• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.1
• /
• pp.29-34
• /
• 2003

Recent reports on the phagotrophic feeding of M. rubrum are based on cultivation experiments with novel isolates of this ciliate species from Gomso Bay, Korea. Photo-adapted cryptophyte(CR-MAL01) cultures at high light of 100 $\mu$mol photons m$^{-2}$ s$^{-1}$ (HL) and low light of 10 $\mu$mol photons m$^{-2}$ s$^{-1}$ (LL) were fed to M. rubrum (MR-MAL01) cultures under HL and LL conditions, respectively. Absorbance spectrum by LL M. rubrum showed the same peak at wavelengths around 542nm as that by LL cryptophyte prey, which was not showed in HL M. rubrum. This result supports the implication that light utilization and absorption pattern of M. rubrum population must depend on the status of photo-adaptation of the co-existing population of prey cryptophyte. Consequences of the present research results were discussed in relation to the function of the prey cryptophyte and phagotrophic M. rubrum in marine microbial ecosystem.

• Journal of the Korean Vacuum Society
• /
• v.6 no.3
• /
• pp.213-219
• /
• 1997

The plasma polymerized styrene films were prepared by using an inter-electrode capacitively coupled gas-flow-type reactor, and the effects of plasma polymerization condition on the molecular weight distribution were investigated by Fourier Transform Infrared (FT-IR), Pyrolysis Gas Chromatography(PyGC), Differential Scanning Calorimetry(DSC) and Gel Permeation Chromatography(GPC). From the above results, the very cross-linked films different from chemical characteristics of the starting monomer were taken out, and it is realized that the molecular structure, cross linking density, and molecular weight distribution could be controlled by changing the parameters such as deposition pressure, deposition power and gas flow rate. Accordingly, it is suggested that plasma polymerization method performed by inter-electrode capacitively coupled gas-flow-type reactor has good characteristics for manufacturing the functional organic thin films which can be applied in sensors, opto-electric device, photo-resist by changing the polymerization parameters.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.529-532
• /
• 1999

본 연구에서는 유기 전기 발광 소자에서 녹색 발광층으로 사용되는 terbium(Tb) complexes와 europium(Eu) complex, 정공 수송층으로 사용되는 TPD (N, N\`-diphenyl-N,\`(3-methylphenyl)-1, 1\`biphenyl-4, 4\`-diamine), 그리고 전자 수송층으로 사용되는 Alq$_{3}$ (trois(8-hydroxyquinolino)aluminum), Bebq$_2$들의 Uv/Vis. 홉광도와 PL 스펙 트럼과 같은 광학적 특성을 조사하였으며 또한 이러한 물질들을 이용하여 다양한 종류의 유기 전기 발광 소자를 제작하고 제작된 소자들의 전류밀도-전압-조도 등의 전기 . 광학적 특성을 조사하였으며, 그 결과 다 음과 같은 결곤을 얻을 수 있었다. 다양한 ligand를 갖는 Tb complex들의 경우에도 EL 스펙트럼의 파장대 (wavelength)는 546nm~548nm의 녹색 발광을 하는 것을 알 수 있었고, 제작된 소자 중에서 Tb(ACAC)$_3$(Phen) 을 발광충으로 하고, TPD, 그리고 Bebq$_2$를 각각 정공 수송층, 전자 수송 층으로 한 소자가 가장 낮은 구동 전압을 갖는다는 것을 확인하였으며 logJ-logV 특성에서도 모든 전계 구간에서 이러한 구조의 소자가 가장 높은 전류밀도를 나타냈으며 저 전계 구간에서 전류밀도 타이가 가장 컸다. 소자의 전류밀도와 휘도의 관계에 있어서는 제작된 네 종류의 소자 중 Tb(ACAC)3(Cl-Phen)를 발광층으로 하고 TPD, 그리고 Bebq2를 각각 정공 수송층, 전자 수송 층으로 한 소자가 가장 휘도가 우수한 것을 알 수 있었다. 또한 red (europium complex), green (terbium complex), 그리고 blue (TPD) 색깔을 나타내는 유기 재료를 사용하여 한 소자에서 백색 소자를 제작하여 cyclic voltametric방법을 이용하여 각 유기 물질들의 에너지 준위를 조사하여, 각각의 소자들을 에너지 밴드 다이어그램(energy band diagram)으로 자세히 설명하였다.

• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.214-220
• /
• 2013

Hydrophobic coating on a silicate-based yellow phosphor ($Sr_2SiO_4:Eu^{2+}$) was carried out by using hexamethyldisiloxane (HMDSO) precursor in an atmospheric pressure dielectric barrier discharge plasma reactor, eventually to improve the long-term stability and reliability of the phosphor. The phosphor powder samples were characterized by a scanning electron microscope (SEM), a transmission electron microscope (TEM), a fluorescence spectrophotometer and a contact angle analyzer. After the coating was prepared, the contact angle of the phosphor powder increased to $133.0^{\circ}$ for water and to $140.5^{\circ}$ for glycerol, indicating that a hydrophobic layer was formed on its surface. The phosphor coated with HMDSO exhibited photoluminescence enhancement up to 7.8%. The SEM and TEM images of the phosphor powder revealed that the plasma coating led to a morphological change from grain-like structure to smooth surface with 31~46 nm thick hydrophobic layer. The light emitting diode (3528 1 chip LED) fabricated with the coated phosphor showed a substantial enhancement in the reliability under a special test condition at $85^{\circ}C$ and 85% relative humidity for 1,000 h (85/85 testing). The plasma-mediated method proposed in this work may be applicable to the formation of 3-dimensional coating layer on irregular-shaped phosphor powder, thereby improving the reliability.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1189-1193
• /
• 2012

The Miniaturized Fingerprint Imager (MFI) is a slim optical mouse that can be used as an input device for application to wireless portable personnel communication devices such as smartphones. In this study, we have fabricated key optical components of an MFI, including the illumination optical components and imaging lens. An LED beam-shaping lens consisting of an aspheric lens and a Fresnel facet was successfully machined using a diamond turning machine (DTM). A customized V-shaped groove for beam path banding was fabricated by the bulk micromachining of silicon that was coated with aluminum using the shadow effect in thermal evaporation. The imaging lens and arrayed multilevel Fresnel lenses were fabricated by electron beam lithography and FAB etching, respectively. The proposed optical components are extremely compact and have high optical efficiency; therefore, they are applicable to ultraslim optical systems.

• Korean Journal of Plant Resources
• /
• v.37 no.2
• /
• pp.203-213
• /
• 2024

In this study, we investigated the growth and physiological responses of Iris laevigata Fisch. to shading treatments in order to suggest optimal light conditions for ex-situ conservation of the northern lineage plants. For this purpose, a control plant receiving full sunlight and different shading treatments (50%, 75%, 95%) were installed, and leaf mass per area, chlorophyll content and fluorescence response, and photosynthetic characteristics were investigated. I. laevigata developed leaves with higher photosynthetic efficiency to adapt to lower light intensity as shading levels increased. Chlorophyll content increased with increasing shading levels, and leaf mass per area decreased with increasing leaf area. The chlorophyll fluorescence responses Fv/Fm and NPQ did not change with shading, and the activity of the carbon fixation system did not differ between treatments. I. laevigata exhibited a light-saturation point equivalent to that of sun plants and maintained photosynthetic capacity similar to that of controls up to 75% shading. The apparent quantum yield of I. laevigata decreased significantly at 95% shading, indicating adaptation to lower light conditions. It seems that the photosynthetic capacity of I. laevigata decreases when grown under 95% shading level compared to full sunlight, and it is judged that the longer the light is restricted by continuous shading, the more unfavorable the growth will be.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.1
• /
• pp.28-37
• /
• 2017

Mineral trioxide aggregate have been used for many years as a pulp therapy material. The most widely used product, Proroot white $MTA^{(R)}$ has a major drawback that it causes tooth discoloration. This study assessed discoloration of crown when various MTA-based materials were placed in the coronal aspect of the root canal. Seventy-five single-rooted, unrestored premolar teeth were selected. The teeth were randomly assigned to four experimental groups, each of $Biodentine^{(R)}$, Proroot $wMTA^{(R)}$, $Endocem^{(R)}$, $RetroMTA^{(R)}$ and one negative control groups. Color measurements were utilized by the Commission International de I'Eclairage's L*a*b* system with spectrophotometer. The color was assessed eight times : initial, 1 day, 1 week, 2 weeks, 4 weeks, 8 weeks, 12 weeks, and 16 weeks after the placement. Statistical analysis was performed using the 2-way repeated analysis of variance and Bonferroni's method with p < 0.05. Proroot $wMTA^{(R)}$ induced significant decreases in $L^*$ values during experiment period. Tooth samples from the $Endocem^{(R)}$ group presented indistinct grayish color changes. The $Biodentine^{(R)}$ and $RetroMTA^{(R)}$ showed color stability. Consequently, while Proroot $wMTA^{(R)}$ and $Endocem^{(R)}$ that contain bismuth oxide as a radiopacifier showed tooth discoloration, displayed no sign of discoloration $Biodentine^{(R)}$ and $RetroMTA^{(R)}$ that contain zirconium oxide as a radiopacifier.

• Journal of environmental and Sanitary engineering
• /
• v.3 no.2 s.5
• /
• pp.61-78
• /
• 1988

This study was carried out to clarify the effect of dietary calcium, casein and suet on intestinal absorption of cadmium in mice. It was performed for 30 days, from April 11, to May 10, 1988. Ninety mice were devided into 4 experimental groups and control group with 6 mice each dietary group, and measured survival ratio, body weight and weight ratio of organ to body. The contents of cadmium in liver, kidney, spleen, muscle and skin with hair, and feces were analyzed by atomic absorption spectrophotometer after sacrifice by anesthesia. The ratio of survival after 30 day breeding was $100\%$ in control group, but $66.7\%$ in group IV(basal diet + Cd + Ca) with $100{\mu}g$ one dose and with 50ppm cadmium containing fluid free-intake, and group V (basal diet + Cd + suet) with free-intake of 50ppm containing cadmium fluid. The ratio of body weight gains in cases of single dose $100{\mu}g$ of cadmium was highest as $42.3\%$ in group IV and lowest as $26.0\%$ in group V, in cases of free-intake of 50ppm containing cadmium fluid was highest as $24.0\%$ in group IV and lowest as $11.6\%$ in group II (basal diet + Cd). The body weight, in the case of single dose of $100{\mu}g$ of cadmium showed no increase untill 5th day from acute poisoning. While in case of free-intake of 50ppm containing cadmium, it showed very slight increase through all breeding period. The weight ratio of organ to body were lowest in liver of group II in both occasions. The most of cadmium administered was excreated in feces within 2 days after single dose $100{\mu}g$ cadmium. The contents of cadmium in all tissues were significantly high in each group comparing to control group as liver, kidney, spleen and muscle of group II which showed the highest level in both occasions of $100{\mu}g$ one dose and free-intake of 50ppm containing cadmium fluid, and higher in group II of the occasion with $100{\mu}g$ single dose, and in group V of the occasion of 50ppm containing cadmium fluid free-inatke for skin with hair. And the content of cadmium in tissues is generally higher in the occasion of 50ppm containing cadmium free-intake than $100{\mu}g$ single dose. From the above results I conclude that the addition of casein, calcium and suet in cadmium containing diet is effective to inhibtion of intestinal absorption of cadmium by particularly, calcium.

• Journal of the Korean earth science society
• /
• v.36 no.7
• /
• pp.661-673
• /
• 2015

UBVI CCD photometry of the intermediate age open cluster NGC 7790 has been obtained using AZT-22 1.5 m telescope (f/7.74) at the Maidanak Astronomical Observatory in Uzbekistan. NGC 7790 contains three ${\delta}$ Cep variable stars including CEa Cas, CEb Cas, and CF Cas. PSF photometry was carried out using IRAF/DAOPHOT for all observations. The total number of stars observed both in V and I filter was 1008 and the limiting magnitude was $V{\approx}22$. To determine atmospheric extinction coefficients and photometric zero points, many blue and red standard stars as well as the standard stars in the celestial equator under various airmass were observed. Photometric data were transformed into the standard Johnson-Cousins' UBVI standard system. From the analysis of UBVI color-magnitude diagram and color-color diagram, the color excess in V and I filter [$E(B-V)=0.58{\pm}0.02$], the selective extinction ratio in V and I filter [$R_V{\equiv}A_V/E(B-V)=3.02{\pm}0.09$] and distance modulus ($V_0-M_V=12.65{\pm}0.10$) of the cluster were determined. The age of the cluster was estimated to be log $age=8.05{\pm}0.05$ [yr] based on the position of these three Cepheid variables in the color-magnitude diagram, the isochrone of the Geneva group ($Ekstr{\ddot{o}}m$ et al., 2012-Z=0.019), and the isochrone of the Padova group (Bressan et al., 2012-Z=0.014) were used to compare each other. Of them, the Geneva models that considered stellar rotation well described the position of ${\delta}$ Cepheid variables in the blue loop. Although they were well consistent with standard period-luminosity relation of ${\delta}$ Cepheid variables, three Cepheid variables in NGC 7790 were, on average, brighter by about 0.5 mag than the absolute magnitude estimated from the mean period-luminosity relation at a given period.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.3
• /
• pp.464-471
• /
• 2002

Author applied several engineering methodologies to classical ultrasonic nebulizer to cope with it's demerits. After several trials and errors, we got the several meaningful results. To evaluate the modified ultrasonic nebulizer for inhalation toxicology of cadmium, author used light-scattering photometer. This paper is the one part of inhalation exposure systems for inhalation toxicology study of cadmium. According to the testing conditions, source temperature 50℃ and inlet-duct band temperature 150℃, aerosol generation results for sodium chloride and cadmium chloride were as followings: Coefficients of variation(CV) of sodium chloride and cadmium chloride for repeated trials were 3.38 and 4.77 for 10g, 2.47 and 5.02 for 5g, and 4.70 and 2.98 for 2.5g. All the CVs were within 10% of acceptance variability. Count Per Minute(CPM) changes of NaCl and CdCl₂ for 5 repeated trials were similar. CPM ratios of CdCl₂/NaCl were 1.13 for 10g, 0.76 for 5g, and 1.06 for 2.5g. Relative aerosol generation of cadmium chloride to sodium chloride was the highest in 10g. Efficiency increases of 24.50% for 5g NaCl, 14.91 % for 2.5g NaCl, and 16.48% for 2.5g CdCl₂ with respect to theoretical efficiency were observed but 0.04% efficiency decrease was observed in 5g CdC₂. According to the modifications of source temperature(20, 50, 70℃) and inlet-duct band temperature(20, 50, 100, 150, 200℃), aerosol generation results for NaCl and CdCl₂ were as followings: CPM trends for each quantity excepting 10g NaCl in inlet-duct band temperature 200℃ were similar, and the highest CPM was observed in source temperature 70℃ to each inlet-duct band temperature. The highest CPMs to 10, 5, and 2.5g NaCl were observed in source temperature 70℃ and inlet-duct band temperature 20℃. Aerosol generation of cadmium chloride was increased with the higher source temperature, excepting inlet-duct band temperature 200℃. The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this trend was similar to NaCl aerosol generation The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this result was similar to NaCl aerosol generation. Observed efficiencies of 5 and 2.5g NaCl were similar to ifs theoretical efficiency but -3.08% efficiency decrease of 5g CdCl₂, 17.47% efficiency increase of 2.5g CdCl₂ were observed. CPM ratio of CdCl₂/NaCl of 10g was different to 5 and 2.5g, and 2.5g ratio was higher than 5g ratio. In conclusion, to get maximum aerosol generation for NaCl and CdCl₂ will be the conditions that set the appropriate inlet-duct band temperature for each materials and increase the source temperature. Sodium chloride can be used to evaluate the performance and predict the concentration for cadmium aerosol in aerosol generator and inhalation exposure system.