• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.344-347
• /
• 2006

탄화수소 연료(LNG, LPG)를 개질하여 수소를 제조하는 연료 처리 공정 중, 탈황 기술은 촉매의 활성저하 및 전극의 피독을 방지하기 위한 필수 기술이다. 본 연구에서는 도시가스 및 액화석유 가스용 부취제로 사용되는 유기 황화합물(,DMS, THT, TBM)을 제거하기 위한 탈황제로서 Cu/ZnO계 흡착제를 개발하였다. 공침법을 이용하여 흡착제를 제조하여 각 부취제별로 상온 및 고온에서의 흡착탈황 성능을 조사하였으며 또한, 이의 특성분석을 행하였다. $Cu/ZnO/Al_2O_3$ 탈황제는 메탄으로부터 고온에서 TH, DMS, TBM+THT 등의 황화합물들을 매우 효과적으로 제거할 수 있었다. 특히, TBM+THT의 혼합가스에서 TBM에 대해 선택적인 흡착을 보였다. THT 흡착에서 흡착온도가 $300^{\circ}C$ 이상에서는, 흡착과정 동안 황의 상호작용으로 인해 금속황화물이 생성되었다.

• Journal of the Korean Ceramic Society
• /
• v.32 no.6
• /
• pp.719-725
• /
• 1995

ZST powders were synthesized by coprecipitation of (Zr4+, Ti4+)-hydroxide in the presence of SnO2 particles. Zn(NO3)2 was used as a sintering additive, and according to the adding sequence, sintering and dielectric properties were investigated. Sintered densities of ZST prepared by adding Zn(NO3)2 before calcination were a little higher than those added after calcination, and dielectric properties of the specimen added by Zn(NO3)2 after calcination were better (sintered at 125$0^{\circ}C$/2 h ; Q$\times$f(GHz)=49, 000, $\varepsilon$r=41) than before calcination (Q$\times$f(GHz)=42, 000, $\varepsilon$r=39.5). Through the observation of TEM, it was identified that the cause was due to the difference of the degree of Zn2+ diffusion into grains. With increasing sintering time from 2 to 8 hrs, grain size was doubled and dielectric properties were somewhat deteriorated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.344-344
• /
• 2008

최근 들어, 압전 세라믹스 제조기술의 급속한 발전으로 기계, 전자뿐만 아니라 휴대용 전자기기의 초소형 적층형 압전모터 및 압전변압기 같은 고품질 압전소자의 개발에 있어 특히 소자의 소형화에 따라 나노크기의 분말제조가 연구의 주류를 이루고 있다. 현재 이러한 나노크기의 세라믹스 제조에 사용되는 방법으로는 화학적 공침법, 졸겔법, 수열반응, 그리고 고에너지 볼밀법등이 보고되고 있다. 볼밀링 공정은 세라믹제조 시 필수 불가결한 공정이나 일반적으로 미세화에 그 한계가 있어 $1{\mu}m$이하의 입자크기를 가지는 분말은 제조가 곤란한 것으로 인식되어 왔다. 그러나 고에너지 볼밀을 이용한 볼밀링은 원료의 변형, 파괴 등과 같은 원료의 물리적 변화 뿐만 아니라 원료를 구성하는 원자/분자 구조에 영향을 미쳐 원료의 화학적 특성의 변화를 유발한다. 이러한 화학적 특성의 변화는 이종 원료간의 화학 반응성을 향상시켜 밀링 중에 새로운 화학종의 생성을 유발하게 되는데 이러한 현상을 mechanochemical 효과라 한다. 이러한 mechanochemical 효과는 나노 분말 입자의 제조뿐만 아니라, 분자설계, 재료합성, 자원처리 및 리사이클링 등에도 그 적용이 시도되고 있다. 이러한 mechanochemical 효과를 이용하여 분말을 미세화 함으로써 저온 소결과 재료특성 향상을 기대해 볼 수 있다. 따라서, 이번 연구에서는 우수한 압전 특성을 가진 PMN-PNN-PZT조성을 가지고 시편을 제작하였으며, 고에너지 볼밀시간에 따라 그 압전 및 유전특성을 조사하였다.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.29-37
• /
• 2017

Nuclear fuel cladding tube is fabricated by pilgering and annealing process. In order to remove impurity and oxygen layer on the surface, pickling process is carried out. When Zirconium(Zr) is dissolved and saturated in acid solution during the pickling process, all the waste acid including Zr is disposed. Therefore, $BaF_2$ is added into the waste acid to extract Zr and $Ba_2ZrF_8$ is subsequently formed. To recycle Zr by electrowinning process, $Ba_2ZrF_8$ is used as electrolyte, but it has high melting point ($1053^{\circ}C$). $ZrF_4$ should be added into $Ba_2ZrF_8$ to decrease the melting point. In this paper, it was investigated that $Ba_2ZrF_8$ was separated to $BaF_2$ and $ZrF_4$ by vacuum distillation. Firstly, $BaF_2$ with different particle size ($1{\mu}m$, $35{\mu}m$, $110{\mu}m$) was added into the waste acid and the respective precipitation property was estimated. $BaF_2$ obtained by vacuum distillation was shattered by ball-milling with different time. The precipitation efficiency was compared with $1{\mu}m$ of ${BaF_2}^{\prime}s$ one, which was not used as precipitation agent.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.862-870
• /
• 1994

$Pb(NO_3)_2$, $Mg(NO_3)_2$ and $NbCl_5$ were used as starting materials and made into solutions. For $Pb(Mg_{1/3}Nb_{2/3})O_3$ composition, each solution measured was mixed and heated to $70^{\circ}C$ to resolved $PbCl_2$ precipitated at lower temperature coprecipitates were formed by adding oxine and ammonia gas under pH ranging 8 to 10, and the prepared coprecipitates were filtered and washed by distilled water. The $Pb(Mg_{1/3}Nb_{2/3})O_3$ powders were synthesized by calcination of coprecipitates at the temperature range of $700^{\circ}C$ to $1000^{\circ}C$, for 5hr. The average particle size of the synthesized powders showing spherical shape was $0.3{{\mu}m}$. The powders were formed to make pellets under pressure of $2000Kg/cm^2$, and the formed pellets were sintered at the temperature range of 1100 to $1200^{\circ}C$, for 5hr. The speciman sintered at $1200^{\circ}C$ showed theoretical density of 97.4%, dielectric constatnt of 17000 at 1kHz, and dielectric loss of 0.02% at 1kHz

• Journal of the Korean Electrochemical Society
• /
• v.16 no.4
• /
• pp.191-197
• /
• 2013

The one of the cathode material, $Li(Ni_{0.5}Co_{0.2}Mn_{0.3})O_2$, was synthesized by the precursor, $Ni_{0.5}Co_{0.2}Mn_{0.3}(OH)_2$, from the co-precipitation method and the morphologies of the primary particle of precursors were flake and needle-shape by controlling the precipitation parameters. Identical powder properties, such as particle size, tap density, chemical composition, were obtained by same process of lithiation and heat-treatment. The relation between electrochemical performances of $Li(Ni_{0.5}Co_{0.2}Mn_{0.3})O_2$ and the primary particle morphology of precursors was analyzed by SEM, XRD and EELS. In the $Li(Ni_{0.5}Co_{0.2}Mn_{0.3})O_2$ cathode from the needle-shape precursor, the primary particle size was smaller than that from flake-shape precursor and high Li concentration at grain edge comparing grain center. The cycle and rate performances of the cathode from needle-shape precursor shows superior to those from flake-shape precursor, which might be attributed to low charge-transfer resistance by impedance measurement.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.1
• /
• pp.19-32
• /
• 2023

This study was conducted to remove fluorine (F) (initial concentration of 9.5 mg/L) from leachate of reclaimed mine waste dump site via different methods: (1) co-precipitation using Ca-based materials; (2) adsorption using activated carbon and fly ash; and (3) coagulation and sedimentation using alum. The F removal efficiencies of each case were estimated as 65.6% (Ca co-precipitation), 27.9% (adsorption of activated carbon), 71.5% (adsorption of fly ash), and 96.6% (alum coagulation and sedimentation). In addition, the applicability of the continuous treatment process using alum coagulation was evaluated by lab-scale experiments using simulated mine drainage containing F of lower (6.4 mg/L) and higher (15.7 mg/L) concentrations, and it was confirmed that the treatment of both cases met the domestic standard (below 3 mg/L) for discharged water in clean areas. Furthermore, the results of bench-scale field tests indicated that the water quality standard of discharged water could be satisfied with the proper operation and management of the process.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.151-156
• /
• 2018

As industry and medicine developed, many people became interested in the quality of life. As the concern for health became higher, vegetarian or vegetable oils became more popular than meat. With the development of processes primarily using nickel catalysts today, the shelf life of vegetable oils has increased and mobility has become more convenient. Currently nickel catalysts for the curing of oil are dominated by foreign companies in the world market. On the other hand, the mass production technology of domestic nickel catalyst is backward, and the entire amount is imported from foreign countries. Therefore, there is a need for active research and development of a catalyst that can be commercialized in korea. In this study, nickel as a main active catalyst was used as a base for hydrogen curing reaction, and the effect of rare earth on catalytic activity was investigated. A certain amount of rare earths could induce the dispersion of nickel to increase efficiency and use as co-catalyst.

• Clean Technology
• /
• v.27 no.1
• /
• pp.9-16
• /
• 2021

Since the active matrix organic light-emitting diode (AMOLED) encapsulation process is very vulnerable to moisture and oxygen, high-purity nitrogen with minimal moisture and oxygen must be used. In this study, a copper-based catalyst used to remove oxygen from nitrogen in the AMOLED encapsulation process was optimized. Two-component and three-component catalysts composed of CuO, Al2O3, or ZnO were prepared through a co-precipitation method. The prepared catalysts were characterized by using BET, XRD, TPR, and XRF analysis. In order to verify the oxygen removal performance of the catalyst, several catalytic reactions were conducted in a fixed bed reactor, and the corresponding oxygen contents were measured through an oxygen analyzer. In addition, reusability of the catalysts was proven through repetitive regeneration. The properties and oxygen removal capacity of the catalysts prepared with CuO and Al2O3 ratios of 6 : 4, 7 : 3, and 8 : 2 were compared. The number of active sites of the catalyst with a ratio of CuO and Al2O3 of 8 : 2 was the highest among the 2-component catalysts. Moreover, the reducibility of the catalyst with a ratio of CuO and Al2O3 of 8 : 2 was the best as it had the highest CuO dispersion. As a result, the oxygen removal ability of the catalyst with a ratio of CuO and Al2O3 of 8 : 2 was the best among the 2-component catalysts. The best oxygen removal capacity was obtained when 2wt% of ZnO was added to the sub-optimized catalyst (i.e., CuO : Al2O3 = 8 : 2) probably due to its outstanding reducibility. Furthermore, the optimized catalyst kept its performance during a couple of regeneration tests.

• The Journal of Natural Sciences
• /
• v.8 no.1
• /
• pp.61-69
• /
• 1995

It is hard to synthesize pure $BaTiO_3$ from $BaCO_3$ and $TiO_2$ in solid reaction for the activity of BaO and secondary phase. For this reason, the wet chemical techniques have been studied. Starting material which was used in these methods were expensive and the properties of powder which was synthesized in same defined. So, some process have been studying again to improve soild reaction method. This study which was one of those was to defin the forming mechanism of $Ba_2TiO_4$ and to control some condition of $Ba_2TiO_4$. The synthesis temperature of $BaTiO_3$ in solid reaction was near $1120^{\circ}C$. The quantity and forming temperature of $Ba_2TiO_4$ could be controlled by atmosphere heat treatment. $Ba_2TiO_4$ was related to expansion in Ba-rich region of $BaTiO_3$. $BaTiO_2O_5$ and $BaTiO_3O_7$ was reason to expand in Ti-rich region. The dielectrics of $CeAIO_3$ which was synthesized and sintered in reduction atmosphere and $BaTiO_3$ system were affected by $CeO_2$ which was formed for the decomposition of $CeAIO_3$ heat treatment in air.