• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.974-978
• /
• 2003

The down-converter of the WCDMA Digital Optic Repeater is developed. Based on the system specifications, the structure of the down-converter is accomplished and its block diagram is drawn. The down-converter is implemented according to these block diagrams. Subsequently a low pass filter, an automatic level controlled attenuator, a frequency synthesizer and other components for the down-converter are designed and implemented, and a main board to integrate these modules is also manufactured. To reduce the noise floor of system and suppress the RF spurious noise, a PCB layout is performed carefully. For each module consisting of the down-converter and the entire system, the performance tests are accomplished to check the performance about the specifications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1240-1245
• /
• 2011

In this paper, channel modeling and analysis of wireless visible light communication(VLC) were studied in indoor circumstance. Photons emitted from LED straightly moved and navigated within indoor, after that a part of photons reached on PD via LOS(Line Of Sight) or NLOS(None Line Of Sight). These received signals had characteristics of delay profile and attenuation, which was multiple-path fading. In this paper, computer simulation of VLC channel was executed under the condition that two LEDs were used for transmitter and three PDs were located at different positions of the 20*8*2.3m sized indoor. BER performance simulation was excuted based on the characteristics of each VLC channel.

• Korean Journal of Optics and Photonics
• /
• v.29 no.2
• /
• pp.77-84
• /
• 2018

We analyze the link availability of terrestrial free-space optical (FSO) communication systems in Korea. For this purpose, we utilize several theoretical models to calculate the power losses induced by absorption and scattering in the atmospheric channel, using five-year meteorological data for three major cities in Korea (Seoul, Busan, and Daejeon). Also, we estimate the power variations at the receiver caused by scintillation in the data. Those power losses and variations are used to estimate the availability of FSO links in the three cities. The results show that link availability is estimated to be over 95% in Daejeon for a 3.5-km FSO link, when the transmitter power and receiver diameter are greater than 10 dBm and 7 cm respectively. Slightly worse link availabilities are obtained for Busan and Seoul.

• Journal of Biomedical Engineering Research
• /
• v.23 no.4
• /
• pp.263-268
• /
• 2002

The image quality of imageguide depends on the structure, material, length of microfibers and the phenomena such as cross-talk and leaky ray between adjacent fibers. These Parameters should be considered as important factors in the image transmission qualify of fibers. However it is considered to be very difficult to assess all the parameters in a consistent way Therefore. two image characteristics, image resolution and image brightness are measured and analyzed to determine the image quality of imageguide. But the exact methods to measure two image characteristics of imageguide are not reported. In this study, the image brightness of imageguide for ultrathin endoscope is determined by measuring of the numerical aperture. the packing fraction and the attenuated power ratio of imageguide. Especially it is possible to obtain more exact results from measuring the numerical aperture of whole image guide than those from theoretical calculation of the single microfiber in an image guide. The image brightness of the image guide which has $3.1\mu m$ microfibers is about 37% less than that with $4.1\mu m$ microfibers.

• 한국연소학회:학술대회논문집
• /
• 1997.06a
• /
• pp.45-50
• /
• 1997

An experimental study on LII signal images from soot particles in a flame has been carried out in order to investigate the effect of the incident laser characteristics. By changing the wavelength of the incident laser beam, the LII signal was saturated at smaller laser power with 532 nm than 1,064 nm. This implies that the larger absorption coefficient of soot particles at 532 nm would influence the LII signal characteristic. Using the deconvolution technique, the projected LII line images were coverted to reconstruct the local LII signals inside the beam. The results show that the LII images at ICCD camera result from the integration of LII signal across the laser beam.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.321-324
• /
• 2004

In this paper, attenuation characteristics of silica-based variable optical attenuator (VOA) with heat insulating structures are investigated by variations of structural parameters and heating power at wavelength 1.55${\mu}m$. The characteristics of power dissipation and attenuation at this VOA was optimized in terms of heating insulating width, under-cladding height and over-cladding height. The optimized maximum attenuation of this VOA was achieved about 31dB at heating power 150mW.

• Electronics and Telecommunications Trends
• /
• v.25 no.4
• /
• pp.93-102
• /
• 2010

최근 테라헤르츠 대역의 주파수를 이용하여 데이터 전송속도 10Gbps 이상의 초고속 통신 시스템에 대한 관심이 높아지고 있다. 테라헤르츠 대역의 주파수 범위는 100GHz~10THz로서 종래의 밀리미터파 대역에서 사용하고 있는 대역폭에 비하여 월등히 넓은 주파수 대역폭을 제공하여 주기 때문에 미래의 초고속 통신시스템 응용에 무한한 잠재적 가치를 가지고 있다. 테라헤르츠 전파는 전자파와 광파의 특성을 모두 가지고 있어 공간으로 전파하며 광의 특성에 따라 광학 렌즈를 이용하여 방사 빔을 집속할 수 있다. 또한 테라헤르츠파는 전파 감쇠가 대단히 커서 현재의 기술수준을 고려해 볼 때 10m 정도의 단거리 통신에 적합하다. 미국, 유럽, 일본 등 테라헤르츠 선도국에서는 핵심 부품 및 MMIC 등의 연구 개발에 많은 투자를 하고 있다. 본 고에서는 테라헤르츠 통신을 위한 집적화 RF 송수신기 기술개발 동향에 대하여 소개하고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.356-356
• /
• 2012

InGaN/GaN로 제작된 Blue chip의 파장에 따른 백색 LED의 성능 저하를 전기적, 광학적 특성을 고려하여 조사하였다. 4가지 파장으로 제작된 백색 LED Sample들은 60 mA, 75 mA, 90 mA의 주입 전류로 장 시간동안 스트레스를 주었다. 또한 형광체가 없는 상태와 있는 상태를 구분하여 패키지의 감쇠 특성을 확인하였다. Blue 피크 파장 437 nm, 주입전류 90 mA, 형광체가 있는 상태와 형광체가 없는 상태에서 패키지의 출력 광세기는 각각 20%, 36%까지 감소하였다. 이는 Blue Chip에서 출력되는 단파장이 페키지 몰드의 노화(황변)현상에 직접적인 영향을 주기 때문이다. 전기적 특성은 Blue chip의 파장영역에 의존하지 않고, 스트레스 시간에 따른 LED내부 저항이 커지는 현상을 확인하였다. 따라서 InGaN/GaN로 제작된 백색 LED의 장 수명을 얻기 위해서는 Blue chip의 출력 파장 영역과 페키지 몰드 재료 특성의 신뢰성 관계가 중요하다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.4
• /
• pp.448-452
• /
• 2004

The micromachined variable optical attenuator(VOA) was presented in the paper. The VOA has two single mode fiber(SMF) aligned with free space and symmetric parallel plate actuator with microshutter, which can control a amount of light by driving the actuator. In the paper, analysis on driving performances of the VOA was performed and can be reduced threshold voltage through the decreasing displacement actuating range. This paper presents a VOA that is fabricated using bosch deep silicon etching process with silicon on insulator(SOD wafer. The VOA consists of driving electrode, ground electrode, actuating microshutter, and mechanical stopper. In this VOA, actuating shutter is driven by electrostatic force and the threshold voltage is close to 28V, 46V come along with the spring width of 5${\mu}{\textrm}{m}$, 7${\mu}{\textrm}{m}$ respectively. Attenuation range is measured from 2.4㏈ to 16.7㏈.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.48-49
• /
• 2003

원자가 전자기파와 상호작용할 때 원자 전이의 결맞음 여기 (coherent excitation of atomic transitions)는 일반적인 현상이다. 이 상호작용은 라비 진동 (Rabi oscillation), 자유 유도 감쇠 (free induction decay), 단열 밀도 이송 (adiabatic population transfer), 결맞음 과도 (coherent transients； CT) 등 다양한 결과를 가져온다. 특히, 전자기파의 주파수가 원자의 공진주파수를 중심으로 스윕될 때 결맞음 과도 현상 (coherent transient phenomenon)은 밀도 반전 (population reversal)을 유도하기도 한다. (중략)