• Journal of the Korean Electrochemical Society
• /
• v.27 no.2
• /
• pp.55-72
• /
• 2024

Secondary batteries are used as an essential renewable energy source in our lives, such as electric vehicles and energy storage systems (ESS), as an alternative to fossil fuels due to global warming. However, cases of battery fires and explosions have been reported due to thermal runaway in secondary batteries due to various causes such as overdischarge, high-speed charging and discharging, and external short circuit, and great efforts are being made to find solutions suitable for each cause. In particular, as cases presumed to be caused by the overcharging process have been reported, this review will examine the chemical reactions of secondary batteries that can occur during the overcharging process and discuss risk investigation methods to check and prevent them.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.273-274
• /
• 2016

본 논문에서는 LLC 공진형 컨버터 기반 리튬 이온 배터리 충전기의 통합형 보상기를 제안하였다. 제안한 보상기는 실효 커패시턴스의 변화를 고려할 수 있는 배터리 모델 기반으로 설계되어 전 충전 구간 동안 안정적인 동작이 가능하며 정전류-정전압 (CC-CV) 충전을 하나의 보상기로 구현하여 충전 모드 변환시의 과도 특성을 가지지 않는다. 제안한 통합형 보상기의 설계는 기본파 근사법과 확장기술함수를 활용하여 진행 하였으며, LLC 공진형 컨버터와 배터리팩을 이용한 실험결과를 통하여 그 유효성을 검증 하였다.

• The Korean Journal of Rheology
• /
• v.4 no.2
• /
• pp.116-126
• /
• 1992

본 연구에서는 형내압 파형제어 시스템, 초고속, 사출성형, 그리고 금형진공 시스템 등을 갖춘 사출 성형기를 이용하여 정밀 구면렌즈를 성형하기 위한 실험을 수행하였다. 이 러한 목적을 위해 성형공정 변수인 사출시간 충전압력 그리고 보압시간이 성형품에 미치는 영향을 중량과 곡률반경 구면 정밀도 그리고 구면오차의 간접무늬를 측정하여 연구하였다. 그결과로서 성형품의 중량(칫수)과 곡률반경에 지대한 영향력을 행사하는 변수는 충전압력 이며 사출시간과 보압시간은 곡률반경과는 무관해 보이고 중량의 증가에는 기여하지만 공정 사이클 시간을 증가시키는 문제가 지적된다. 구면정밀도 측정실험 결과 길지도 짧지도 않는 15∼20초 사이의 보압시간 4초이내의 빠른 사출시간 그리고 860kg/cm2 이상의 높은 충전압 력에서 우수한 결과를 보여주었다, 마지막으로 구면의 형상에 대한 간접무늬 측정결과는 성 형공정을 이해하는데 강력한 도구가 됨을 발견하였다.

• The Korean Journal of Rheology
• /
• v.9 no.1
• /
• pp.16-26
• /
• 1997

사출 성형된 제품에서 발생하는 잔류응력은 최종 제춤의 기하학적 정밀도와 기계적 성질 및 열적 성질에 영향을 미친다. 사출성형된 제품의 잔류응력을 예측하기 위해서는 먼 저 열 및 유동장의 해석을 수행하여야 하고이를 위해서는 사출 성형의 세단계. 즉 충전, 보 압, 냉각을 모두고려해야한다. 검사체적 방법에 기초한 혼합 유한요소/유한차분방법을 사용 하는 수치 해석적 기법에 의하여 충전과정가 후충전 과정의 유동장 해서을 수행하였다. 일 반화된 헬레쇼 유동을 가정하였고 보압과 냉각과정시의 고본자의 압축성을 고려하였다. 점 도의 전단 변형률의 크기와 온도에 대한 의존성은 개선된 크로스 모델을 사용하여 나타내었 다. Tait에 의해 제안된 상태방정식은 고분자의 온도, 압력, 부피의 상호관계를 묘사하는 좋 은 방법을 제공하였다. 유동해석을 통하여 전 공정에 걸쳐서 온도와 압\ulcorner장의 변화에 대한 데이터를 얻었고 제품의 고체 응력해석의 입력 데이터로 사용하였다. 유한요소응력해석에는 평면 응력요소를 사용하였다. 다양한 형태의 금형에 대해서 공정 변수들을 달리하여 유동장 의 해석과 잔류응력의 계산을 수행하였다. 이로부터 공정조건과 유동장의 관계를 밝히고 최 종 제춤의 잔류 응력에의 영향을 고찰하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.32-32
• /
• 1998

고체 로켓 모타 추진제 그레인은 크게 단면 연소형 그레인(end-burning grain)과 내면 연소성 그레인(perforated grain)으로 분류할 수 있다. 단면 연소형 그레인은 부피충전율이 크고 구조적 안전성이 우수한 장점이 있으나 연소면적이 작은 단점이 있고, 내면 연소형 그레인은 연소면적이 큰 장점이 있으나 부피 충전율이 작은 단점이 있다. 따라서 단면 연소형 그레인의 장점인 높은 충전율을 유지하면서 연소면적을 증대시키는 효율적인 방법으로 열전도율이 높은 금속선을 단면 연소 그레인에 삽입시키는 방법이 있다. 높은 열전도율로 인하여 금속선을 따라 연소속도가 빨라져 연소면적이 증가하게 되는데, 금속선이 없을 때의 연소속도와의 비를 연소속도 증가 비라 한다. 이는 추진제 종류, 금속선 재질, 굵기 등에 따라 달라지고, 실험실에서 strand burner test로 구할 수 있다.

• Tunnel and Underground Space
• /
• v.29 no.6
• /
• pp.407-424
• /
• 2019

To prevent possible accidents by surface subsidence, backfilling operation is known to be one of the most effective methods for ensuring the long-term ground stability because it can eliminate fundamentally the origin of underground mine opening collapse. Also, for effective backfilling of underground mine opening, it is necessary to keep monitoring of backfilled mine opening for analyzing several factors such as filling effect with change of backfill material and characteristics of backfill material. Therefore, in this study, a monitoring system which consists of measuring device and software program has developed to examine the performance of backfilling operation and verify to field applicability to underground mine. Sensors for measuring device have been selected through study of recent research papers and mock-up test has been performed to verify the system compliance. Also, monitoring result of the mock-up test compared to case studies in some countries. From monitoring result fo the mock-up test compared to case studies in some countries, consequently, it was concluded that the developed real-time monitoring system had ensured filed applicability in the underground mine.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1795-1801
• /
• 2009

In this study, a portable flashlight which can manually generate the electricity by using sunlight was developed so that it can be used in the extreme environmental condition such as no-electricity condition. Battery is charged by using solar battery during the day, but when sunlight is not avalible during the night or rainy day, a handle is rotated to generate the electricity in order to charge the battery manually. To improve the brightness of the light, light is concentrated by using the optical lens. Low electric consumption circuit is used for the longer operating time by suppress electrical consumption while lamp is discharged. A circuit is designed and used for steady electrical curris dand voltage to insure steady battery charging. Super-discharge circuit and protection circuit are used for the super discharge of battery when it is not used for a long time. Also the constant charge is possible by using houseware adapter. As a result, a portable flashlight is designed to charge with sunlight during day, and with houseware adapter during night. A portable flashlight is also designed to irradiate longer distances by improvement of the brightness of the light using the optical lens. Thus, it forms white natural ray of light making possible for night reading.

• Restorative Dentistry and Endodontics
• /
• v.34 no.3
• /
• pp.208-214
• /
• 2009

The purpose of this study was to compare the dye leakage of MTA (mineral trioxide aggregate) apical plug produced by two orthograde placement techniques (hand condensation technique and ultrasonically assisted hand condensation technique). To simulate straight canal, 60 transparent acrylic blocks with straight canal were fabricated. These transparent acrylic blocks were divided into 2 groups (Group C; hand condensation technique (HC) and Group U; ultrasonically assisted hand condensation technique (UAHC)) of 30 blocks with each MTA application method. Each group was divided into 2 subgroups (n=15) with different canal size of #70 (subgroup C70 and subgroup U70) and #120 (subgroup C120 and subgroup U120). After apical plug was created, a wet paper point was placed over the MTA plug and specimen was kept in a humid condition at room temperature to allow MTA to set. After 24 hours, remaining canal space was backfilled using Obtura II. All specimens were transferred to floral form socked by 0.2% rhodamine B solution and stored in 100% humidity at room temperature. After 48 hours, resin block specimens were washed and scanned using a scanner. The maximum length of micro leakage was measured from the scanned images of four surfaces of each resin block using Photoshop 6.0. Statistical analysis was performed with Mann-Whitney U test. Group U of UAHC had significantly lower leakage than Group C of HC in #70-size canal (subgroup U70) (p<0.05).

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.265-272
• /
• 2016

A SCALDO(Supercapacitor Assisted LDO) regulator is a newly studied regulator to improve the efficiency of a LDO regulator. Commonly a LDO regulator has very low efficiency and a SCALDO regulator can improve it considerably because this regulator can reuse meaninglessly wasted energy at the LDO regulator by a supercapacitor witch is attached between input and a LDO regulator. However this regulator has several challenges because it is a being studied regulator. One of them is an overvoltage issue. At initial operating of this regulator, a supercapacior is totally discharged and input is connected with a supercapacitor and a LDO regulator in series. Thus, input voltage is enabled to a LDO regulator and this input voltage is a significant value to a LDO regulator because commonly input voltage is bigger than twice output voltage. In this paper, to solve this overvoltage issue, we proposed a new SCALDO regulator that has a pre-charger for charging a supercapacitor before starting operation. And we found that a proposed SCALDO regulator can properly reduce overvoltage of a LDO regulator through experiments.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.35-40
• /
• 2023

In order to prevent an ammonia container from bursting under conditions such as overcharging and abnormal temperature rise, it is necessary to prepare accident prevention measures through analysis of the operating mechanism of the Thermally Activated Pressure Relief Devices (TPRD) attached to the container. In this study, stress analysis acting on the ammonia container under pressurized conditions, density change analysis according to temperature change, and correlation between container filling amount and temperature and pressure change were presented. In addition, the maximum filling amount of the ammonia container was calculated, and the temperature and pressure at the filling amount were calculated through the phase equilibrium diagram. Based on this, the appropriate melting point of the Thermally Activated Pressure Relief Devices was derived and verified through a melting temperature experiment. Based on the results of this study, conditions for preventing ammonia container rupture accidents were suggested.