• Korean Journal of Optics and Photonics
• /
• v.21 no.4
• /
• pp.151-160
• /
• 2010

When the optical image stabilization is implemented by moving one of the lens groups in a zoom system, decentration should be considered in the optical design process. Although it is partially possible to calibrate optical performances in an optical system with non-symmetrical elements by using a lot of commercial software, the results of calibrating longitudinal aberrations have some calibration errors because of the lack of precise consideration of decentered optical systems. In particular, the amount of distortion in paraxial ray tracing is different from the experimental value because paraxial ray tracing in the optical system is not useful. In this paper, in order to solve this problem being from various commercial lens design software, the set of equations of paraxial ray tracing in a zoom lens system with the non-symmetrical elements like decentration or tilt are theoretically induced. Then, the methods to calibrate the equations of longitudinal aberrations by using these equations in a non-symmetrical optical system are presented. The method of calibrating longitudinal aberrations can in practice be used to correct hand shaking effects in a zoom lens system.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.84-93
• /
• 2016

Plant factories with artificial lights require a large amount of electrical energy for lighting; therefore, enhancement of light use efficiency will decrease the cost of plant production. The objective of this study was to enhance the light use efficiency by using filters to diffuse the light from LED sources in plant factory conditions. The two treatments used diffuse glasses with haze factors of 40% and 80%, and a control without the filter. For each treatment, canopy light distribution was evaluated by a 3-D ray tracing method and canopy photosynthesis was measured with a sealed acrylic chamber. Sixteen lettuces for each treatment were cultivated hydroponically in a plant factory for 28 days after transplanting and their growth was compared. Simulation results showed that the light absorption was concentrated on the upper part of the lettuce canopy in treatments and control. The control showed particularly poor canopy light distribution with hotspots of light intensity; thus the light use efficiency decreased compared to the treatments. Total light absorption was the highest in the control; however, the amount of effective light absorption was higher in treatments than the control, and was highest in treatment using filters with a haze factor of 80%. Canopy photosynthesis and plant growth were significantly higher in all the treatments. In conclusion, application of the diffuse glass filters enhanced the canopy light distribution, photosynthesis, and growth of the plants under LED lighting, resulting in enhanced the light use efficiency in plant factory conditions.

• Korean Journal of Optics and Photonics
• /
• v.26 no.3
• /
• pp.139-146
• /
• 2015

The effects of a dielectric multilayer mirror on the efficiency of organic light-emitting diodes (OLEDs) were investigated by using optical simulation. Adoption of a dielectric mirror consisting of alternating SiN and $SiO_2$ layers narrowed the emission spectrum due to the microcavity effect, and increased the outcoupling efficiency by a few percent. The layer thicknesses of the dielectric mirror were adjusted to change the wavelength of the resonance mode, which may be used to increase the color purity.

• The Journal of Natural Sciences
• /
• v.16 no.1
• /
• pp.31-37
• /
• 2005

We have developed an algorithm to determine the position from the image points in a lensmeter with 6-sided prism lens. The positions of the image points which are formed by six prisms depends on the decenter position of a test lens and can be calculated by skew ray tracing. The optical characteristics of the lens meter was analyzed using the Code V program and the positions of the image points was expressed as a function of the decenter position of the test lens. By minimizing the expectation error, we can determine the decenter position position of a test lens from the image positions.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1046-1058
• /
• 1996

In this paper, we describe an abvanced medical diagnostic system using multimedia technologies in netwok environments. In the system, docotors in remote sites perorm medicl diagnosis by exchanging information about patients and 3-D medicl images of malfunctioning body parts, which are reconstructed from 2-D images such as MRI, CT, CR, Angio. The diagnosic conferencing system controls the conferencing process by exchanging audio, information about patients, 3-D medical images and control data. 3-D medicl images are reconstructed by a ray casting method that uses an nalytical integration. Medical databae conists of absic information about patients, Information about medicl images, users, results of dianosis.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.306-311
• /
• 2003

In this paper, we modeled the incident beam in order to analyze and evaluate the optical thin film device for wavelength division multiplexing in optical telecommunication network. As applied ray tracing method to the optical path, we were compared the accuracy of coupling efficiency simulated by two modeling methods. In the results of sinulation, ceil modeling method was preferred to annual modeling method in micro-optic device because of accuracy for coupling efficiency and Gaussian intensity distribution. In the results of optimal simulation for optical device using thin film filter, the distance (d1) between optical fiber and GRIN lens, the distance (d2) between GRIN lens and thin film filter and the coupling efficiency were 0.24 mm, 0.25 mm and -0.11 ㏈ respectively. As d2 was displaced at 0.25 mm and d1 was varied in order to evaluate the optimal value, d1 and maximum coupling efficiency were 0.24 mm and -0.35㏈, respectively. Then the results of experiment were corresponded to that of optimal simulation by cell modeling and it was possible to analyze the performance for optical device using thin film filter by the simulation.

• Journal of Korea Game Society
• /
• v.6 no.2
• /
• pp.45-50
• /
• 2006

In order to generate a photo-realistic synthesized image, we should reconstruct light environment by 3D analysis of scene. This paper presents a novel method for identifying the positions and characteristics of the lights-the global and local lights-in the real image, which are used to illuminate the synthetic objects. First, we generate High Dynamic Range(HDR) radiance map from omni-directional images taken by a digital camera with a fisheye lens. Then, the positions of the camera and light sources in the scene are identified automatically from the correspondences between images without a priori camera calibration. Types of the light sources are classified according to whether they illuminate the whole scene, and then we reconstruct 3D illumination environment. Experimental results showed that the proposed method with distributed ray tracing makes it possible to achieve photo-realistic image synthesis. It is expected that animators and lighting experts for the film and animation industry would benefit highly from it.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2117-2122
• /
• 2015

Wide FOV(Field-of-View) is required to contain much more visual information in a single image. The wide FOV imaging system has many industrial applications such as surveillance, security, tele-conference, and mobile robots. In order to obtain a wide FOV panorama image, an imaging system with hyperbolic cylinder mirror is proposed in this paper. Because the horizontal FOV is more important than the vertical FOV in general, a hyperbolic cylinder mirror is designed in this paper, that has a hyperbolic curve in the horizontal surface and is the same as a planar mirror in the vertical axis. Imaging model of the proposed imaging system is presented by ray tracing method and the hyperbolic cylinder mirror is implemented. The imaging performance of wide FOV is verified by experiments in this paper. This imaging system is cost-effective and is possible to acquire a wide panorama image having 210 degree horizontal FOV in real-time without an extra image processing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3C
• /
• pp.255-261
• /
• 2008

Conventional look-up table(LT) has gained a lot of speed increase in generation of digital holograms for 3D objects, but it has required an enormous memory size of the LT. In this paper, a novel approach to dramatically reduce the size of the conventional LT, still keeping its advantage of fast computational speed is proposed, which is called here a N-LT(novel look-up table) method. In the proposed method, only the fringe patterns of the center points on each image plane are pre-calculated, called elemental fringe patterns and stored in the look-up table. Then, the fringe patterns for other object points on each image plane can be obtained by simply shifting this pre-calculated elemental fringe pattern according to the displaced values from the center to those points and adding them together. Some experimental results revealed that the computational speed and the required memory size of the proposed approach are found to be 48.7 times faster than that of the ray-tracing method and 217 times smaller than that of the conventional LT method, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.7
• /
• pp.831-839
• /
• 2012

In this paper, an exponential model of Korea is proposed to minimize an altitude-error of high-altitude target due to atmosphere refraction at radar system. The relation between surface refractivity and refractivity gradient, which is extracted using the least square fit from the measured data at 7 weather stations, is applied to the exponential model. And in order to verify the proposed model, the altitude-errors for a standard atmosphere, a CRPL(Central Radio Propagation Lab.) exponential model, the proposed model are extracted and analyzed using a ray tracing. As a result, the proposed model can improve the altitude estimation performance of radar compared to conventional atmosphere refractive index models.