• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1358-1362
• /
• 2007

자연하천에서 합류부 흐름 및 하상변동 특성이 매우 복잡하기 때문에 하천 복원 사업을 수행하면서 합류부에서 이에 대한 분석이 간과되고 있다. 특히 합류부 주변에 설치된 교량이 흐름에 미치는 영향에 대해 연구가 매우 부족한 실정이다. 본 연구에서는 실제 교각의 배치, 형상 및 제원이 고려된 격자망을 이용하여 합류부 주변에 위치한 교량에 의한 흐름 특성을 분석하였다. 연구 대상 구간은 대전광역시를 관통하여 흐르는 갑천과 지류인 유등천이 합류하는 지점으로서, 빈도별 홍수량(200년 빈도)에 대하여 흐름특성을 분석하였다. 유등천은 합류점 상류부에서 갑천 고속화도로를 위한 교량이 건설되기 전보다 설치 후에 유속 분포 변화가 크게 나타나며, 특히 우안 고수부지 지역에서 유속 감소가 뚜렷하게 나타났다. 또한 교각 설치 후 수심 분포는 배수영향으로 증가하지만 증가량은 0.2m 미만으로 크지 않았다. 합류 후 단면에서는 수심 분포가 교량 설치 전후 전체적으로 일치하는 형태를 나타내고 있지만, 유속은 좌안에서 우안으로 갈수록 교량 설치 전 유속이 설치 후 유속보다 크게 나타나는 현상이 나타나고 있다. 교량 설치 후 좌안에 단위 폭당 유량과 유속이 증가하고, 우안에서는 유속이 감소하며 홍수량이 증가할수록 그 특징은 뚜렷하게 나타나고 있다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.11 no.1
• /
• pp.39-48
• /
• 1978

1) The decrease in strength of Raschel twines at Raschel joints is regarded to be due mainly to the frictional force between yarns and the unbalanced tensile distribution by the deformation of the joints. The rate of the decrease is about $13\%$ in lengthwise pull and 22 to $26\%$ in breadthwise pull. 2) The 3-course joint is less in deformation and stronger than the 2-course joint in all cases of pulls. 3) The variation of Raschel joint strength $T_R$ with the angle $\varphi$ between the adjacent bars is expressed as $T_R=T_{R0}-k\varphi$ where $T_{R0}$ is the strength at $\varphi=0^{\circ}$ and K is a constant. 4) The tensile strength ${\sigma}R$ and tile breaking energy $E_R$ of Raschel netting are given by $${\sigma}R=KN\;or\;${\sigma}R=T_RN$$ and $$E_R=AN$$ respectively, where N is the number of meshes at the pulling side, and K and A are constants. But the breaking energy of the netting is almost constant independent of tile variation of N. 5) The Raschel netting with some bars cut already breaks from tile joints of the bars next to the cut bars and its tensile strength, breaking energy, and breaking elongation decrease largily even if only one bar is in already cut state. 6) The tearing strength of Raschel netting is almost equal to the tensile strength of its single joint pulled by two bars. 7) The twisted joint is much more excellent in strength than the knot or the Raschel joint. The knot strength is 69 to $76\%$, and the Raschel joint strength is 71 to $74\%$ in lengthwise pull and 62 to $67\%$ in breadthwise pull, respectively, of the twisted joint strength.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.302-309
• /
• 2009

We fabricated a Si nano floating gate memory with Schottky barrier tunneling transistor structure. The device was consisted of Schottky barriers of Er-silicide at source/drain and Si nanoclusters in the gate stack formed by LPCVD-digital gas feeding method. Transistor operations due to the Schottky barrier tunneling were observed under small gate bias < 2V. The nonvolatile memory properties were investigated by measuring the threshold voltage shift along the gate bias voltage and time. We obtained the 10/50 mseconds for write/erase times and the memory window of $\sim5V$ under ${\pm}20\;V$ write/erase voltages. However, the memory window decreased to 0.4V after 104seconds, which was attributed to the Er-related defects in the tunneling oxide layer. Good write/erase endurance was maintained until $10^3$ write/erase times. However, the threshold voltages moved upward, and the memory window became small after more write/erase operations. Defects in the LPCVD control oxide were discussed for the endurance results. The experimental results point to the possibility of a Si nano floating gate memory with Schottky barrier tunneling transistor structure for Si nanoscale nonvolatile memory device.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.1
• /
• pp.65-72
• /
• 2010

In this study, the effects of urban areas against flood waves due to a dam failure were numerically investigated based on the two laboratory experiments and the predicted water surface elevations at specific points showed good agreement with available measurements. In the first experiment, a relatively high water depth and the delay effect of flow at the front of urban areas are observed. The urban areas may become a large obstacle against smooth propagation of flood wave. In the second one, as the inflow increases, moreover, the water surface elevations can be classified into abruptly decreasing portion and slowly decreasing portion, and the first arrival time to the front of urban area is decreasing with the increasing inflow.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2020

Biogenic opal crash at about 6.7 Ma was identified at both IODP Site U1447 and NGHP Site 17 in the Andaman Sea. The different biogenic opal content and general variation pattern between two sites may be attributed to the different concentration of analytical reagent and sedimentation rate estimated by the different chronological approaches. Nevertheless, this study suggests that the biogenic opal crash in the Andaman Sea is closely related to the restriction of Indonesian Throughflow and to the decreasing strength of Indian summer monsoon during the late Miocene, both of which resulted in the reduction of nutrient supply.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.6
• /
• pp.485-493
• /
• 2015

Planing hull form is widely used as a high speed vessel hull. There is a problem of the planing hull not solved yet. The problem is that the planing hull has very large vertical acceleration and large heave and pitch motions. As one method for overcoming this problem, there is "wave-piercing hull". Before the motion in waves is investigated, the resistance and running attitude must be investigated. In this paper, the running attitude and resistance of two wave-piercing hulls are investigated by model tests. Model test results show that the wave-piercing hulls have large trim angle and sinkage at the high speed, so additional model tests are conducted by using the hull appended by stern interceptor that is very thin plate to increase the hydrodynamic pressure at the attached location. The results are compared with other planing hulls and the resistance components and the hydrodynamic force are discussed. From the model test results, it can be known that the stern interceptor is the effective appendage for the reduction of the resistance and trim angle of wave-piercing hull.

• Journal of Biomedical Engineering Research
• /
• v.23 no.4
• /
• pp.323-327
• /
• 2002

Chronic diabetic patients need to sample capillary blood for monitoring and controlling the blood sugar level. Frequent sampling requires to minimize pain during skin puncture. The present study developed mechanisms to minimize pain with effective sampling procedure. which consisted of tapered spring, guiding tunnel, and 30G needle Penetration depth was limited to within 2mm for pain reduction as well as for safety. Simple no-reuse mechanism also prevented the cross-patient and secondary infection possibility. Clinical experiments demonstrated the best convenience and safety with minimal pain in the diabetes, normal, and nursing students groups. Sing1e blood sampling was enough for successful blood sugar test by portable analyzer. The present sing1e use auto-lancet should be of great convenience in frequent capillary blood sampling for the diabetes.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.3
• /
• pp.262-272
• /
• 2005

This study was undertaken to obtain design concentrations for the natural system treating stream water flowing into estuarine lake(Sapgyo). This lake has three major, so called, national-class streams: one is Gokgyo flowing through two medium-size municipal areas and the others are Muhan and Sapgyo placed in mostly rural area nested with some small towns. The results of three year's investigation showed big changes in water quality during the period between dry and wet seasons. Nitrogen concentration usually decreases as the flow rate increases. The change of phosphorus concentration in Gokgyo was the same pattern as nitrogen, but in other two streams it was inversely related with flow rates. This is probably due to the chemical property of the particles washed out from the different stream basins during wet season. It was found that about 40 to 60% of the total nitrogen are in soluble form and on average, 35% of the total phosphorus consists of dissolved-P. Representative concentration of these streams has to be separately determined based on dry and wet season. TDS and SS could be indicating parameters useful to depict and characterize a change of water quality with respect to flow rate because their measurement is easy and also includes a small analytical error. TDS values measured during dry season are related with high nitrogen concentration while during wet season, SS values effectively reflect a high concentration of phosphorus. For design purpose, cumulative concentration distribution graph presented in this paper can be directly or indirectly applied to other streams through a brief comparative and verificative study.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.3
• /
• pp.69-75
• /
• 2016

This study investigated the effect of heat treatment conditions not only on the Cr surface crack propagation behaviors but also on the Ni/Cr interfacial reaction characteristics in electroless Ni/electroplated Cr double coating layers on Cu substrate. Clear band layer of Ni-Cr solid solutions were developed at Ni/Cr interface after heat treatment at $750^{\circ}C$ for 6 h. Channeling cracks formed in Cr layer after 1 step heat treatment, that is, heat treatment after Ni/Cr plating, while little channeling cracks formed after 2 step heat treatment, that is, same heat treatments after Ni and Cr plating, respectively, due to residual stress relaxation due to crystallization of Ni layer before Cr plating.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.78-83
• /
• 1998

Alloy 600과 Alloy 690의 응력부식파괴(Stress corrosion cracking, SCC)에 미치는 TiO$_2$의 영향을 315$^{\circ}C$의 10%NaOH 수용액에서 RUB(reverse U-bend) 시편, C-Ring 시편과 CT(compact tension)시편을 사용하여 평가하였다. 시편은 alloy 600 MA(mill anneal), alloy 600 TT(thermal treatment) 그리고 alloy 690 TT로 제작하였다. SCC 시험은 탈산된 10%NaOH 수용액에 2 g/1 TiO$_2$를 첨가한 용액과 첨가하지 않은 용액에서 수행하였으며, 이 조건에서 분극곡선도 얻었다. SCC 시험시 시편을 부식전위로부터 +150 ㎷ 양극분극을 가하였다. 기준전극으로 external Ag/AgCl electrode를 사용하였다. Alloy 600 MA로 제작한 RUB 시편은 TiO$_2$가 없는 용액에서 5일 안에 벽 관통 균열을 보였으나 TiO$_2$가 첨가된 용액에서는 균열을 관찰할 수 없었다. TiO$_2$가 첨가됨에 따라 alloy 600과 alloy 690의 임계전류밀도는 크게 감소하였고 또한 부동태 전류밀도도 감소하였다. 부동테 영역에서 TiO$_2$가 있는 용액의 경우 여러 peak가 있는 반면에 TiO$_2$가 없는 용액은 peak가 뚜렷하지 않았다. 이런 결과는 TiO$_2$가 첨가점에 따라 active region에서도 안정한 부동태 피막이 존재한다는 것을 시사한다. 또한 TiO$_2$가 없는 경우 SCC가 잘 일어나는 영역에 존재하는 부동태 피막이 TiO$_2$ 첨가에 따라 repassivation kinetics 등의 성질이 변화한 것으로 판단된다.