• 제목/요약/키워드: 공력분석

검색결과 305건 처리시간 0.023초

The Study of Airfoil Aerodynamic Characteristics in Backflow Field (후류의 영향을 받는 익형의 공력 특성 연구)

  • Lee, Sang-U;Baek, Jin-Sol
    • Proceeding of EDISON Challenge
    • /
    • 제4회(2015년)
    • /
    • pp.627-631
    • /
    • 2015
  • 유동 교란에 의하여 균일유동이 아닌 자유류가 항공기 날개 표면을 지나면 공력 계수들이 균일 자유류 유동과는 달라진다. 예를 들어, 항공기들의 편대 비행에서 앞의 항공기가 생성한 후류가 뒷 항공기에 영향을 주고, 두 개의 주익을 가지는 Tandem Wing 항공기의 경우 첫 번째 주익에서 발생된 후류가 두 번째 주익의 공력에 영향을 미친다. 본 연구는 NACA0012 익형의 앞쪽에 또 다른 익형을 배치하여 앞 쪽의 익형에서 발생한 후류가 뒤의 익형에 미치는 영향을 익형 사이의 거리에 따라 분석하였다. 앞쪽의 익형에서 발생한 압력계수와 뒤쪽에서 발생한 압력계수의 비교를 통해 후류의 효과가 어떤 영향을 끼치는지 확인 하였고, 두 익형 사이의 거리가 2c일 때 후류의 영향이 거의 없음을 확인 하였다.

  • PDF

A Study on Aerodynamic Characteristics of Airfoil for Human Powered Aircraft (인간동력 항공기용 에어포일의 공력특성 연구)

  • Park, Jun-Yong;Im, Je-Yeon;Yeo, Seong-Yun;Yu, Gi-Wan
    • Proceeding of EDISON Challenge
    • /
    • 제2회(2013년)
    • /
    • pp.331-336
    • /
    • 2013
  • 본 연구에서는 인간동력 항공기의 주익에 적용할 에어포일 형상에 대한 공력 특성을 파악하였다. 인간동력 항공기 날개에 적용하기에 적절한 에어포일을 조사하였으며, DAE11, DAE21, DAE31, SG6043 익형에 대하여 전산유체해석 프로그램인 EDISON_CFD를 통하여 비교하였다. 인간동력 항공기의 낮은 비행속도를 감안하여 $6{\times}10^5$의 저 레이놀즈수에서 받음각에 따른 양력계수, 항력계수, 양항비 등을 얻어내어 상호 비교 분석하였다. 본 연구를 통해 인간동력 항공기 주익에 적용할 저 레이놀즈 에어포일 형상을 최종적으로 선택할 수 있는 근거 자료를 확보하였다.

  • PDF

The Analysis of Aerodynamic Characteristics for Busemann Biplane with Flap (Flap을 장착한 Busemann Biplane의 공력 특성 연구)

  • Tae, Myeong-Sik;Jeon, Seong-Hun;O, Se-Jong
    • Proceeding of EDISON Challenge
    • /
    • 제2회(2013년)
    • /
    • pp.299-304
    • /
    • 2013
  • 초음속 조건에서 Busemann biplane은 충격파의 중첩에 의해 항력 감소가 일어난다. 그러나 받음각이 증가 할 경우, 앞전에서 궁형 충격파가 발생하여 항력이 급격하게 증가한다. 이에 본 연구에서는 busemann biplane에 플랩을 주어 궁형 충격파를 감소시킬 수 있는 flap biplane의 플랩 길이와 각도의 변화에 따른 공력 성능의 변화를 분석하였다. Flap biplane의 공력성능을 기본 biplane형상 및 diamond airfoil과 비교한 결과, 동일한 양력 조건에서 항력은 diamond airfoil에 비해 약 75%정도 감소함을 확인하였다. 그리고 플랩의 길이와 양항비는 선형의 관계가 있음을 확인하였고, 특정한 플랩의 각도에서 최대 양항비가 도출된다는 사실을 확인하였다. 마지막으로 전압력의 감소를 충격파의 강도로 정의하고, 이를 비교한 결과 flap biplane의 전압력 감소가 diamond airfoil에 비해 약 25%정도가 더 작게 나타난 사실로 부터 flap biplane의 소음 감소 효과를 유추할 수 있었다. flap biplane은 초음속 영역에서 항력과 소음의 감소에 효율적인 익형임을 확인하였다.

  • PDF

2D 플라잉 디스크의 피칭 운동에 따른 비정상 유동 해석

  • Park, Da-Un;Kim, Tae-Uk
    • Proceeding of EDISON Challenge
    • /
    • 제5회(2016년)
    • /
    • pp.566-570
    • /
    • 2016
  • 본 연구에서는 플라잉 디스크를 이용하여 Pitching 운동 조건에서의 공력특성을 해석하였다. 본 해석에서 사용한 플라잉 디스크 모델은 프리원 151_140이며, 해석자로는 KFLOW_EDISON_2D_3DOF를 사용하였다. Pitching 운동이 있는 경우 받음각의 변화에 따른 공력특성을 비교 분석하였다. 기준 받음각의 변화에 따라 형상 아랫면과 뒷전 부근에 실속 와류가 다른 형태로 생겨 플라잉 디스크의 공력 특성에 영향을 준다는 것을 확인하였다. 또한, 기준 받음각이 증가 할수록 강한 실속 와류가 발생함을 알 수 있다.

  • PDF

Effect of Bore an Aerodynamic Loads in Modulatable Thrust Devices (노즐목 가변 추력기에서 Bore가 구동기의 공력하중에 미치는 영향)

  • Wang, Seung-Won;Huh, Hwan-Il
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 한국추진공학회 2011년도 제36회 춘계학술대회논문집
    • /
    • pp.189-192
    • /
    • 2011
  • In solid rockets, a pintle thruster is a modulatable thrust device which controlls nozzle throat area. In this study, effect of bore on aerodynamic loads in a SNECMA modulatable thruster was carried out. Existence of bore resulted in reduced aerodynamic load.

  • PDF

자기부상열차의 공력 특성에 관한 수치 연구

  • Won, Seong-Sik;U, Dae-Cheon
    • Proceeding of EDISON Challenge
    • /
    • 제6회(2016년)
    • /
    • pp.55-57
    • /
    • 2016
  • 본 연구에서는 초고속 자기부상열차의 단면도를 통하여 2-D형상을 모델링하고 이를 기반으로 항력과 유동 특성에 대한 분석을 수행하였다. 유동의 마하수가 0.3 이상임을 고려하여 압축성 모델이 사용되었고, 난류모델은 Menter's k-w SST(Shear Stress Transport)모델을 적용시켰다. 2-D 해석과 자기부상열차의 특성상 열차가 공기중에서 주행하고 있는 것으로 가정하고 공력 특성을 해석하였다.

  • PDF

On the Effect of Air-Simulated Side-Jets on the Aerodynamic Characteristics of a Missile by Multi-Fidelity Modeling (다충실도 모형화를 통한 공기로 모사된 측방제트가 유도무기의 공력특성에 미치는 영향 연구)

  • Kang, Shinseong;Kang, Dayoung;Lee, Kyunghoon
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • 제49권2호
    • /
    • pp.95-106
    • /
    • 2021
  • Side-jets enable the immediate maneuver of a missile compared to control surfaces; however, they may cause adverse effects on aerodynamic coefficients, for they interfere with freestream. To find out the impact of side-jets on aerodynamic coefficients, we simulate side-jets as air gas and utilize multi-fidelity models to evaluate differences between aerodynamic coefficients obtained with and without side-jets. We computed differences in aerodynamic coefficients to investigate side-jet effects for the changes of a Mach number, a bank angle, and an angle of attack. As a result, asymmetrically developed side-jets affect the longitudinal force and moment coefficients, and the lateral force and moment coefficients drastically change in-between -30 and 30 degrees of bank angles. In contrast, side-jets hardly influence the axial force coefficients. As for the axial moment coefficient, we could not determine the side-jet effect due to a lack of aerodynamic coefficient samples in the Mach number. All in all, we confirm that side-jets lead to the change of a missile attitude as they considerably vary the longitudinal and lateral aerodynamic coefficients.

Experimental Investigation of Noise Generation from the Inter-coach Spacing of a High-speed Train (고속열차의 차간 공간에서 발생하는 소음 특성의 시험적 규명)

  • Choi, Sung-Hoon;Park, Choon-Soo;Park, Jun-Hong;Kim, Sang-Soo
    • Journal of the Korean Society for Railway
    • /
    • 제10권6호
    • /
    • pp.786-791
    • /
    • 2007
  • Aerodynamically generated noise is dominant when the train speed approaches 300km/h. This noise sources is caused by the turbulent flow separations or vortex shedding from the train structure. Experiments were performed to investigate the characteristics of aerodynamic noise sources generated from exterior of the KTX trains and HSR-350x, especially from the inter-coach spacing. Measurements of both the inside and outside of the cabin are carried out to investigate the characteristics of the noise. Effect of the size of the mud-flap has been investigated through an wind tunnel test and it has been found that the low frequency noise is strongly dependent on the size of the gap. Also performed is an array measurement to locate different noise sources from the high-speed train. spectral characteristics of exterior noise sources are examined.

The Study of Advanced Propeller Blade for Next Generation Turboprop Aircraft -Part I. Aerodynamic Design and Analysis (차세대 터보프롭 항공기용 최신 프로펠러 블레이드 연구 -Part I. 공력 설계 및 해석)

  • Choi, Won
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • 제40권12호
    • /
    • pp.1017-1024
    • /
    • 2012
  • The aerodynamic design and analysis on advanced propeller with blade sweep was performed for recent turboprop aircraft. HS1 airfoil series are selected as a advanced propeller blade airfoil. Adkins method is used for aerodynamic design and performance analysis with respect to the design point. Adkins method is based on the vortex-blade element theory which design the propeller to satisfy the condition for minimum energy loss. Propeller geometry is generated by varying chord length and pitch angle at design point of target aircraft. Advanced propeller is designed by apply the modified chord length, the tip sweep which is based on the geometry of conventional propeller. The aerodynamic characteristics of the designed Advanced propeller were verified by CFD(Computational Fluid Dynamic) and evaluated to be properly designed.

An Optimal Aerodynamic and RCS Design of a Cruise Missile (공력 및 RCS 해석 기반의 순항 유도탄 최적설계)

  • Yang, Byeong-Ju;Song, Dong-Gun;Kang, Yong-Seong;Jo, Je-Hyeon;Je, Sang-Eon;Kim, Byeong-Kwan;Myong, Rho-Shin
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • 제47권7호
    • /
    • pp.479-488
    • /
    • 2019
  • A cruise missile uses wings and a jet engine like an airplane to reach the target after cruising a considerable distance. An integrated design of a cruise missile based on radar cross section (RCS) reduction and enhanced aerodynamic performance is indispensable, since it must be able to fly long-distance at subsonic speed without being detected by enemy radar. In this study, we designed a Taurus-type cruise missile and analyzed its RCS and aerodynamic characteristics using the physical optics (PO) technique and the Navier-Stokes CFD code. As a result, we obtained the optimal shape of cruise missile with improved aerodynamic performance and reduced RCS.