• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.1
• /
• pp.97-103
• /
• 2003

Numerical research has been done for the transverse jet behind a rearward-facings step in turbulent supersonic flow without chemical reaction. Purpose of transverse jet is to enhance mixing of the fuel in the combustor. Two-dimensional unsteady flowfields generated by slot injection into supersonic flow are numerically simulated with the Navier-Stokes equations with two-equation k-$\varepsilon$ turbulence model. Numerical method is used high-order upwind TVD scheme. Eight cases are computed for different slot momentum flux ratios and slot position at downstream of the step. The flow is very similar to the cavity flow, because the jet acts as an obstacle. The numerical results thus show the periodic phenomenon.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.4
• /
• pp.298-307
• /
• 2019

The evolution of the cavity and the variation of the drag for an underwater body with control fins are investigated through a numerical analysis of the steady cavitating turbulent flow. The continuity and the steady-state RANS equations are numerically solved using a mixture fluid model for calculating the multiphase turbulent flow of air, water and vapor together with the SST $k-{\omega}$ turbulence model. The method of volume of fluid is applied by the use of the Sauer's cavitation model. Numerical solutions have been obtained for the cavity flow about an underwater body shaped like the Russian high-speed torpedo, Shkval. Results are presented for the cavity shape and the drag of the body under the influence of the gravity and the free surface. The evolution of the cavity with the body speed is discussed and the calculated cavity shapes are compared with the photographs of the cavity taken from an underwater launch experiment. Also the variation of the drag for a wide range of the body speed is investigated and analyzed in details.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.2
• /
• pp.125-132
• /
• 2021

In this paper, We propose a study on the construction of an environment for collaboration in mixed reality and a method for working with wearable IoT devices. Mixed reality is a mixed form of virtual reality and augmented reality. We can view objects in the real and virtual world at the same time. And unlike VR, MR HMD does not occur the motion sickness. It is using a wireless and attracting attention as a technology to be applied in industrial fields. Myo wearable device is a device that enables arm rotation tracking and hand gesture recognition by using a triaxial sensor, an EMG sensor, and an acceleration sensor. Although various studies related to MR are being progressed, discussions on developing an environment in which multiple people can participate in mixed reality and manipulating virtual objects with their own hands are insufficient. In this paper, We propose a method of constructing an environment where collaboration is possible and an interaction method for smooth interaction in order to apply mixed reality in real industrial fields. As a result, two people could participate in the mixed reality environment at the same time to share a unified object for the object, and created an environment where each person could interact with the Myo wearable interface equipment.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.525-534
• /
• 2022

The supply of housing can be understood through a close relationship with the urbanization phenomenon. Through industrialization and urbanization, many cities have implemented systems and policies for housing supply due to population concentration in cities, poor housing quality, and lack of housing. In the case of the Netherlands, the Housing Act was enacted in 1901 to improve the residential environment during the period when the population was concentrated in the city, and various efforts were made to expand the housing supply. Through this process, we understand the background of collective housing types in the Netherlands and analyze the application stages of contemporary residential housing planning in Rotterdam and Amsterdam. On the other hand, through the experience of Western society, we examine how to view the problem of multi-family housing types in our society, where the proportion of apartments is continuously increasing.

• Tribology and Lubricants
• /
• v.39 no.4
• /
• pp.139-147
• /
• 2023

Cavitation phenomena observed during the operation of a submerged plain journal bearing (PJB) can affect bearing performance parameters such as dynamic coefficients, whirl frequency ratio, and critical mass. This study presents numerical solutions of the Reynolds equation for steadily and dynamically loaded submerged PJBs with half-Sommerfeld (HS), Reynolds, and Jakobsson-Floberg-Olsson (JFO) cavitation models when the supply pressure is larger or equal to the cavitation pressure. The loads at various eccentricity ratios are identical; however, the attitude angle is approximately 6% smaller when the eccentricity ratio is between 0.2 and 0.7 and the JFO model is used, compared to that when the Reynolds model is used. Dynamic coefficients obtained with the HS and Reynolds model show good agreement with each other, except for k_xz, which is sensitive to changes in the force normal to the rotor weight, and is attributed to the difference in the attitude angle obtained with each cavitation model. Stiffness coefficients are determined using the pressure distribution in the film, and therefore, when the JFO model is used, the direct stiffness coefficients are affected and show opposite signs for most eccentricity ratios. The mass-conservative JFO model can predict at least a 30% smaller critical mass compared to that using the HS and Reynolds models. Thus, the instability analysis results can change based on the cavitation model used in a submerged PJB. The results of this research indicate that the JFO model should be used when designing a rotor system supported by submerged PJBs.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.495-502
• /
• 2023

If traditional Korean villages or residential districts have formed a community on the ground of coexisting with nature, there is a different historical development process in which many European cities have created residences for multi households on the basis of roads and blocks in fortresses. Along with the modernization of society together with large-scale housing supply, the urban landscape of series of large apartment complexes has become universal views of our urban structure; thus, the viewpoint that small and medium-sized block-based collective housing, which are more common urban structures in European cities can be linked to the improvement of urbanity and neighborship is examined. Through the process, the possibility of expanding collective housing supply based on small and medium-sized blocks as an alternative method other than complex-type apartments based on superblock, I would like to make meaningful in terms of how we can change the fundamental mutual relationship with our lifestyle and the tangible change of collective housing types which has large impact on our lives.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.1
• /
• pp.10-20
• /
• 2014

To study the water-entry impact noise, on-board experiment using a small launcher firing various objects was performed in the Yellow Sea. As the launcher fires a cylindrical object from the ship vertically, generated noise is measured with a hydrophone on the starboard of Chung-hae, Marine surveyor. Three types of cylindrical objects, which have noses of flat-faced, conical, and hemisphere, were used during the experiment. The measured noise exhibits a time-dependency which can be divided into three phases: (1) initial impact phase, (2) open cavity flow phase, (3) cavity collapse and bubble oscillation phase. In most cases, the waveform of bubble oscillation phase is dominant rather than that of initial impact phase. Pinch-off time, where a cavity begins to collapse, occurs at 0.18 ~ 0.2 second and the average lasting time of bubble was 0.9 ~ 1.3 second. The energy of water-entry impact noise is focused in the frequency region lower than 100 Hz, and the generated noise is influenced by the nose shapes, object mass, and launching velocity. As a result, energy spectral density on the bubble frequency is higher in the order of flat-faced, conical, hemisphere nose, and the increase of initial energy raises the energy spectral density on the bubble frequency in the cylinder body of same shape. Finally, we compare the measurements with the simulated signals and spectrum based on the bubble explosion physics, and obtain satisfactory agreements between them.

• Journal of the Korean Ceramic Society
• /
• v.41 no.8
• /
• pp.618-622
• /
• 2004

Excitation spectra of the 1.6 rm emission originating from $Ho^{3＋}$：$^{5}$ I$_{5}$ \longrightarrow$^{5}$ I$_{7}$ transition in fluoride, sulfide, and selenide glasses were measured at wavelengths around 900nm where the fluorescing $^{5}$ I$_{5}$ level is located. In specific energy range where the frequency upconversion populating $^{5}$ F$_{1}$ state happens, the excitation efficiency of the 1.6 fm emission was deteriorated in fluoride and sulfide hosts. In selenide however spectral line shapes of the excitation spectrum and the '$^{5}$ I$_{8}$ \longrightarrow$^{5}$ I$_{5}$ absorption spectrum looked seemingly identical to each other. Differences in optical nonlinearity as well as electronic band gap energy of the host glasses used are responsible for the experimental observations. On the other hand, codoping of rare earths such as Tb$^{3+}$, Dy$^{3+}$, Eu$^{3+}$, and Nd$^{3+}$ was effective in decreasint the terminating $^{5}$ I$_{7}$ level lifetime. However, at the same time, some of the codopants increased unnecessary absorption at the 1.6 $\mu$m wavelengths via their ground state absorption. Though the lifetime quenching effect of Eu$^{3+}$ was moderate, it exhibited no additional extrinsic absorption at the 1.6 $\mu$m band.EX>m band.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.1
• /
• pp.119-129
• /
• 2018

Companies' efforts to secure and sustain a competitive advantage in the market may also appear in the form of new product development. This has increased the importance of leveraging knowledge from other companies in a global competition that is accelerating with an accelerating product life cycle and the development of transportation and communications. In order to create valuable knowledge through the exchange and combination of knowledge, the absorptive capacity of the recipient of the knowledge should be considered as important, but also the knowledge protection tendency, which is characteristic of the knowledge transferor, should be considered. However, studies that considered these factors at the same time were very limited. This study examines the effect of suppliers 'absorptive capacity and buyer' s knowledge protection on new product development performance during the joint development of new products. In addition, we investigated the interaction effect between supplier's absorption capacity and buyer's knowledge protection tendency. For this purpose, data were collected for automobile industry, electronics industry and defense industry, where joint development of new products occurred frequently, and statistical verification was performed by regression analysis. The results showed that the absorptive capacity of the supplier was positively correlated with the performance of the new product development, and the buyer 's knowledge protection tendency had a negative relationship with the new product development performance. In addition, the absorptive capacity of the supplier and the buyer 's knowledge protection tendency have an interaction effect on the new product development result. These results suggest that suppliers' absorption capacity is an important factor in the joint development of new products, but suppliers with superior absorption capacity may have a negative impact on new product development performance if buyers have a negative attitude toward knowledge transfer.

• Proceedings of the Korean Society for Information Management Conference
• /
• 2017.08a
• /
• pp.103-103
• /
• 2017

생태학 분야에서는 생물의 분포, 변동, 서식환경요인의 변화, 등의 여러 종류의 데이터들이 수집되고 있는데 데이터의 형태가 다양하여 데이터의 관리와 활용형태도 다양하게 나타나고 있다. 근래에 들어 각 종 측정기기들이 개발되면서 생태조사 분야에서도 데이터의 양이 급증하는 시점에 있다. 수생태계 분야에서도 전통적인 생물상조사의 데이터는 크게 증가하지 않고 있지만 자동측정센서가 개발된 항목의 경우에는 데이터가 급증하는 단계에 있다. 수생태계에서 흔히 조사되는 플랑크톤의 군집구조 자료를 보면 하나의 조사대상 시료에서 출현하는 종의 수가 50 종정도에 이르며 각 개체의 종을 육안으로 확인하고 있으므로 종조성조사는 아직 자동화가 어렵다. 그러므로 플랑크톤 자료의 특성은 조사의 시료수(case)는 적고 측정항목(변수 variable)이 많은 특성을 가진다. 반면에 센서가 개발된 수질과 관련된 항목들은 자동측정설비가 확대되고 있어 변수는 적지만 장기간의 time series 들이 수집되고 있다. 녹조현상이 관심을 끌면서 여러 곳에 식물플랑크톤의 양을 측정하는 chlorophyll 센서가 설치되고 있는 것이 대표적인 사례이다. 그 외에 정량화되지 못하는 정성적 자료들도 수집되고 있으며 자료수집방법의 표준화도 미흡한 예가 많이 있고, 자료의 형태가 다양하여 데이터의 관리와 활용을 어렵게 한다. 환경부는 전국의 주요 하천 지점에서 정기적으로 수질을 측정하여 공개하고 있으며, 일부 지점에는 자동수질측정시설을 설치하여 측정의 빈도를 높이고 있다. 하천이나 호수에서 센서를 이용한 고빈도 모니터링은 그 동안 인지하지 못하였던 단기적 생태계 변화에 대해 새로운 정보를 제공하여 연구의 장르를 넓혀 가고 있다. 도시하천에서 산소를 측정한 사례를 보면 강우 시에 일시적으로 산소가 고갈되는 현상이 관찰되며, 부영양한 호수와 하천에서는 주야간 산소의 급격한 변동이 생태계 스트레스 요인으로 작용하고 있음을 알 수 있었다. 식물플랑크톤 센서의 연구에 의해 단기적인 변동이 크게 나타나고 있음이 새로이 밝혀지기도 하였다. 데이터의 수집과 활용도를 높이려는 노력도 이루어지고 있다. 과거에는 개인단위로 이루어지던 연구가 이제는 데이터를 수집하고 공유하는 플랫폼이 만들어 지면서 공동연구가 확대되고 있고, 국제적으로 지역을 초월하는 공동연구도 가능하게 되었다. 국제호수관측망학회(Global Lake Ecological Observatory Network, GLEON)이 그 사례이며 세계 여러 나라의 학자들이 참여하여 국제적으로 데이터를 공유하고 공동연구를 촉진하는 역할을 하고 있다. 생태계데이터의 증가는 생태학자들의 연구역량을 초과하는 데이터의 관리와 활용의 능력을 요구할 것이며 환경 생태 IT 분야의 융합연구의 필요성이 크게 대두되고 있다. 그간 데이터베이스의 구축에는 일부 성과가 있었으나 아직 수집된 데이터의 활용도를 높이고 타분야와의 협력연구 시너지를 확대하려는 노력은 부족하다. 이제는 데이터의 수집과 저장뿐 아니라 데이터의 활용도를 높일 수 있도록 학제적 협력연구를 촉진하는 off-line 모임도 확대할 때이다.