• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.285-285
• /
• 2004

본 논문에서는 유연 공구 홀더를 가진 다관절 매니퓰레이터 로봇을 이용한 디버링 시스템에 대한 연구를 수행하였다. 로봇을 이용한 디버링 작업에서 버 공구(Rotary file)의 강성과 로봇의 강성으로 인해 작업 시 발생할 수 있는 각종 오류를 방지할 수 있는 소형의 3자유도 유연 공구 홀더(Flexible Tool Holder)를 개발하여 이에 대한 분석을 하였다. 개발한 유연 홀더를 새로운 구조의 다관절 로봇 매니퓰레이터를 이용하여 디버링 시험을 수행하였다.(중략)

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.153-157
• /
• 2002

본 연구에서는 선반가공에서 일반적인 선반작업 후 밀링이나 드릴링 가공이 가능한 복합가공기의 역할을 한번에 수행할 수 있는 CNC 공구터렛의 홀더 주축에 대한 수학적 모델링을 통하여 시스템의 횡진동 및 비틀림 진동 해석으로 발생할 수 있는 진동 문제에 대처할 수 있는 방안을 제시 하고자 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.363-366
• /
• 2003

The hard turning is a turning operation performed in high strength alloy steels (HRC>30) in order to reach surface roughness close to those obtained in grinding. This is possible because of availability of improved tool materials (polycrystalline cubic boron nitride. PCBN), ad more rigid machine tools. According to many previous work of hard turning mechanism, the maximum temperature of cutting can be raised up to 100$0^{\circ}C$. As the heat generation rate is very high, the thermal displacement of tool holder cannot be negligible. Therefore, the aim of this paper is to analyze effects of high heat generation at CBN tool tip to the thermal displacement of a tool holder in hard turning and finally geometric accuracy. The thermal behavior of a CBN tool holder is investigated by numerical simulation and experiment, and the result shows thermal elongation of microns order is possible during hard turning process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.163-164
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.788-791
• /
• 2004

This paper presents a general description of single and dual contact tooling systems, finite element analysis, and discussions on the application of the system to the 5-head router machine which is in particular for aerospace components. This study has been performed as part of the development of the new generation 5-head router machine which is designed for high productivity. Such high productivity in essence requires high speed rotation and multiple spindles in one machine. The high speed rotation may exceed a range in a conventional single contact tooling system. The conventional tooling system is reevaluated in comparison with the dual-contact system. Finite element analysis using simplified spindle models compares major differences in the two systems. Some problems in the application to the 5-head router machine are discussed.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.110-112
• /
• 2003

본 논문에서는 상용 CAD시스템을 이용하여 공구 및 인서트를 모델링하고, 절삭이론 및 유한요소법을 사용하여 인서트의 온도분포를 계산하였다. 절삭이론을 이용하여 절삭실험 없이 인서트 끝단의 온도를 계산하고, 이를 하중 조건으로 사용하여 공구의 온도분포를 얻을 수 있었다. 또한 공구 홀더 끝 부분의 여러 가지 온도 경계조건에 대하여, 공구 및 인서트의 온도분포가 계산되었다. 다양한 경계조건에 따른 인서트의 온도분포에 대한 지식은 공구설계 및 가공조건 설정시 유용하게 이용될 수 있으며 특히 어떠한 절삭실험 얼이 계산이 가능하므로 가공공정설계시 효과적으로 이용될 수 있다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.5
• /
• pp.9-16
• /
• 2001

Turning experiments are conducted to investigate characteristics of acoustic emission due to wear of the coated tool. The AE signals are obtained with a sensor attached to tool holder side. Tool states are identified with scanning electron microscopy and optical microscopy. It is demonstrated that the AE signals provide reliable informations about the cutting processes and tool states. Moreover, tool wear can be detected successfully using the AE-RMS.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.889-894
• /
• 2010

Conventional shrink-fit tool holders have positive features, such as high accuracy, high strength, high stiffness and low sensitivity to centrifugal forces, but they require heavy investments for heating and cooling equipment. Generally the heating equipment has to heat the tool holder up to $200{\sim}300^{\circ}C$ for tool changes. This paper introduces a novel shrink-fit tool holder that is able to unclamp a tool at $40{\sim}50^{\circ}C$. This feature makes it possible to switch between the clamped and unclamped states by using a simple device, which has lower power, smaller size and lower cost than the heating equipment of the conventional shrink-fit tool holders. The proposed shrink-fit tool holder is able to expand its tool hole by using the shape memory alloys which are integrated in the tool holder body. Performances of the SMA shrink-fit tool holder were evaluated experimentally. The experimental results confirm that the proposed tool holder is feasible in aspects of clamping/unclamping operations, clamping force and repeatability of tool setup.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.7
• /
• pp.1095-1102
• /
• 2003

The most important thing in measuring the tool wear is to set up the measurement base. The end mill that is being used for machining of die is difficult to set up the base and to measure the tool wear because of geometric properties of that such as a helix and relief angle. In this study, a new instrument using spindle orientation function in end milling is developed to measure the tool wear and evaluated by the measuring system on the machine. Finally, this new method makes possible the wear measurement of same position and reduces the measuring time compared with the measuring methods such as the microscope and CCD.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.149-153
• /
• 2003

The most important thing in measuring the tool wear is to set up the measurement base. The end mill that is being used for machining is difficult to set up the base and to measure the tool wear because of geometric properties of that such as a helix and relief angle. In this study, a new instrument using spindle orientation function in end milling is developed to measure tool wear and evaluated by measuring system on the machine. Finally, this new method makes possible the wear measurement of same position and reduces measuring time compared with measuring methods such as the microscope and CCD.