• Title/Summary/Keyword: 공학 계열

Search Result 623, Processing Time 0.031 seconds

Satisfaction Analysis of On-board Training in Shipping Companies: Impacts on Company Improvement Plans (위탁승선실습 만족도 분석을 통한 개선 방안 연구)

  • Kim, Jin-Seon;Kim, Joo-Hye;Kim, Yul-Seong
    • Journal of Navigation and Port Research
    • /
    • v.45 no.1
    • /
    • pp.1-8
    • /
    • 2021
  • The purpose of this study was to explore the regulations and operational problems of on-board training, and to investigate and analyze the satisfaction level of consignment on-board training among students who completed their training at Korea Maritime & Ocean University. In terms of satisfaction differences by gender, female students generally had a higher relative satisfaction level than male students. The different types of satisfaction in the navigation and engineering categories, the overall practical effect and satisfaction level of the training records shows that the satisfaction level of the trainee is much lower than that of the trainee, so relevant educational institutions and shipping companies need to take measures to improve the satisfaction level of this part. The most important part of the comprehensive company evaluation completed by trainees asked whether they thought the training was equivalent in labor to the employees. Results suggest shipping companies must make a clear distinction between employees and trainees, while establishing relevant internal procedures so that the on-board training process can be carried out in accordance with the purpose of the on-board training consignment.

Characteristics of Low Temperature Desorption of Volatile Organic Compounds from Waste Activated Carbon in Cylindrical Cartridge (원통형 활성탄 카트리지 내 폐활성탄의 휘발성 유기화합물 저온 탈착 특성)

  • Kang, Sin-Wook;Lee, Seongwoo;Son, Doojeong;Han, Moonjo;Lee, Tae Ho;Hong, Sungoh
    • Clean Technology
    • /
    • v.27 no.1
    • /
    • pp.79-84
    • /
    • 2021
  • In this study, the waste activated carbon used in the painting process was filled into a cylindrical cartridge and the characteristics of desorption by low temperature gas were investigated. Adsorption and desorption experiments of toluene with activated carbon were conducted to determine the flow rate of desorption. In an experiment where desorption was performed while changing conditions at flow rates of 1, 2 and 4 ㎥ min-1, it was determined that 2 ㎥ min-1 was appropriate due to the high THC concentration and desorption time. In the early stage of the desorption of waste activated carbon, 2-butanone and MIBK (methyl isobutyl ketone) with a low boiling point were generated at a high rate in the gas component, and after that, the concentration of THC decreased and the BTX was desorbed at a high rate. The total calorific value of the gas component generated during the desorption of waste activated carbon was 316 kcal kg-1. From repeating the regeneration of waste activated carbon with toluene five times, it was observed that the iodine value and the specific surface area were relatively lower than that of new activated carbon. In the desorption experiment where two cylindrical cartridges were connected in series, the maximum THC concentration was about 470 ppm.

Study for Failure Examples Including with Gas filter Clogging of Emergency Cutting Valve, Assemblying Part Damage of Solenoid Valve, Contact Damage of LPG Switch Connector Fin in a LPG Car (LPG 자동차의 긴급차단밸브 기상필터막힘, 솔레노이드밸브 조립부손상, LPG 스위치 커넥터 핀 접촉불량에 관련된 고장사례 연구)

  • Lee, IL Kwon;Kook, Chang Ho;Ham, Sung Hoon;Kim, Jee Hyun;Kim, Sung Mo;Jung, Dong Hwa;You, Chang Bae;Moon, Hak Hoon;Lee, Jeong Ho
    • Journal of the Korean Institute of Gas
    • /
    • v.26 no.1
    • /
    • pp.1-6
    • /
    • 2022
  • This paper is a purpose to study and analyze the engine starting failure examples for LPG car. The first example, the researcher verified the phenomenon that didn't supply the fuel because of filter clogging by fine alien substance in the gas valve line when he inspected the emergency cutting valve. The second example, there was no the influence of gas leakage when the solenoid operated at first. But the damage part of solenoid assemblying face wad downed a durability according to running a valve. Eventually, the researcher checked on the phenomenon of engine stopping by no gas feeding in solenoid because of leaking of gas. The third example, the researcher sought that the wiring sheaths of connector fin between EGR 10A fuse and LPG switch verified the burn-out phenomenon due to the bad contacting as tension damage produced the overheating. Therefore, the manager of a car has to do pre-inspection no producing electric failure and he must maintain his car with optimum condition.

Predicting Unsaturated Soil Water Content Using CIELAB Color System-based Soil Color (CIELAB 색 표시계 기반 토색을 활용한 불포화토 함수비 예측 연구)

  • Baek, Sung-Ha;Park, Ka-Hyun;Jeon, Jun-Seo;Kwak, Tae-Young
    • Journal of the Korean Geotechnical Society
    • /
    • v.39 no.2
    • /
    • pp.31-42
    • /
    • 2023
  • A study was conducted to use soil color obtained from digital im ages as an indicator of soil water content. Digital images of Jumoonjin standard sand with five different water contents were captured under nine different lighting conditions. Through digital image processing, the soil color of the sample was obtained based on the CIELAB color system, and the effect of lighting conditions and water content on the soil color was analyzed. The results indicated that L* showed a high correlation with illuminance, whereas a* and b* showed a high correlation with color temperature. As the water content increased, L*, which represents the brightness of the soil color, decreased, and a* and b* increased. Therefore, the soil color changed from green and blue to red and yellow. Based on the regression analysis results of lighting conditions, water content, and soil color, a water content predicting method based on the soil color of silica-based sand photographed under irregular light conditions was proposed. The proposed method can predict the water content with a m axim um error of 0.29%.

Job Title Recommendations for Allied Health Professionals Related to Clinical Pathology, Laboratory Medicine, and Medical Biology (임상병리학, 검사의학, 의료생물학 관련 지원보건직 명칭에 대한 제안)

  • Bon-Kyeong KOO;Dajin LIM;Sangwon KIM;Chul KIM
    • Korean Journal of Clinical Laboratory Science
    • /
    • v.55 no.1
    • /
    • pp.1-8
    • /
    • 2023
  • The purpose of this study is to find terms that can give identity to the major and occupation of clinical laboratory technologist (also known as medical technologist). The term clinical pathology includes all branches of pathology, namely anatomical pathology, chemical pathology, hematology, microbiology, and all respective subspecialties. Unfortunately, several countries exclude anatomical pathology from the term clinical pathology, a problem that gets compounded when the title is translated into languages other than English. Clinical pathology (US, UK) is a medical specialty. Similar terms are laboratory medicine (Germany, Poland), medical/clinical biology (France, Netherlands) or clinical analysis (Spain). Depending on the person questioned, medical technology is defined slightly differently by individuals, companies, and institutions. The definition also depends on the language in which the question is asked. Medical technology can be translated to define clinical laboratory technology, allied health sciences, medical equipment, biomedical engineering, and health technology. The terms 'clinical pathology technology and pathological technology' are not used in allied health sciences. The names of 'medical technology·medical technologist' can be replaced by 'biomedical laboratory science·biomedical laboratory technologist' or 'clinical laboratory analysis·clinical laboratory analyst'. In this study, it is proposed to change the name of academic and occupation to 'medical biology·medical biology technologist' that combines the term biomedical.

The Effect of Follow-up Nutrition Intervention Programs Applied Aged Group of High Risk Undernutrition in Rural Area( I ) (영양위험 농촌노인집단에 적용한 영양중재 프로그램의 추후관리 효과( I ))

  • Park, Phil-Sook;Chun, Byung-Yeol;Jeong, Gu-Beom;Huh, Churl-Hyoi;Joo, Soon-Jae;Park, Mi-Yeon
    • Journal of the Korean Society of Food Culture
    • /
    • v.22 no.1
    • /
    • pp.127-139
    • /
    • 2007
  • This research was peformed to investigate the anthropometric data, blood profiles, and nutrient intakes of elderly persons living in a rural area. The subjects were 67 undernourished people who participated in follow-up nutrition intervention programs for9 weeks. Anthropometric data showed that the mean heights and weights in the management group were 157.6 cm and 59.1 kg, respectively, for the males and 152.6 cm and 51.0 kg, respectively, for the females. The mean BMIs of the management group were 23.8 kg/m$^2$ in the males and 22.4 kg/m$^2$ in the females. The total cholesterol, HDL-cholesterol, and albumin levels of the subjects were 181.7-191.4mg/dL, 48.3-53.0mg/dL, and 3.85-4.00g/dL, respectively. Energy, ash, P, Na, vitamin B$_1$, vitamin B$_2$, vitamin B$_6$, and niacin increased significantly after intervention for the management group. The mINQ, however, did not significantly increase after intervention. Also after intervention, there was no significant difference in mINQ between the management group and the comparison group. MAR (14) in the management group was significantly increased from 0.62${\pm}$0.2 before intervention to 0.68${\pm}$0.2 after intervention (p=0.022), and it was significantly different between the management group and the comparison group (p=0.017). MAR (8) in the management group was not significantly different (p=0.915) before and after intervention. However, MAR (8) between the management group and the comparison group did show a significant difference (p=0.031). MAR (3) in the management group was significantly increased from 0.48${\pm}$0.2 before intervention to 0.55${\pm}$0.2 after intervention (p=0.045), however, MAR (3) was not significantly different between the management group and the comparison group (p=0.093). For the probability of nutrient insufficiency, in the management group the probability of nutrient values below the EAR (except for Fe) decreased after intervention compared to before intervention. On the other hand, the probabilities of values above the RI, or EAR${\sim}$RI, were increased

Elevated Temperature Creep Behavior of Rapidly Solidified Al-9.45wt%Fe-4.45wt%Cr Alloy (급냉응고된 Al-9.45wt%Fe-4.45wt%Cr합금의 고온 크?거동)

  • Rhim, J.K.;Kim, K.H.;Kim, T.S.
    • Journal of the Korean Society of Safety
    • /
    • v.14 no.1
    • /
    • pp.208-215
    • /
    • 1999
  • The creep behavior of a rapidly solidified and consolidated Al-9.45wt%Fe-4.45wt%Cr alloy were investigated in the stress range 40 to 115 MPa and temperature range 300(0.53Tm) to 441$^{\circ}C$(0.66Tm). It is of use to available aerospace and automobile industries for the improved performance of materials used at high temperature. Because Al alloys with improved creep resistance offer the potential for lower weight and reduced costs in aerospace and automobile components (e.g., structural members and engine parts) through the replacement of heavier and more costly materials, the safety in use at high temperature is good. The alloy is characterized by high stress exponents and activation energies for creep, which are greatly dependent on the stress and temperature. Because the creep stress is seen to cause a strongly significant enhancement of coarsening, the coarsening rate of the dispersed particles in all crept specimens is faster than that in isothermally annealed specimens. Dislocations connecting dispersoids are observed more cofrequently in crept specimens with higher stress and lower temperature. The creep strain rates in the power law creep regime were found to be predicted much better by the Shorty and Rosler/Arzt equation with the inclusion of a threshold stress and dislocation detachment mechanism. The dispersoids in this alloy were acting a source of void nucleation that finally leaded to ductile fracture within the grain so called intergranular. Each void was initiated, grown and failed at the dispersoids in the aluminium matrix. Grain boundary accommodation of the slip produced, which result in initiation of the void and then final transgranular fracture. Therefore, it was confirmed that these dispersoids played an important role in the fracture mechanism by the formation of $Al_{13}Fe_4$, $Al_{13}Cr_2$ and $Al_2O_3$.

  • PDF

Development of a Java Compiler for Verification System of DTV Contents (DTV 콘텐츠 검증 시스템을 위한 Java 컴파일러의 개발)

  • Son, Min-Sung;Park, Jin-Ki;Lee, Yang-Sun
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2007.05a
    • /
    • pp.1487-1490
    • /
    • 2007
  • 디지털 위성방송의 시작과 더불어 본격적인 데이터 방송의 시대가 열렸다. 데이터방송이 시작 되면서 데이터방송용 양방향 콘텐츠에 대한 수요가 급속하게 증가하고 있다. 하지만 양방향 콘텐츠 개발에 필요한 저작 도구 및 검증 시스템은 아주 초보적인 수준에 머물러 있는 것이 현실이다. 그러나 방송의 특성상 콘텐츠 상에서의 오류는 방송 사고에까지 이를 수 있는 심각한 상황이 연출 될 수 있다. 본 연구 팀은 이러한 DTV 콘텐츠 개발 요구에 부응하여, 개발자의 콘텐츠 개발 및 사업자 또는 기관에서의 콘텐츠 검증이 원활이 이루어 질수 있도록 하는 양방향 콘텐츠 검증 시스템을 개발 중이다. 양방향 콘텐츠 검증 시스템은 Java 컴파일러, 디버거, 미들웨어, 가상머신, 그리고 IDE 등으로 구성된다. 본 논문에서 제시한 자바 컴파일러는 양방향 콘텐츠 검증 시스템에서 데이터 방송용 자바 애플리케이션(Xlet)을 컴파일하여 에뮬레이팅 하거나 런타임 상에서 디버깅이 가능하도록 하는 바이너리형태의 class 파일을 생성한다. 이를 위해 Java 컴파일러는 *.java 파일을 입력으로 받아 어휘 분석과 구문 분석 과정을 거친 후 SDT(syntax-directed translation)에 의해 AST(Abstract Syntax Tree)를 생성한다. 클래스링커는 생성된 AST를 탐색하여 동적으로 로딩 되는 파일들을 연결하여 AST를 확장한다. 의미 분석과정에서는 확장된 AST를 입력으로 받아 참조된 명칭의 사용이 타당한지 등을 검사하고 코드 생성이 용이하도록 AST를 변형하고 부가적인 정보를 삽입하여 ST(Semantic Tree)를 생성한다. 코드 생성 단계에서는 ST를 입력으로 받아 이미 정해 놓은 패턴에 맞추어 Bytecode를 출력한다.ovoids에서도 각각의 점들에 대한 선량을 측정하였다. SAS와 SSAS의 직장에 미치는 선량차이는 실제 임상에서의 관심 점들과 가장 가까운 25 mm(R2)와 30 mm(R3)거리에서 각각 8.0% 6.0%였고 SAS와 FWAS의 직장에 미치는 선량차이는 25 mm(R2) 와 30 mm(R3)거리에서 각각 25.0% 23.0%로 나타났다. SAS와 SSAS의 방광에 미치는 선량차이는 20 m(Bl)와 30 mm(B2)거리에서 각각 8.0% 3.0%였고 SAS와 FWAS의 방광에 미치는 선량차이는 20 mm(Bl)와 30 mm(B2)거리에서 각각 23.0%, 17.0%로 나타났다. SAS를 SSAS나 FWAS로 대체하였을 때 직장에 미치는 선량은 SSAS는 최대 8.0 %, FWAS는 최대 26.0 %까지 감소되고 방광에 미치는 선량은 SSAS는 최대 8.0 % FWAS는 최대 23.0%까지 감소됨을 알 수 있었고 FWAS가 SSAS 보다 차폐효과가 더 좋은 것으로 나타났으며 이 두 종류의 shielded applicator set는 부인암의 근접치료시 직장과 방광으로 가는 선량을 감소시켜 환자치료의 최적화를 이룰 수 있을 것으로 생각된다.)한 항균(抗菌) 효과(效果)를 나타내었다. 이상(以上)의 결과(結果)로 보아 선방활명음(仙方活命飮)의 항균(抗菌) 효능(效能)은 군약(君藥)인 대황(大黃)의 성분(成分) 중(中)의 하나인 stilbene 계열(系列)의 화합물(化合物)인 Rhapontigenin과 Rhaponticin의 작용(作用)에 의(依)한 것이며, 이는 한의학(韓醫學) 방제(方劑) 원리(原理)인 군신좌사(君臣佐使) 이론(理論)에서 군약(君藥)이 주증(主症)에 주(主)로 작용(作用)하는 약물(藥物)이라는 것을 밝혀주는 것이라고

Monitoring of Antimicrobial Resistant Bacteria from Animal Farm Environments in Korea (국내 축산 환경 중의 항생제 내성균 모니터링에 관한 연구)

  • Kwon, Young-Il;Kim, Tae-Woon;Kim, Hae-Yeong;Chang, Yun-Hee;Kwak, Hyo-Sun;Woo, Gun-Jo;Chung, Yun-Hee
    • Microbiology and Biotechnology Letters
    • /
    • v.35 no.1
    • /
    • pp.17-25
    • /
    • 2007
  • The kinds and quantity of antimicrobial agents used for cattle (animal industry) may be considerable, suggesting the possibility that pathogenic bacteria which cannot be extirpated by the existing antimicrobial agents could appear. Ten cattle, pig and chicken farms, respectively, were randomly selected from 5 provinces in Korea and the samples were collected from excrement, manure, underground water, farmers' hands and the neishboring environment. h total of 299 samples were examined and 197 of Escherichia coli, 13 of Campylobacter jejun/coli, 223 of Enterococcus faecium/faecalis and 42 of Staphylococcus aureus isolates were collected. All isolates were screened for antimicrobial resistance: 69.4% of E. coli (137/197 strains), 78.6% of S. aureus (33/42 strains), and 82.1% of E. faecium/faecalis (183/223 strains) were resistant to one antimicrobial agent and all of C. jejuni/coli Isolates showed the resistance to one antimicrobial agent. Meanwhile, the multiple resistance ratio for more than 4 lines of antimicrobial agent was 19.2% of E. coli (38/197 strains), 11.9% of S. aureus (5/42 strains), 15.4% of C. jejuni/coli (2/13 strains) and 6.2% of E. faecium/faecalis (14/223 strains). The antimicrobial resistance ratio of bacteria isolated from the cattle farm showed lower than that of bacteria isolated from the pig or chicken farm, which might be related to the quantify of antimicrobial agents consumed. And one strain of vancomycin resistant E..faecium (VREF) were isolated from the excrement of chicken and stream, respectively. Generally, the ratio of VREF collected in animal farm environments is lower than that of VREF collected in medical environment.

Anti-Inflammatory Effect of Sargassum patens C. Agardh Ethanol Extract in LPS-induced RAW264.7 Cells and Mouse Ear Edema (LPS로 유도된 RAW 264.7 cell과 마우스 귀 부종 모델을 통한 쌍발이 모자반 에탄올 추출물의 항염증 효과)

  • Kim, Min-Ji;Kim, Min-Ju;Kim, Koth-Bong-Woo-Ri;Park, Sun-Hee;Choi, Hyeun-Deok;Park, So-Yeong;Kim, Ji-Hyun;Jang, Mi-Ran;Im, Moo-Hyeog;Ahn, Dong-Hyun
    • Microbiology and Biotechnology Letters
    • /
    • v.45 no.2
    • /
    • pp.110-117
    • /
    • 2017
  • The anti-inflammatory effect of Sargassum patens C. Agardh ethanol extract (SPEE) was examined based on the lipopolysaccharide (LPS)-induced inflammatory response in this study. SPEE treatment was not cytotoxic to macrophages compared to the control. The production of NO was suppressed by SPEE by approximately 28% at $100{\mu}g/ml$, and levels of interleukin-6, tumor necrosis $factor-{\alpha}$, and $interleukin-1{\beta}$ decreased in a dose-dependent manner. In addition, the expression of inducible nitric oxide synthase, cyclooxygenase-2, and nuclear $factor-{\kappa}B$ was suppressed by SPEE treatment. In vivo, croton oil-induced mouse ear edema was attenuated by SPEE and the infiltration of mast cells into the tissue decreased. Based on these results, SPEE inhibits the release of LPS-induced pro-inflammatory cytokines and mediators, suggesting that SPEE is a potential agent for anti-inflammatory therapies.