• Journal of the korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.1-6
• /
• 1995

천연가스 자동차의 배출가스 정화특성은 가솔린보다 우수하며 대기오염물질이 전반적으로 매우 낮아 천연가스 자동차의 저공해성을 확인할 수 있다. 이를 위한 촉매개발 기술에서는 Pb촉매가 메탄의 산화에 유리하며, 촉매구조는 Single-bed 보다 Dual-bed type이 메탄의 정화율에 유리하다는 것을 알았다. 각종 배기성분의 공존영향에서는 공존하는 NOx, H$_{2}$O가 메탄의 산화반응을 억제하는 요인으로 작용함을 알았다. 그리고, 천연가스 전용촉매는 초기 내구성이 급격히 저하하는 특성이 있는데, 이는 Lanthanoid 조촉매를 사용하므로써 개선의 가능성을 보이고 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.573-576
• /
• 2007

가스 하이드레이트의 구조-I 및 구조-H의 공존 현상을 13C NMR과 Raman spectroscopy를 이용하여 분석하였다. 하이드레이트 생성 조건이 구조-H 영역에만 있을 때는 CH4+neohexane 혼합 하이드레이트가 구조-H만을 나타냈지만, 구조-I의 영역에서는 구조-H의 혼합 하이드레이트와 구조-I의 순수 메탄 하이드레이트가 공존하는 것을 $^{13}C$ NMR spectra를 통해 확인하였다. 이러한 현상은 구조-H 생성자로 알려진 isopentane, MCP, MCH 에서도 관찰되었으며, Raman spectroscopy를 이용해서도 확인할 수 있었다.

• Ceramist
• /
• v.7 no.3
• /
• pp.62-67
• /
• 2004

세계 각국의 경쟁적인 산업화는 인간 환경에 있어서 많은 변화를 가져왔다. 이러한 환경의 변화에는 보다 편리한 삶이라는 긍정적인 측면 이외에 산업화에 수반되는 각종 유해 물질에 의한 환경 오염이라는 부정적인 측면이 공존한다. 여러 가지 형태로 극 미량 존재하는 유해 공해 물질의 검출은 인간 삶의 질적 향상을 위해 중요한 분야가 되고 있다. (중략)

• Journal of Korea Soil Environment Society
• /
• v.5 no.3
• /
• pp.35-54
• /
• 2001

It is difficult to accurately predict each flow rate of landfill gas and leachate extracted from many of wells, which have been completed into a waste landfill containing gas and water. However it may be approximately predicted if we can define only relative fluid permeability of gas and leachate flowing through landfill porous media. Therefore numerical simulation using multi-phase flow equations makes use of ei s input data of the relative permeability which is measured and calculated in laboratory environment like in-situ, and consequently we can quantitatively obtain each flow rate of gas and leachate from collection wells. These series of technologies can provide with the important informations to determine the success or failure of landfill gas energy and landfill stabilization. This paper analyses the characteristics of landfill gas collection by six classes of case studies for none described landfill.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.2
• /
• pp.362-366
• /
• 2007

As the industry of 21C has been developed, the gas industry has been grown and its convenience but it accompany risk for using gas. Therefore, we designed a vent area to prevent the collapse of the booth by the explosion pressure during test. The explosion booth was installed fur training safety supervisors to aware the risk of gas explosion. The vent area was designed based on the exhaust model of NFPA 68. It was calculated at $2.8297m^2$ for LPG and at $3.0518m^2$ for NG.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1999.06a
• /
• pp.243-248
• /
• 1999

20세기에 들어와 세계적인 정유산업과 석유화학산업의 눈부신 발전에 부응하여 우리나라에서도 1960년에 국내최초의 정유공장인 대한석유공사가 미국의 Fluor사와 합작으로 울산에 건립된 후 약 40여년의 세월동안 국내의 정유산업, 석유화학산업, 가스산업분야도 괄목할만한 발전과 성장을 이루었다고 할 수 있다. 또한 경제규모가 커지고 생산과 소비가 따라서 확대되어 인구의 도심지역 편향현상이 생겨 이러한 위험물 취급소가 수도권의 부도심지역과 대도시 부근의 주거지역에 공존하게 되었다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.337-338
• /
• 2003

산업구조가 고도화함에 따라 대기오염물질의 배출원이 다양해지고 배출물질의 종류 또한 예전과 비교 할 수 없을 정도로 증가하였다. 휘발성유기화합물질(Volatile Organic Compounds : 이하 VOCs라 한다)은 질소산화물과 공존시 태양광선의 영향으로 광화학스모그를 유발시키는 주요원인이며, 자동차와 석유화학제품 관련시설의 급격한 증가로 배출량도 증가추세에 있다. (중략)

• Journal of the Korean Institute of Gas
• /
• v.11 no.3
• /
• pp.19-25
• /
• 2007

The heat transfer phenomena in a coil-typed LPG vaporizer with a hot water bath employed an electrical heating system were experimentally analyzed. The heat energy is initially used to sensible heat region to heat LPG and then is done to latent heat region to vaporize LPG and to heat up the vaporized gas. A two-phase flow region could be found from periodic temperature fluctuations, and only sensible heat effect was found after passing through the region. The overall heat capacity was defined as multiplying the overall heat transfer coefficient by the heat transfer area and we found a correlation employing the heating water temperature and LPG flow rate. The results of this work can effectively be applied for the design of field scale LPG vaporizers in the near future because they can predict the features of heat transfer on a kind of coil type LPG vaporizer.

• Journal of the Korean Institute of Gas
• /
• v.25 no.4
• /
• pp.49-56
• /
• 2021

Liquefied Petroleum Gas is divided into liquefied gases containing propane (C₃H₈) and butane (C₄H₁₀). The quality of LPG varies greatly depending on the composition of the mixture, so it is important to measure the composition accurately. It is difficult to determine the composition of the mixture because liquid and gas coexist at room temperature. Therefore, the uncertainty in determining the concentration of hydrocarbons by component is high, and there are many problems that differ from the actual content standard. Therefore, it is necessary to develop a mixed liquid propane standard gas for the composition and accurate concentration of hydrocarbon substances. Mixed liquid propane standard gas is manufactured into bellows-type constant-pressure cylinders by ISO-6142 (2015). The homogeneity of the four standard gases manufactured was confirmed to be GC-FID. The manufacturer's uncertainty of expansion was 0.01 % to 0.30 % and homogeneity was 0.03 % to 0.25 %. In this mixed liquid propane standard gas, the relative expansion uncertainty of weight method, manufacturing consistency, cylinder adsorption and long-term stability was developed within 0.26 %-1.3 9% (95% of confidence level, k=2).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1220-1226
• /
• 2007

As the industry of 21C has been developed, the gas industry has grown and it has not only the convenience but also the riskiness fer using. Especially, the energy and environment problems have been getting serious after the modern industry revolution. Therefore, the demand of gas as an eco-friendly energy source is getting increased. With the demand of gas, the installation and use of gas boiler is also increased, so human life injury by the waste gas(CO) of boiler goes on increasing every year. Therefore, we want to find out the harm to human body through the study on the concentration of CO by the length of the curved exhaust tube of boiler. The allowable concentration of CO is 50ppm. The length of the one-meter-three-curved tube after three minutes is applicable to 50ppm of the threshold limit values of CO. Also, five meters exceed the threshold limit values of CO after five minutes. Strangely, the concentration of CO is under the threshold limit values from two to four meters.