• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2792-2794
• /
• 1999

본 논문에서는 컴팩트 형광램프용 조도제어형 전자식 안정기의 각 동작 모드별 해석과 설계 및 실험적 고찰을 제시한다. 부스트 컨버터와 해프브리지형 고주파 공진형 인버터를 결합한 일단계 인버터 안정기를 제안하고 그 기본동작 및 특성에 관해 검토한다. 역률을 높이기 위한 방법으로 부스트단에서는 전류불연속 모드로 동작하도록 하였다. 전력 손실을 줄이기 위해 직렬 공진형 인버터는 영전압 영전류 스위칭 방식을 적용하였다. 출력 전압을 조정할 수 있도록 설계하여 조도제어를 구현하였으며 다단계의 조도제어가 가능해진다. 전자식 안정기 시스템을 구성하기 위한 이론적인 근거를 마련하기 위하여 공진형 인버터를 동작 모드별로 해석하고 그 결과를 토대로 동작주파수 및 회로정수를 결정하며, 실제 전자식 안정기를 제작하여 시동특성과 조광특성을 비교 분석하였다. 36W 형광램프에 대한 실험 결과와 등가회로 모델에 의한 Pspice 시뮬레이션 결과를 토대로 제안한 전자식 안정기의 적용가능성을 입증하였다.

• Journal of Power System Engineering
• /
• v.4 no.4
• /
• pp.16-24
• /
• 2000

고체내의 열에너지의 전달을 분석하기 위하여 고전적인 Fourier 열전도 법칙과 에너지 보존식에서 유도되는 열전도 방정식을 사용해 왔다. 이러한 열전도 방정식은 열전도가 무한한 속도로 진행된다는 것을 의미하고 있다. 그러나 극저온상태에서나 매우 급속한 열전도과정 중 매우 짧은 시간의 상태에서 non-Fourier 모델에 기초를 둔 쌍곡선형 열전도 방정식이 도입되었다. 최근의 이에 관한 연구에서 열전도가 파장의 형태로 유한한 전파속도를 갖는다는 것이 실험적으로 증명되었고 이로부터 여러 가지 실험적인 해석과 이론 해석이 전개되었다. 본 논문에서는 열전파 속도의 유한한 성질을 나타내는 수정된 열전도 법칙을 이용하여 1차원 평판에 대하여 공간에 대한 finite Fourier 변환 방법과 Green 함수 방법으로 해석하여 열전도파의 파동 성질, 공진 현상 및 위상차를 고찰하고자 한다. 열전도파가 갖는 모달 주파수에 대해 임계값을 갖으며 이 임계값을 초과할 때 공진 현상과 위상차를 고찰할 수 있었다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.3
• /
• pp.177-187
• /
• 2009

This paper describes the gain characteristics of Multi-output LLC series resonant converter by using the new analytical method. Specially, using the Math-CAD simulated result, this paper analyzes an influence from the secondary leakage inductance of transformer. The theoretical results are verified through an experimental prototype of the 430W 3-output LLC resonant converter for 46inch PDP power module.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2
• /
• pp.92-100
• /
• 1995

In this study, the bearing defects were modeled and the vibration of ball bearing faults was presented for the defective pattern. The vibration signal was measured for the single and multiple defected ball bearing at the various defect positions and rotation speed, and then the signal components using the HFRT(high frequency resonance technique) were analyzed by FFT. The experimental data analysis has shown that the frequencies generated in the single or multiple defected ball bearings appear with the characteristic defect frequency and harmonics of ball pass frequency peak. Signal processing by HFRT makes it possible not only to detect the presence of a defect but also to diagnose the defect part of the bearing.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.1
• /
• pp.18-26
• /
• 2000

In this paper, piezoelectric transducer was theoretically analyzed to fabricate high frequency piezoelectric transducer with broadband characteristics. Piezoelectric transducer have been fabricated with 3.825${\mu}m$ ZnO film on Pt/Sapphire(0001), and its appilicability of transducer was confirmed with analyzing theoretical and experimental frequency characteristic. The resonance frequency was detected at the frequency of 827.47MHz corresponding to the half-wavelength frequency of ZnO thin film. Insertion loss was almost -50dB. The minimum insertion loss agrees with simulation analysis.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.1
• /
• pp.1-7
• /
• 2007

This paper presents a study on acoustic characteristics and sound generation mechanism of Cryptotympana atratas' songs which cause noise problems in summer days. The waveforms & FFT of Cryptotympana atratas' songs in nature were analyzed, and the actions of tymbals were visualized by the high speed camera. In order to know resonance frequency of the abdominal cavity of male Cryptotympana atrata, the sine sweep test was done. It was observed from the experimental results that Cryptotympana atrata's two tymbals act asymmetrically with respect to time & shape, and make a variety of frequencies every time it vibrates. It was also shown that Cryptotympana atratas' have a structure that cause resonances sounds only in a $7{\sim}7.5 kHz$ bandwidth.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.402-408
• /
• 2017

In this paper, we analyzed the frequency characteristics of hexagonal spiral thin-film inductor based on non-contact AC coupling for wireless signal transmission. We compared and analyzed the frequency characteristics of the rectangular spiral inductor and the hexagonal spiral inductor according to the number of turns, the line width and the line spacing of the conductor. Hexagonal spiral inductor has more number of turns to has the same inductance as rectangular spiral inductor, but the overall length of the conductors is shortened. This reduces the self inductance and increases the mutual inductance so that the overall inductance can have the same value. Also, since the overall length of the conductor is shortened and the magnetic resistance is reduced, the quality factor and the self-resonant frequency performance can be secured. The proposed hexagonal spiral thin-film inductor has the inductance of 3.54nH at 2GHz, the quality factor of max 14.00 at 5.0GHz and the self-resonant frequency at about 11.3GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.107-116
• /
• 2001

In this thesis, characteristics of compact PIFA are analyzed for operation in dual frequencies (dual-PIFA) as variety of parameters. The antenna is composed of two patches. These are operated in high frequency and low frequency. The dimension of experiential antenna is fixed for attaching at the handset. The variable parameters are dimension of small patch, length of shorting strip and dimension of folded conductor plate, the frequencies are 900 MHz and 1800 MHz. The compact antenna is implemented with 2-layer type, electric field intensities and radiation patterns are simulated. In order to analyze characteristics of a performance as variety of parameters, FDTD method is used.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.777-783
• /
• 2015

Wood is an anisotropic material that shows the changes in hardness, quality and dimensions depending on the types of cells on three cross sections, size, array and so on. It can also be used in different ways according to its use, which requires a meticulous research, in order to maximize the utilization by understanding the nature and use; and by clarifying the theory and technologies. The research on relationship among wood's physical properties, density, and elasticity of modulus have been studied in Korea and abroad, but those studies were based on correlation gained through standardized specimen. Rather, the study on complete product is rare. Moreover, the previous reports are mostly concentrating on vibration mode and batting, though the wood's physical properties as a material have not been in the main focus. Therefore, this study will carried out for analyzing MOE through figuring material property out and comparing frequency adapting to the Canadian HardMaple bat. For comparison of material properties, we studied the annual ring and density of the bat; calculated the MOE with resonance frequency and formula (ASTM C1259); and verified the repulsive force of this material. As a result, the relevance of the resonance frequency and annual ring is weak, and in comparison in the grain direction in wood, the MOE value is higher when the grain direction in wood is excited horizontally than when is excited vertically, because the material is repulsive when grain direction is horizontal.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.319-321
• /
• 2003

본 연구에서는 electron acceptor로서 널리 이용되는 viologen의 전하 이동에 대하여 연구하였다. 자기조립법을 이용하여 단분자막을 형성하였으며, 그 형성과정은 수정진동자의 공진주파수와 공진저항을 이용하여 실시간으로 분석하였다. 두 단계의 가역적인 산화환원 반응시의 전하 이동을 정량적, 정성적으로 분석하기 위하여 전기화학 분석 방법 중 cyclic voltammetry법을 행하였으며, 단분자막이 형성된 수정진동자를 작업전극으로 사용하였다.