• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.167-168
• /
• 2011

본 논문에서는 전기자동차 (Electric Vehicles, EVs)에 사용되는 탑재형 충전기 (On-Board Charger, OBC)에 적용된 부하직렬공진형 컨버터 (Series-Loaded Resonant DC-DC Converter, SRC)의 최적 공진주파수를 설계하기 위한 과정을 제시한다. 실제 OBC제품의 입 출력을 토대로 프로세스를 진행하여, 다양한 주파수에 따른 공진 네트워크를 구성한다. 그 결과로 얻어진 파라미터를 이용하여 스위칭 주파수에 따른 자성소자의 사이즈 변화 및 손실량 변화 추이를 분석하여 최적의 설계점을 찾는다.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.289-290
• /
• 2019

2차측 Multi-winding구조의 LLC공진형 컨버터는 교차조절(Cross-regulation) 특성에 의해 각 출력의 부하의 변화에 따라 출력전압의 불균형 문제가 있다. 본 논문에서는 2차측 Multi-winding 구조의 LLC공진형 컨버터에서 나타나는 교차조절 특성을 이론적으로 분석하고 240W급 LLC공진형 컨버터를 이용하여 실험을 진행한다. 실험 결과를 통해 출력 채널 수의 증가에 따른 교차조절 특성에 대해 고찰한다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.2
• /
• pp.95-104
• /
• 2011

In this paper, the metamaterial transmission line (TL) based on the complementary spiral resonators (CSRs) and interdigital structure is presented for reducing the phase noise of the voltage-controlled oscillator (VCO). The metamaterial TL is realized by adopting the array of the CSRs etched on the ground plane and the interdigital transmission line on the signal plane. The interdigital TL on the signal plane has been used to obtain higher Q value than the conventional TL without the interdigital structure. The resonance properties and inherent saturation of Q value of the proposed metamaterial TL have been analyzed by varying the width of the TL on the signal plane, dimensions of the CSRs, current directions between the CSRs, number of the unit cell-pair of the CSRs, and whether or not there is the interdigital structure in this paper. The phase noise and tuning range of the proposed VCO are -127.50~-125.33 dBc/Hz at 100 kHz and 5.744~5.852 GHz.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.474-479
• /
• 2016

As the Eco-energy is recently required, electrical energy is fast increased. Several induction heating methods are attractive for Eco-energy and energy saving. In this paper, electrical fan heater was designed and developed with new concept for energy saving by electromagnetic induction heating. Proposed system was composed of three module, blast part, induction heating part and power transformation part. Induction heating method was adapted for heating and the resonant inverter was used for increasing of the power transformation efficiency. Full-bridge resonant inverter was adopted to resonant inverter. This system was composed of induction heating part made with metal(SUS 40 series), and power transformation part made with rectifier module, filter module and resonant inverter. From these results, the proposed new electric heater could be saved the energy from faster increasing the temperature compared to commercial gas and other electric heater. This electrical fan heater is possible to be used in field of home, commercial and agricultural area for eco-energy saving heater.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.1
• /
• pp.46-53
• /
• 2009

A new zero-current switching LLC resonant post-regulator for multi-output power system is proposed in this paper. A conventional LLC resonant converter employs extra non-isolated DC/DC converters to obtain tight-regulated multi-slave output voltages. Therefore, it has several serious problems such as a poor efficiency and high cost of production. The proposed post-regulator features low voltage and current stress across the output rectifier diodes and power switches. Moreover, the proposed post-regulator requires only one power switch instead of the bulky and expensive non-isolated DC/DC converter. Therefore, it features a simple structure and lower cost. Especially, since the proposed post-regulator can ensure the ZCS of all power switches, it has very desirable advantages such as more improved EMI characteristics and reduced switching losses. Finally, to confirm the operation, validity, and features of the proposed circuit, experimental results from a proposed zero-current LLC resonant post-regulator are presented.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.517-525
• /
• 2011

Differential Vibrating Accelerometer(DVA) is a small and accurate resonant device to sense the change in natural frequency in presence of acceleration input. Both mathematical modeling for the electromechanical dynamics and experimental investigation on the structural characteristics are necessary for effective designs of precision controller and high Q-factor structure. In this paper, electromechanical modeling of the resonator of DVA, electrode module, and pre-amplifier is presented. The presented method is experimentally verified by measuring the resonance frequency, effective mass, effective stiffness and Q-factor. The direct comparison of the calculated displacement and the actual pre-amplifier of DVA also indicates the effectiveness of this study.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.1
• /
• pp.48-54
• /
• 2002

This paper is described the indirect induction heated boiler and induction heated hot air producer using the voltage-fed series resonant high-frequency inverter which can operate in the frequency range from 20 kHz to 50 kHz. A specially designed induction heater is composed of laminated stainless plates, which have many tiny holes and are interconnected by spot welding. This heater is inserted into the ceramic type vessel with external working coil. This working coil is connected to the inverter and turbulence fluid through this induction heater to moving fluid generates in the vessel. The operating performances of this unique appliance in next generation and its effectiveness are evaluated and discussed from a practical point of view.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.25-28
• /
• 2008

본연구는 부스트형 대기압 플라즈마 전원장치에 대한 연구로서 부스트형 전원장치는 플라즈마의 발생을 원활하게 하기위해 커패시터로 모델링되는 부하단에 인가되는 전압을 직접 제어하는 방식을 의미한다. 기존의 정현파 공진형 전원장치는 PWM기법을 이용하여 펄스의 폭을 증감하는 방식으로 전압의 크기를 제어하지만 이 방식은 별도의 공진회로를 이용하여 공진을 일으킨 다음 이를 부하에 인가하는 방식으로 구성되기 때문에 속응성이 떨어지고 균일한 플라즈마를 발생시키기 어렵다. 부스트형 전원장치는 별도의 부스트 컨버터로 직류전압을 제어하여 부하단에 입력되는 전압을 직접 제어하므로 매우 균일한 플라즈마를 발생시킬 수 있는 이점이 있으나 별도의 부스트용 스위치가 필요하고 이로 인한 효율의 감소 및 사이즈의 증가가 되는 문제점이 생긴다. 본 연구에서는 커패시터로 모델링되는 부하를 이용하여 직접 공진을 일으키고 공진된 부하 전압을 직접 부스트 스위치에 인가시키는 방식으로 부스트용 스위치의 소프트 스위칭이 가능한 새로운 방식을 개발하였다. 개발된 방식에서는 부스트용 스위치가 ZCS형태로 켜지고 ZVS형태로 꺼지는 특성을 갖게 되므로 별도의 추가 회로 없이도 획기적인 효율 증가와 방열판 사이즈의 감소로 인한 제품의 경량화가 가능한 장점이 있다. 또한, DC링크 커패시터의 최소화로 인하여 부하단의 아크 문제가 자동적으로 해결되는 장점도 있다. 제안된 제어 방식은 시뮬레이션과 실험으로 그 타당성을 입증하였다.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.209-210
• /
• 2016

프로토타입 컨버터 구현 시 전압/전류 제어기의 안정성, 제어 알고리즘, 정상적인 게이트 전압 제어가 보장되지 않은 경우 이를 수정하기 위해 사용하는 기존의 Trial and Error 방식은 조정에 많은 시간 및 비용이 소모된다. 본 논문은 이러한 시간적 비용 저감을 위하여 Control Hardware-in-the-Loop Simulation(CHILS)를 이용하여 제어기의 정상 동작 여부와 성능을 실시간으로 검증하는 방법을 제안한다. 이를 위해 LLC 공진형 컨버터를 CHILS로 구현하여, 개발된 DSP 제어기의 성능을 검증하고자 한다. 제안된 실시간 모의시험에서는 LLC 공진형 컨버터를 Matlab/Simulink에서 모델링 하여, 실제 DSP 제어기의 신호를 컨버터 모델에서 입력받아 모의시험장치의 출력 결과를 관찰함으로써 제어기의 동작 특성을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.3
• /
• pp.70-79
• /
• 1993

The application of A.C. motor to servo system is rapidly increased according to the recent advance of power electronics and digital control techniques. The induction motor which has a simple structure and needs less maintenance is used in the industrial field for the variable speed and position control recently. In this paper, the current characteristic of the full-bridge resonant inverter is studied by comparing with the computer simulation and the laboratory experiment when the ratio of forced frequency to the natural frequency and the ratio of conduction time to the period at the given frequency is changed. And then, the full-bridge resonant inverter is applied to the speed control of single phase induction motor.