큰 것을 파악할 수 있었다. 이와 같은 결과는 자성나노입자가 변압기 절연유에 첨가된 경우우 절연파괴전압이 변화되는 이유를 설명할 수 있는 근거가 된다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.41-48
• /
• 2009

Laser diode is used as a crucial part for minimization of terrestrial 3D Laser Scanner. But it has certain limitations such as oval beam shape and inevitable astigmatism. In order to realize a parallel light with beam divergence below 1 mrad, These problems of laser diode can be solved through beam shaping by Pinhole and Aperture. Finally, this study could materialize a collimated beam with 0.3 mrad beam divergence angle and 3mm diameter, that performance and checked by using real manufacture.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.31-36
• /
• 2007

In order to evaluate the performance of phone camera lenses, we have developed equipment for measuring the modulation transfer function(MTF) for small size lenses. The equipment is composed of an an image analyzer, object generator, and a lens mount. The object generator is rotated for on and off-axis measurement. The lens mount is of horizontal type and tiltable for precise alignment to the optical axis. After the initial alignment process, the measurement is done within 10 seconds automatically