• Management & Information Systems Review
• /
• v.31 no.1
• /
• pp.205-219
• /
• 2012

This study is to understand how why users fail to service and how users use service recovery strategics. This study use equity theory to understand how perceived justices have influence on trust and to identify how trust has influence on service quality. This study used scenario techquie to get user experience of service failure in smartphone application. Scenario is composed of 16 sub scenario and we conducted survey with each case. The results show that interpersonal justice and distributed justice have significantly influence on trust. However, procedural justice has not influence on trust. Service quality is influenced by trust. This paper conclude with statements of implications and limitations of the study results.

• Resources Recycling
• /
• v.23 no.6
• /
• pp.54-62
• /
• 2014

This paper present a improved process for remanufacturing of LPG vaporizer through Failure Mode and Effect Analysis(FMEA). Based on the failure causes analysis and classification of faults that occur after the initial failure of LPG vaporizer remanufacturing, suggests improvements for high R.P.N. Derive the improvement for higher cumulative frequency of each process, proposes the overall improvement of a current process for establish a standard LPG remanufacturing process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.265-265
• /
• 2014

일반적으로 태양전지 및 반도체 공정에서 불순물 주입 과정인 도핑(Doping)공정은 크게 몇 가지 방법으로 구분해 볼 수 있다. 소성로(Furnace)를 이용하여 열을 통해 불순물을 웨이퍼 내부로 확산시키는 열확산 방법과 진공 챔버 내부에서 전자기장을 걸어 이온을 극도로 가속시켜 진행하는 이온 주입(Ion implantation)이나 이온 샤워(Ion shower)를 이용한 도핑 방법이 있다. 또한 최근 자외영역 파장의 레이저광을 조사하여 광화학 반응에 의해 도펀트 물질를 분해하는 동시에 조사 부분을 용해하여 불순물을 도포하는 기법인 레이져 도핑(Laser doping) 방법이 개발중이다. 그러나 레이져나 이온 도핑 공정기술은 고가의 복잡한 장비가 필요하여 매출 수익성 및 대량생산에 비효율적이며 이온 주입에 의한 박막의 손상을 치료하기 위한 후속 어닐링(Post-annealing) 과정이 요구되는 단점을 가지고 있고 열확산 도핑 방법은 정량적인 불순물 주입 제어가 어렵고 시간 대비 생산량의 한계가 있다. 반면 대기압 플라즈마로 도핑을 할 경우 기존에 진공개념을 벗어나 공정상에서 보다 저가의 생산을 가능케 할 뿐아니라 멀티 플라즈마 소스 개발로 이어진다면 시간적인 측면에서도 단연 단축시킬 수가 있어 보다 대량 생산 공정에 효과적이다. 따라서 본 연구에서는 새로운 도핑 방법인 대기압 플라즈마를 이용한 도핑 공정기술의 가능성을 제안하고자 도핑 공정 시 웨이퍼 내 전류 패스(Current path)에 대한 메카니즘을 연구하였다. 대기압 플라즈마 방전 시 전류가 웨이퍼 내부에 흐를 때 발생되는 열을 이용하여 도핑이 되는 형식이란 점을 가정하고 이 점에 대한 원리를 증명하고자 실험을 진행하였다. 실험 방식은 그라운드(Ground) 내 웨이퍼의 위치와 웨이퍼 내 방전 위치에 따라 적외선 화상(IR image: Infrared image) 화상을 서로 비교하였다. 적외선 화상은 실험 조건에 따라 화상 내 고온의 표식이 상이하게 변하는 경향성을 나타내었다. 이 고온의 표식이 전류 패스라는 점을 증명하고자 시뮬레이션을 통해 자기장의 전산모사를 한 결과 전류 패스의 수직 방향으로 자기장이 형성이 됨을 확인하였으며 이는 즉 웨이퍼 내부 전류 패스에 따라 도핑이 된다는 사실을 명백히 말해주는 것이며 전류 패스 제어의 가능성과 이에 따라 SE(Selective Emitter) 공정 분야 응용 가능성을 보여준다.

• Journal of Digital Convergence
• /
• v.15 no.12
• /
• pp.369-380
• /
• 2017

Purpose: This study was conducted to examine how nurse practice environment and organizational justice affected job embeddedness in the Small and Medium Sized Hospital Nurses. Methods: The data were collected from 233 nurses by means of self-reported questionnaires on August 23th to September 8th, 2017. Results: The model explained 49.7% of the total variance in job embeddedness scores. Hierarchical regression analysis showed that hospital nurses that had higher perceived nurse practice environment, higher organizational justice, and were older were more likely to have higher job embeddedness scores. Conclusion: To enhance nurses' job embeddedness, hospital and nurse leaders should improve nurse practice environment, particularly in relation to staffing and resource adequacy and collegial nurse-physician relations. Additionally, the nurse leaders can facilitate nurses' job embeddedness by creating and maintaining an organizational culture of fairness and justice.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2079-2086
• /
• 2014

Shipbuilding production management is one of the most significant activities in productivity improvement. Shop-floor managers and production planners still do not have enough production information for shop-floor scheduling due to shortage of information sharing among them. In this research, main issues were derived from requirement analysis between production planning and shop-floor control to establish a software system architecture for ship production monitoring system(SPMS), which is developed with component based design(CBD). The proposed system's key functions cover from block shop assembly to quay outfitting stage to visualize production progress as well as to maximize production information sharing. The system will allow more reliable and accurate production information to permeate down to members of the workforce just in time.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.499-505
• /
• 2022

This study presents a conceptual design of vanillin production from Kraft lignin. Most of the existing Kraft lignin is used as low-quality boiler fuel or discarded as wastewater, and only 2% or less of lignin has been refined into high-quality products. We propose the process developed in this study to utilize discarded Kraft lignin. The existing vanillin production concept process consisted of alkali oxidation using NaOH, filtration, chromatography, and crystallization. Chromatography, which is difficult to commercialize, was changed to a solvent extraction process. The recovery rate of vanillin of the proposed solvent extraction process is 92.9%, and the purity is 99.5%, which is similar to the existing chromatography process. The reason why the solvent extraction process showing similar results to chromatography can replace the existing chromatography process was analyzed.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.4
• /
• pp.349-360
• /
• 2017

In concrete construction work, formwork is an important process that accounts for 10% of the total construction cost. Recent buildings are becoming bigger and higher. In order to maximize the efficiency and safety of this formwork, the system of formworking has been systematized. However, the human accidents and the noise complaints arise from dismantling processes frequently occur. In order to solve these problems, most of them are dependent on foreign technology, but they do not take into consideration the conditions of domestic construction site. In this study, we developed a table type multi-drop system form for a slab and beam which can improve the process, safety and reduction of disassembly noise, and evaluated the physical properties of the main members which are used in the system. The results of this study show that there is sufficient strength to be used as a slab and a laying material for both a yoke beam and a supporting post. The noise level is improved compared to existing method.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.3
• /
• pp.34-42
• /
• 2012

Green frame technology intended to facilitate the remodeling of apartment housing complexes in Korea and extend their service life has been developed. Green frame design is a Rahmen structure using composite precast concrete members and, unlike a bearing-wall structure, lifting and installing structural members accounts for major steps of structural construction. Therefore, if green frame structure construction is to be scheduled appropriately, systematic lifting plan needs to be developed in advance. Development of lifting plan also requires unit lifting process of composite PC members (columns and beams) that consist of green frame to be analyzed first. Therefore, this study attempts to analyze the lifting process of composite PC members used in green frame structure. To that end, lifting procedure and time of composite PC column and beam are estimated and applied to a project case to analyze the lifting cycle of reference floor. Outcomes produced herein will be used as key data for development of lifting plan in subsequent green frame structure construction.

• Journal of Life Science
• /
• v.17 no.9 s.89
• /
• pp.1260-1265
• /
• 2007

Magnetically separable enzyme-coated nanofibers were developed for the hydrolysis of starch. Stability of ${\alpha}-amylase-coated$ nanofiber was greatly improved and its residual activity was maintained over 92.7% after 32 days incubation at room temperature and under shaking conditions (200 rpm). The recovery of enzyme was high and enzyme activity after 10 recycle was 95.2% of its original activity. Developed enzyme-coated nanofibers were used for the hydrolysis of starch. When 0.5 mg of magnetically separable enzyme nanofibers was used, 40 g/l of starch (2 ml) was completely degraded within 40 min. The continuous enzyme reactor was developed and used for starch hydrolysis and 76% of starch (30 g/l) was hydrolyzed with 1 hr residence time.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.149-149
• /
• 2011

아르곤 기체의 방사세기 또는 그 세기 비는 플라즈마 공정 진단에서 일반적으로 사용된다. 본 실험에서는 100 mTorr 압력 조건하의 유도결합 플라즈마(13.56 MHz)에서 E-H 모드 전이 영역, rf 바이어스(12.5 MHz) 전력 인가 및 N2 혼합 시 단순화한 충돌-방사 모델에 기초한 광방사 세기비 방법을 적용하여 플라즈마 변수를 진단하였다. 개발 프로그램 기반의 분광기를 사용하여 아르곤 기체의 특정 파장(750.4, 751.5 그리고 811.5 nm)들을 관측하였고, 동일한 조건하에서 정전 탐침법으을 이용하여 전자 에너지 분포함수의 변화도 측정 하였다. 맥스웰 전자 에너지 분포를 가정하는 일반적인 경우와 비교하여 볼 때 실제적인 전자 에너지 분포함수의 측정은 전자의 가열 메커니즘에 대한 상세한 정보를 제공함과 동시에 플라즈마 재흡수에 대한 보정을 가능하게 해준다. 광방사 세기비법에 의해 측정된 결과에 의하면, 750.4 nm/751.5 nm는 높은 에너지(>13.08 eV)의 전자들의 유효 전자온도에 대한 정보를 나타내는 반면 811.5 nm/750.4 nm는 아르곤 준안정 준위 밀도(1s5)에 대한 정보를 제공하게 된다. 수행된 실험 조건하에서, 측정된 준안정 준위 밀도는 E-H 모드 전이 영역에서 최대값을 나타내었고 바이어스 전압 및 N2 기체 혼합 비율이 증가함에 따라 감소하는 결과를 얻었다. 유효 전자온도의 경우 광방사 세기비법과 정전 탐침법 모두 같은 결과를 보여 주었는데, E-H 모드 전이 영역에서는 전자온도는 거의 일정하였고 바이어스 전압 및 N2 기체 혼합 비율이 증가함에 따라 전자온도는 증가하였다. 이러한 실험 결과는 방전 모드 전이, 바이어스 인가 그리고 혼합 기체 사용하는 공정 플라즈마를 이해하는데 있어 이들 변수의 진단이 중요한 요소임을 보여준다.