• Journal of the Korea Society of Computer and Information
• /
• v.13 no.6
• /
• pp.173-180
• /
• 2008

Certified e-Document Authority keep it with protection legal as a system a guarantee and identifies originality of an e-Record, It presume to be authenticity e-Records and contents of an e-Record prove what was not changed. But, e-Records has high medium degree of dependence and loss danger of information has very high problems. In addition, Because correction(attachment and deletion) and a revision of information are easy, a problem for integrity and the originality of an e-Record is caused. Existing system show the following inefficient. For the originality guarantee, an existing e-Documents encryption method accomplishes a encrypted process of a whole document with a symmetric key, if the information revised midway, the whole documents content must accomplish re-scanning and re-encryption process again. To get over such inefficient, this paper maximize efficiency which occurred at the time of partial information revision request by encryption and managing using the link information based on the linkage characteristics of the each page on the registered requested e-Documents, It was able to increase security configuration by minimizing problems on an information exposure through increasing complicated of the key management.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.39-52
• /
• 2021

Purpose: Recently, due to increasing usage of high-tech equipment for facility inspection, the need of verifying high-tech equipment is being emphasized. Therefore, the purpose of this paper is to develop performance evaluation methodology of tunnel scanners that inspect tunnel facilities. Method: This paper describes literature reviews regarding the performance evaluation methodology of high-tech based equipment for facility inspection. Based on these investigations and expert advisory meetings, this paper suggests a performance evaluation methodology of tunnel scanner. Result: First evaluation indicator states minimum performance standards of tunnel scanners. Second evaluation indicator is related to tunnel scanner quality. Conclusion: The performance evaluation methodology can provide reliable equipment performance catalogues, helping users to make a proper selection of equipment. Also, developers of equipment can get authorized verification of performances, preventing poor maintenance of facilities.

• Journal of Distribution Research
• /
• v.17 no.5
• /
• pp.1-23
• /
• 2012

The conflict between major corporations and small and medium-sized businesses is being aggravated, the trickle down effect is not working properly, and, as the controversy surrounding the effectiveness of the business limiting system continues to swirl, the plan proposed to protect the business domain of small and medium-sized businesses, resolve polarization between these businesses and large corporations, and protect small family run stores is the suitable business type designation system for small and medium-sized businesses. The current status of carrying out this system of selecting suitable business types among small and medium-sized businesses involves receiving applications for 234 items among the suitable business types and items from small and medium-sized businesses in manufacturing, and then selecting the items of the consultative group by analyzing and investigating the actual conditions. Suitable business type designation in the service industry will involve designation with priority on business types that are experiencing social conflict. Three major classifications of the service industry, related to the livelihood of small and medium-sized businesses, will be first designated, and subsequently this will be expanded sequentially. However, there is the concern that when designated as a suitable business type or item, this will hinder the growth motive for small to medium-sized businesses, and designation all cause decrease in consumer welfare. Also it is highly likely that it will operate as a prior regulation, cause side-effects by limiting competition systematically, and also be in violation against the main regulations of the FTA system. Moreover, it is pointed out that the system does not sufficiently reflect reverse discrimination factor against large corporations. Because conflict between small to medium sized businesses and large corporations results from the expansion of corporations to the service industry, which is unrelated to their key industry, it is necessary to introduce an advanced contract method like a master franchise or local franchise system and to develop local small to medium sized businesses through a franchise system to protect these businesses and dealers. However, this method may have an effect that contributes to stronger competitiveness of small to medium sized franchise businesses by advancing their competitiveness and operational methods a step further, but also has many negative aspects. First, as revealed by the Ministry of Knowledge Economy, the franchise industry is contributing to the strengthening of competitiveness through the economy of scale by organizing existing individual proprietors and increasing the success rate of new businesses. It is also revealed to be a response measure by the government to stabilize the economy of ordinary people and is emphasized as a 'useful way' to revitalize the service industry and improve the competitiveness of individual proprietors, and has been involved in contributions to creating jobs and expanding the domestic market by providing various services to consumers. From this viewpoint, franchises fit the purpose of the suitable business type system and is not something that is against it. Second, designation as a suitable business type may decrease investment for overseas expansion, R&D, and food safety, as well negatively affect the expansion of overseas corporations that have entered the domestic market, due to the contraction and low morale of large domestic franchise corporations that have competitiveness internationally. Also because domestic franchise businesses are hard pressed to secure competitiveness with multinational overseas franchise corporations that are operating in Korea, the system may cause difficulty for domestic franchise businesses in securing international competitiveness and also may result in reverse discrimination against these overseas franchise corporations. Third, the designation of suitable business type and item can limit the opportunity of selection for consumers who have up to now used those products and can cause a negative effect that reduces consumer welfare. Also, because there is the possibility that the range of consumer selection may be reduced when a few small to medium size businesses monopolize the market, by causing reverse discrimination between these businesses, the role of determining the utility of products must be left ot the consumer not the government. Lastly, it is desirable that this is carried out with the supplementation of deficient parts in the future, because fair trade is already secured with the enforcement of the franchise trade law and the best trade standard of the Fair Trade Commission. Overlapping regulations by the suitable business type designation is an excessive restriction in the franchise industry. Now, it is necessary to establish in the domestic franchise industry an environment where a global franchise corporation, which spreads Korean culture around the world, is capable of growing, and the active support by the government is needed. Therefore, systems that do not consider the process or background of the growth of franchise businesses and harm these businesses for the sole reason of them being large corporations must be removed. The inhibition of growth to franchise enterprises may decrease the sales of franchise stores, in some cases even bankrupt them, as well as cause other problems. Therefore the suitable business type system should not hinder large corporations, and as both small dealers and small to medium size businesses both aim at improving competitiveness and combined growth, large corporations, small dealers and small to medium sized businesses, based on their mutual cooperation, should not include franchise corporations that continue business relations with them in this system.

• Korean Security Journal
• /
• no.11
• /
• pp.159-181
• /
• 2006

This study is concerned on Why The Certified Security certification is needed and How to control the security quality to get better service to the clients. Theses days are required The Certified Certificate in all the industry. And in this point of view, the certified certificate is a kind of confirmation by an authority to the person who has how much special knowledge and practice in a certain field. Moreover, in the functionalism society the certified certificate system would be very positive effect to the related industry and society as official measurement by an authority. The security is freedom from fear and anxiety. Which means the security can not be operated in isolation from citizen's safe-living expectation, and which is also dealing with valuable human being's life. For getting the better purpose the security industry employees should have more organized special training and education. As my understanding the certified certificate exam system is the confirmation by an authority, the certified certificate is only neutral evidence to get the confidence and credit from the clients. In this point of view the core point is How to control The Certified Certificate by a credied authority.

• Clean Technology
• /
• v.26 no.2
• /
• pp.151-157
• /
• 2020

Rapid urbanization has elevated the risk of urban flooding due to the increase in the impervious surface, causing environmental disasters and environmental pollution problems, such as lowering the groundwater level and increasing water pollution. In Korea, low impact development (LID) techniques have been introduced to minimize these environmental impacts and maintain the water cycle soundness. However, most small-scale development projects are in blind spots because there is no legal basis for rainfall runoff management. Small-scale development projects that increase the surface runoff of rainwater are required to mandate the application of LID facilities in accordance with the polluters' responsibility principle. Therefore, it is necessary to implement a preliminary consultation system for water cycle recovery. This study focuses on the cost-benefit analysis on the application of LID techniques for small-scale development projects. The scale of nationwide small-scale development projects used for cost-benefit analysis were defined as buildings with a land area of more than 1,000 ㎡ or a total floor area of 1,500 ㎡. As a result of analyzing the cost-benefits from the installation of LID facilities, they were found to be much lower than the economic standard value of 1. This might be due to the high cost of facilities compared to the scale of the project. However, considering the overall environmental value of improving the water environment and air quality by the installation of LID facilities and the publicity of reducing the operating cost of sewage treatment facilities, the introduction of a prior consultation for small-scale development projects is inevitable. In the future, institutional and financial support from local governments is required to improve the cost-benefits with the introduction of a prior consultation for small-scale development projects.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.1
• /
• pp.164-183
• /
• 2021

This article examines how the production technology of the Chinese bronze mirror affected the Korean Peninsula and Japan. To that end, we looked at how the drawing of linked-arc designs in bronze mirrors was done. The drawing technique is classified into three methods: Type 1 and type 2 were confirmed to have been used in China, but type 3 was used not in China, but on the Korean Peninsula and in Japan. Type 1 and type 2 are basically the same, with an identical restored diameter of the linked-arc design, and type 2 is found elsewhere in the bronze mirror, and type 1 are not. Type 3 features different diameters, and the linked-arc design does not form a complete circle. This shows that the manufacturer of the bronze mirror did not use several bumpy compasses, but rather a single one with a fixed center and protrusion, rather than one that can be easily adjusted, as it is today. That is why, of course, a pair of compasses must have been used several times. In this regard, those who produced bronze mirrors on the Korean Peninsula in the early days understood not only the Chinese techniques of the linked-arc design, but also the meaning contained within them. On the other hand, the makers of bronze mirrors in Japan did not understand the patterns and simply imitated them. From the late Yayoi period, Japan understood and produced works with the principle of drawing the linked-arc design. As a representative example, bronze mirrors excavated from the tomb of Hirabaru can be referenced. Perhaps it can be assumed that, behind these works, there was a direct transfer of technology, such as the migration of the makers of bronze mirror makers like the Do family (陶氏), whose names were found written on bronze mirrors excavated from the Hirabaru tomb.

• Journal of the Korea Convergence Society
• /
• v.9 no.5
• /
• pp.21-26
• /
• 2018

In this study, HRD-NET (http://hrd.go.kr), a vocational and training integrated computer network operated by the Ministry of Employment and Labor, is used to confirm whether job training information required by job seekers is being provided smoothly The question bulletin board was extracted using 'R' program which is optimized for big data technique. Therefore, the effectiveness, appropriateness, visualization, frequency analysis and association analysis of the vocational training system were conducted through this, The results of the study are as follows. First, the issue of vocational training card, video viewing, certificate issue, registration error, Second, management and processing procedures of learning cards for tomorrow 's learning cards are complicated and difficult. In addition, it was analyzed that the training cost system and the refund structure differentiated according to the training occupation, the process, and the training institution in the course of the training. Based on this paper, we will study not only the training system of the Ministry of Employment and Labor but also the improvement of the various training computer system of the government department through the analysis of big data.

• Korean Security Journal
• /
• no.44
• /
• pp.7-35
• /
• 2015

The objective of this article is to inform and document the contemporary development of the private security industry in Queensland Australia, a premier holiday destination that provide entertainment for the larger region. The purpose of this review is to examine the comtemporary development of mandated licensing regimes regulating the industry, and the necessary reform agenda. The overall aim is threefold: first, to chart the main outcomes of the two-wave of reforms since the mid-'90s; second, to examine the effectiveness of changes in modes of regulation; and third, to identify the criteria that can be considered a best practice based on Button(2012) and Prenzler and Sarre's(2014) criteria. The survey of the Queensland regulatory regime has demonstrated that, despite the federal-guided reforms, there remain key areas where further initiatives remain pending, markedly case-by-case utilisation of more proactive strategies such as on-site alcohol/drug testing, psychological evaluations, and checks on close associates; lack of binding training arrangement for technical services providers; and targeted auditing of licensed premises and the vicinity of venues by the Office of Fair Trading, a licensing authority. The study has highlighted the need for more determined responses and active engagements in these priority areas. This study of the development of the licensing regimes in Queensland Australia provides useful insights for other jurisdictions including South Korea on how to better manage licensing system, including the measures required to assure an adequate level of professional competence in the industry. It should be noted that implementing a consistency in delivery mode and assessment in training was the strategic imperative for the Australian authority to intervene in the industry as part of stimulating police-private partnerships. Of particular note, competency elements have conventionally been given a low priority in South Korea, as exemplified through the lack of government-sponsored certificate; this is an area South Korean policymakers must assume an active role in implementing accredited scheme, via consulting transnational templates, including Australian qualifications framework.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.108-109
• /
• 2023

The purpose of this study is to set a policy that can be specifically promoted according to the recently announced domestic equipment industry fostering strategy, and to suggest a plan that can be implemented. As a plan to foster the equipment industry, a new technology certification system and a new technology test and verification area operation and vitalization plan were set as alternatives. And a survey was conducted on companies conducting R&D to derive specific demand and introduction plans. As a result of the survey, it was found that there was a high demand for the use of new technology certification systems and testing and verification area. Also demonstration in connection with port equipment, testing and evaluation in connection with accredited verification agency, and preparation of dedicated agencies were derived to foster the equipment industry. Based on this, this study suggests a new technology certification system specialized for port equipment was established and a plan to institutionalize. In addition, in connection with the survey results and certification system, the basic functions and roles of the new technology testing and verification area was established. For future activation, incentives with effective certificates such as exemption of certification costs and issuance of performance confirmation certificates are needed, and efficient operation and management through dedicated organization and certification center were suggested.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.3
• /
• pp.95-126
• /
• 2020

In 2017, the world's first WIG ship (WIG: Wing In-Ground) pilot's license written test was conducted in Korea. The WIG ship is a ship that combines the characteristics of ships and airplanes. Therefore, the pilot of the WIG ship was allowed to apply only for those who had the aircraft pilot's license and the 6th class marine nautical license. The WIG ship pilot's license system was first introduced by Korea, so there are no international standards for the license system, and the introduction of a domestic qualification system also requires institutional arrangements due to various restrictions such as pilot training. However, in order to become a valuable industry as a future growth engine for the ocean, several urgent problems need to be solved, and that is the training of manpower for WIG ships. Therefore, I reviewed the institutional issues related to pilot training as this subject. Since 2001, various countries around the world have been discussing this issue, centering on IMO, and Korea has continued to participate and cooperate in IMO meetings. And the national qualification test for surface flying ships was conducted in Korea from 2011. However, there are still problems to be solved, and I pointed out the advancement of the manpower training system, the education and training system, and the designated national educational institution system. As a solution to this, it was suggested through the improvement of the license system and the operation of designated educational institutions. Among these solutions, I believe that the best way is to entrust the operation of designated national educational institutions to private educational institutions. However, I propose a plan that the government entrusts to private educational institutions, but the government is responsible for licensing and supervision. WIG ship will be a new market for the aviation industry and aviation workers.