• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4C
• /
• pp.329-337
• /
• 2012

Capsule Endoscope(CE) is a capsule-shaped electronic device which can examine the lesions in digestive tract of human body. Recently the medical procedure using capsule endoscope is receiving great attention to both doctors and patients, since the conventional push-typed endoscope using cables brings great pain and fear to the patients. The technique was firstly available in 2000 and is based on a convergence techniques among BT(Bio Technology), IT(Information Technology), and NT(Nano Technology). The device consists of an optical parts including LEDs(Light Emitting Diodes), an image sensor, a communication module and a power module. Capsule endoscope is the embodiment of the state-of-the art technology and requires key technologies in the various engineering fields. Therefore, in this paper, we introduce the composition of the capsule endoscope system, and compare the communication method between RF(Radio Frequency) communication and HBC(Human Body Communication), which are typically used for data transmission in the capsule endoscope. Furthermore, we analyze the specification of commercialized capsule endoscopes and present the future developments and technical challenges.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.1-6
• /
• 2011

In this paper, an 1.5Gbit/s wireless data transmission system using the carrier frequency of 300 GHz band was implemented. The RF front-end was composed of schottky diode sub-harmonic mixer, frequency tripler, and horn antennas for transmitter and receiver, respectively. The LO frequencies of sub-harmonic mixer are 150GHz for transmit chain and 156GHz for receive chain. The ASK(Amplitude Shift Keying) modulation was used in the transmitter and the envelope detection method was used in the heterodyne receiver. The conversion loss of sub-harmonic mixer and implementation system loss were measured to be 9.8dB and 1.2dB, respectively. The 1.5Gbit/s video signal with HD-SDI format was transmitted over wireless distance of 40cm without optical lens(4.2m with optical lens) and displayed on HDTV at the transmitted average output power of $20{\mu}W$.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.3
• /
• pp.94-99
• /
• 2003

In this paper, a rotation invariant fingerprint identification system is implemented using the circular harmonic filter and phase only correlator. We extracted the phase component from input fingerprint image and correlate it with the circular harmonic filter of the reference fingerprint image by POC. The input image is obtained using a prism operating in the internal full reflection mode. Then the input image is transformed to two dimensional Fourier spectrum in optical way and the phase component is extracted using a digital system from the spectrum. Because composed of the optical system and digital algorithm, the proposed system has the advantages of the two technologies such as realtime parallel processing property of the optics and the flexibility of the digital system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.534-541
• /
• 2021

This study aims to establish an efficient future technology development strategy in the information and telecommunications industry by grasping related technology trends and fusion complexity through an analysis based on standard patents. Analyzing 1,983 patents related to the information and telecommunications industry identified the trends in major patent applicants and detailed technologies in the world. In addition, technology trends were investigated through keyword analysis to examine the degree of complexity in information and communications technology, confirming the direction of research in information technology. Electronic component and wireless communications fields have relatively few standard patents, but they are highly convergent with other industrial technologies. Computer information processes and communication and broadcasting technologies are highly related to each other, so they can be used as standard fusion technologies in standard patents. In addition, standardization activities in optical and image/sound devices are found to be high.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.626-629
• /
• 2003

In this paper, a system that implementation of Biometric System Using RF-ID. We organize a certification system which the security is strengthened, the information is flowed out and the presentation will do the possibility not to be abused. The loss of the credit card and problems which there is many of forgery back are happening. To solve such problems, We organized the system to use after we stored a fingerprint data at RF Card and going through certification necessary formalities. Various research to be related uses this system and is predicted. The development to common use goods will be possible through a certification procedure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9A
• /
• pp.1306-1312
• /
• 2000

The quality loss of a X-band transmitter has been derived by means of MC simulation. The transmitter as a payload of LEO(Low Earth Orbit) satellite is capable of the down transmission the image data of hundreds Mbps generated from the Electro-Optical Instrument in real time. The parameters such as data asymmetry amplitude unbalance,phase unbalance, wave shaping and channel interference are included in the quality loss simulation Assuming that normally distributed gaussian noise is simply added to the channel, the quality loss of 0.7 dB has been obtained through this simulation based on a 95% confidence interval. The obtained quality loss can be applied to the link budgets as an additional loss item.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.11A
• /
• pp.1661-1671
• /
• 2000

본 고에서는 한국통신(Korea Telecom) IMT-2000 시험시스템(이하: Trial system 라고 함) 단말기용 전력증폭단으로 적용하기 위한 다단구동증폭기 및 전력증폭기를 GaAs MMIC로 설계 구현하는 기술을 제시하였다. 설계된 구동증폭기는 3단으로구성하여 RF(Radia Frequency) 송신신호(1955$\pm$70MHz)대역에서 2단 (중간단)의 이득 조정범위가 40 dB이상이 될 수 있도록 능동부품인 MESFET를 Cascade 형으로 구성하고 MESFET의 게이트(gate)에 조정전압을 인가하는 증폭기를 설계하여 GaAs MMIC화 1 침(크기4$\times$5 mm)으로 제작하였다. 아울러, 본 논문에서는 제시한 구동증폭기는 동작주파수 대역폭 범위기 3.5배이고 출력전력은 15dBmm 이며, 출력전력이득이 25~27dB이고 반사계수는 -15~20dB이며 이득평탄도 3dB(동작주파수 대역폭내)로써 Trial system용 단말기의 최종단인 전력증폭단의 출력단 특성을 효과적으로 나타내었다. 그리고, 전력 증폭기는 2개의 입력단에서 출력되는 신호를 분배하는 전력분배기와 병렬구조인 4개의 증폭단에서 출력되는 출력신호를 외부에서 접속하는 전력결합기를 접소하여 구성하였으며 RF(Radio Frequency) 주파수(1955 $\pm$70NHz)에서 대역폭을 4배로 설계하여 광대역인 대역폭을 구현하였고 출력전력은 570mW이며, 출력부가효율(PAE; Power Added Efficency)가 -15$\pm$20dB이고, 이득 평탄도(Gain flatness)는 동작주파수 대역내에서 0.5dB이며 입출력 전압정재파비(Input & Output VSWR)가 13이하인 고출력 전력증포기를 GaAs MMIC화 1칩 (크기; 3$\times$4mm)으로 제작하였다.의 다양성이나 편리성으로 변화하는 것이 국적을 바꾸는 것보다 어려운 시 대가 멀지 않은 미래에 도래할 것이다. 신세기 통신 과 SK 텔레콤에는 현재 1,300만명이 넘 는 고객이 있으며. 이들 고객은 어 이상 음성통화 중심의 이동전화 고객이 아니라 신세기 통신과 SK텔레콤이 함께 구축해 나갈 거대란 무선 네트워크 사회에서 정보화 시대를 살아 갈 회원들이다. '컨텐츠의 시대'가 개막되는 것이며, 신세기통신과 SK텔레콤은 선의의 경쟁 과 협력을 통해 이동인터넷 서비스의 컨텐츠를 개발해 나가게 될 것이다. 3배가 높았다. 효소 활성에 필수적인 물의 양에 따른 DIAION WA30의 라세미화 효율에 관하여 실험한 결과, 물의 양이 증가할수록 그 효율은 감소하였다. DIAION WA30을 라세미화 촉매로 사용하여 아이소옥탄 내에서 라세믹 나프록센 2,2,2-트리플로로에틸 씨오에스터의 효소적 DKR 반응을 수행해 보았다. 그 결과 DIAION WA30을 사용하지 않은 경우에 비해 반응 전환율과 생성물의 광학 순도는 급격히 향상되었다. 전통적 광학분할 반응의 최대 50%라는 전환율의 제한이 본 연구에서 찾은 DIAION WA30을 첨가함으로써 성공적으로 극복되었다. 또한 고체 염기촉매인 DIAION WA30의 사용은 라세미화 촉매의 회수 및 재사용이 가능하게 해준다.해준다.다. TN5 세포주를 0.2 L 규모 (1 L spinner flask)oJl에서 세포간의 응집현상 없이 부유배양에 적응,배양시킨 후 세포성장 시기에 따른 발현을 조사한 결과 1 MOI의 감염조건 하에서는 $0.6\times10^6$cell/mL의 early exponential시기의 세포밀도에서 72시간 배양하였을 대 최대 발현양을 나타내었다. 나타내었다. $\beta$4 integrin의 표현이 침투 능력을 높이는 역할을 하나 이때에는 laminin과 같은 리간드와의 특이

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.77-83
• /
• 2006

In this paper, we designed, constructed and evaluated the system for the FTTH suited to a residence and apartment using CWDM-PON techniques. These systems have capacity to service at 100Mbps rate to 384 users in the same breath. Also, the services include the internet, CATV, IPTV and wireless LAN. In the case of ire network, the data could be transmitted by UTP cable and optical fiber and case of wireless one, the data transmitted using WLAN. The distance between the cental office and the user is 20km and the data rate is 100Mbps maximum. Of course, the optical network used just one fiber optical core. For the basic material, we obtained the characteristics of optical transceiver module, Mux/Demux and transmission qualities depends on the environment.

• Smart Media Journal
• /
• v.12 no.3
• /
• pp.49-59
• /
• 2023

Optical Camera Communication (OCC), known as the next-generation wireless communication technology, is currently under extensive research. The performance of OCC technology is affected by the communication environment, and various strategies are being studied to improve it. Among them, the most prominent method is applying convolutional neural networks (CNN) to the receiver of OCC using deep learning technology. However, in most studies, CNN is simply used to detect the transmitter. In this paper, we experiment with applying the convolutional neural network not only for transmitter detection but also for the Rx demodulation system. We hypothesize that, since the data images of the OCC system are relatively simple to classify compared to other image datasets, high accuracy results will appear in most CNN models. To prove this hypothesis, we designed and implemented an OCC system to collect data and applied it to 12 different CNN models for experimentation. The experimental results showed that not only high-performance CNN models with many parameters but also lightweight CNN models achieved an accuracy of over 99%. Through this, we confirmed the feasibility of applying the OCC system in real-time on mobile devices such as smartphones.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1935-1941
• /
• 2021

In order to develop an algorithm using deep learning, which has been recently applied to various fields, it is necessary to have rich, high-quality learning data. In this paper, we propose an acquisition system for biological signals that simultaneously collects bio-signal data such as optical videos, thermal videos, and voices, which are mainly used in developing deep learning algorithms and useful in derivation of information, and transmit them to the server. To increase the portability of the collector, it was made based on Raspberry Pi, and the collected data is transmitted to the server through the wireless Internet. To enable simultaneous data collection from multiple collectors, an ID for login was assigned to each subject, and this was reflected in the database to facilitate data management. By presenting an example of biological data collection for fatigue measurement, we prove the application of the proposed acquisition system.