• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.423-424
• /
• 2013

수 MW이상의 인버터 시스템을 구성하기 위해서는 계통연계형 인버터 다수가 PCC에 연결되어 계통과 연결된다. 이러한 경우 단일 인버터의 공진주파수가 LCL필터 값에 의해 결정되는 반면 각각의 인버터들이 서로 영향을 주고받아 공진주파수가 변화한다. 또한 공진주파수가 상용주파수에 가까워짐에 따라 시스템이 불안정해지고 기존의 액티브 댐핑기법으로 공진성분을 억제할 수 없다. 본 논문에서는 다수의 인버터가 계통연계 시 발생하는 공진 현상을 인버터 모델링을 통해 분석하고, 이러한 시스템에 적합한 액티브 댐핑기법을 제안한다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.1
• /
• pp.74-84
• /
• 1998

A doubly resonant ultrasonic transducer has been designed as an attempt to increase the bandwidth of underwater transducers. The dual resonance conditions were accomplished by attaching a single acoustic matching layer on the front face of a Tonpilz transducer consisted of an aluminum head, a piezoelectric ring, a brass tail and a prestress bolt. A modified Mason's model was used for the performance analysis and the design of transducers, and the constructed transducers were tested experimentally and numerically by changing the impedances and thicknesses of the head, tail and matching layers in the water tank. Two distinct resonance peaks in the transmitting voltage response(TVR) of a developed transducer were observed at 34.3 and 40.4 kHz, respectively, with the difference frequency of 6.1kHz and the center frequency of 37.2kHz. The values of TVR at these frequencies were 136.5 dB re $1\;\muPa/V$ at 34.3 kHz and 136.8 dB re $1\;\muPa/V$ at 40.4 kHz, respectively. Reasonable agreement between the experimental results and the numerical results was achieved. From this result, it is expected that the generation of the distinct resonances at any two desired frequencies can be achieved through the proper choice of the matching layer to provide the impedance transformation between the transducer and the medium.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.1-10
• /
• 1993

Frequency response functions(FRF) are the most fundamental data for the frequency domain identifications of structural systems. In this paper, an improved method for estimating FRF's is presented. The new FRF estimator takes the weighted average of two conventional estimators, $H_1$(f) and $H_2$(f), utilizing the fact that $H_2$(f) gives more accurate estimate at resonance, while $H_1$(f) yields better results at antiresonances. Based on the estimated FRF's, the modal parameters of the structures, such as, natural frequencies, damping ratios and mode shapes, are also estimated. The effectiveness of the proposed method is investigated through numerical and experimental studies. The estimated results indicate that the proposed estimator gives more accurate results than other estimators.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.242-243
• /
• 2017

기존 Digital Signal Processor (DSP)를 사용하여 높은 동작 주파수의 LLC 공진형 컨버터를 구동하는 경우 낮은 동작 주파수 분해능과 계산 속도에 의해 출력 전압 제어성능과 동특성에 한계가 생긴다. 이를 해결하기 위해 기존의 분해능 및 계산 속도 부족에 의한 영향을 분석하고 Field Programmable Gate Array (FPGA)를 설계하여 높은 동작 주파수 분해능 및 동특성을 얻고자 제안한다. FPGA를 이용한 성능향상을 DSP (TI - TMS 38335)와 FPGA (Xilinx XC7A100T)를 사용하여 비교 분석하고자 한다.

• Journal of the Korean Magnetics Society
• /
• v.20 no.6
• /
• pp.228-233
• /
• 2010

The microwave permeability was measured in order to analyze the thickness dependence of loss properties in CoFeHfO thin films with varying thickness of t = 57~1368 nm. A single resonance peak (P1) at 2.95 GHz was appeared in the samples with thickness less than 405 nm, while second resonance peak (P2) at 547MHz was additionally appeared in the samples with thickness greater than 405 nm. The P2 was originated by the angle distribution of the easy axis, which was confirmed from the measured results of the change of imaginary permeability with applied magnetic field in the sample of 1368 nm thickness and low field torque curves. If the second peaks can be reduced by minimizing the angle distribution of the easy axis, the CoFeHfO thin films with thickness greater than 400 nm can be used for the compact microwave devices operated at up to 2 GHz ranges.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.2
• /
• pp.183-189
• /
• 2007

Ultra precise processed parts are required together with the development of optoelectronics industry. As important parts of optoelectronics industry, there are ferrule of optical connector and lens for optical devices. In particular, the lens requires high reliability with high precision without including flaws. These optical modules need ultra precise processing in order to reduce the loss of light sources and various nondestructive inspections are carried out in the finishing stage to separate good and bad quality products. Therefore, it was analyzed through the characteristics of response of amplitude and resonant frequency according to the mass variations of aspheric lens that is used currently in laser printers.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.4
• /
• pp.8-12
• /
• 2003

Characteristics of optical transceiver module in radio frequency(RF) band were investigated with TO-can packaged Fabry-Perot laser diode(FP-LD). R-L-C parameters for equivalent circuit model of the LD were extracted with an impedance analyzer. With this model, impedance matching to the packaged LD could be performed by eliminating inductive components of the leads in the package by using lumped chip capacitors that have opposite reactance, while it shows resonance dip in low frequency band. The resonance dip could be removed using lumped elements for impedance matching by shifting the resonance frequency to the region out of interest.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1004-1005
• /
• 2015

본 논문에서는 고정주파수에서 제어되고, LCL 공진성분을 가지는 풀-브리지 형태의 dc-dc 컨버터에 대해서 논의하였다. 제안된 컨버터는 부하에 관계없이 컨버터 이득이 동일한 출력값을 가지는 주파수를 가지는 지점에서 동작하게 된다. 특히, 컨버터에서 부하변동에 대한 특성은 부하에 따른 컨버터의 스위치 전류에 대한 특성을 확인하기 위해서 공진탱크에 대한 입력 임피던스와 출력 임피던스를 크기와 위상을 부하변동에 따른 주파수 특성을 분석하였다. 이와 같이 제안된 컨버터에 대한 특성을 확인하기 위해서 요구사항에 적절한 성분을 선정하여 컨버터를 설계 및 제작하였다. 실험결과는 부하변동에 따른 컨버터의 특성을 검증하기 위해서 수행되었다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.1
• /
• pp.9-17
• /
• 2005

We studied the characteristics of impedance and electromechanical coupling coefficient in ZnO and AIN thin films by using resonance frequency spectrum method. The response peak of impedance decreased with the decrease of thickness of piezoelectrics, the number of mode of response peak decreased with the decrease of substrate thickness. An error of Kt² estimated from input Kt² increased as the thickness of piezoelectrics decreased and the thickness of substrate increased. Also, the error was increased in case of a large acoustic impedance of substrate. It was found that the composite resonator operating in optimized condition could be designed through the resonance frequency spectrum analysis of composited resonator consisted of piezoelectric thin film and substrate.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.1
• /
• pp.41-52
• /
• 2009

The surface treatment of titanium implant could bring out the biochemical bonding between bone and implant. The purpose of this study was to evaluate the biomechanical bone response of Mg-ion implanted implants with plasma source ion implantation method. Twelve New Zealand white rabbits were included in this study. Each rabbit received one control fixture (blasted with resorbable blasting media, RBM) and three types of Mg ion implanted fixtures in tibiae. The implants were left in place for 6 weeks before the rabbits were sacrificed. Removal torque value and resonance frequency analysis (ISQ) were compared. The repeated measured analysis of variance was used with $P{\leq}0.05$ as level of statistical significance. ISQ was not different among all groups. However, the ISQ was increased after 6 weeks healing. The group had lowest ISQ value showed the greatest increment. Mg-1 implants with 9.4% retained ion dose showed significantly higher removal torque value than that of the other implants. From this results, it is concluded that the Mg-1 implants has stronger bone response than control RBM surface implant.