• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.225-229
• /
• 2005

이류모형을 이용한 단기예측 레이더 강우자료와 관측 레이더자료의 비교를 통하여 얻어진 예측오차를 분석하였다. 임의 시점까지의 예측오차 장에 나타나는 확률분포 형태와 공간적 상관성을 분석하여 이들 특성을 반영하는 추후의 예측오차 장을 모의할 수 있었다. 모의된 예측오차 장과 합성된 단기예측 강우 장은 이류모형을 이용한 예측에 따른 불확실성 을 추계학적으로 반영한 예측강우를 제공한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1721-1725
• /
• 2006

유한요소법으로 공학적 문제를 해결할 때에는 적절한 모델링을 통하여 가장 빠르고 정확한 해를 얻도록 해야 한다. 유체 흐름의 기본 변수인 속도는 그 공간 도함수가 요소간에 불연속을 이루게 된다. 속도의 공간 도함수는 기본적으로 유체에서의 응력, 압력, 및 와도 등과 밀접한 관련이 있다. 또한 이러한 요소간의 속도의 공간 도함수에서 발생하는 불연속의 크기는 요소망이 세분화되어 감에 따라 감소하면서 정확한 해에 수렴하게 된다. 즉 속도의 공간 도함수를 대상으로 오차에 정도를 판단하는 것이 기존의 유한요소 모델의 타당성을 판단하는 기준으로 적합함을 알 수 있다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.7
• /
• pp.580-583
• /
• 2017

To compensate the degraded SAR image due to the residual errors and the spatial variant errors remaining after the motion compensation in the airborne SAR, we have introduced the autofocus method based on the partition processing. Thus, after we perform the spatial partition for the spotlight SAR data and the time partition for the stripmap SAR data, we reconstruct the subpatch images for the partitioned data. Then, we perform the local autofocus with the suitability analysis process for the phase errors estimated by the autofocus. Moreover, if the estimated phase errors are not properly compensated for the subpatch images, we perform the phase compensation method with the weight to the estimated phase error close to the degraded subpatch image to increase the SAR image quality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.4
• /
• pp.387-397
• /
• 1992

The spatial domain design of 2-dimensional separable denominator digital filters(SDDF) based on the reduced dimensional decomposition can be realized when the given 2-D impulse response specifications are decomposed into a pair of 1-D specifications via singular value decompositions(SVD). Because of use of the balaned approximation and equivalent transform as 1-D design algorithm, 2-D design algorithm retains the advantage that is numerically stable and can minimize quantization errors. In this paper in order to analyze and reduce these errors, minimum comfficient quantization realization is directly derived from impulse response specification. And using the equivalent trans form relation between mininum coefficient quantization error and minimum roundoff error realizations, we optimally realize a SDDF. This algorithm is analyzed by the simulation, which shows that it is superior to direct or balanced realization in quantization errors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1A
• /
• pp.54-61
• /
• 2010

We propose a subspace interference alignment by orthogonalization of reference vectors. The proposed method improves the sum-rate capacity degradation due to the channel decomposition error and channel estimation error in the real environment. Using the proposed method, each cell uses the reference vector that is orthogonal to the adjacent cells. Then the residual interference produced by the channel decomposition error and the channel estimation error is decreased. The simulation results demonstrate that the proposed method achieves the enhanced sum-rate capacity.

• Communications for Statistical Applications and Methods
• /
• v.16 no.2
• /
• pp.265-275
• /
• 2009

This paper considers a linear regression model with a spatial autoregressive disturbance with ill-posed data and proposes the generalized maximum entropy(GME) estimator of regression coefficients. The performance of this estimator is investigated via Monte Carlo experiments. The results show that the GME estimator provides efficient and robust estimate for the unknown parameter.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.3
• /
• pp.125-140
• /
• 2017

Until recently, regression based spatial interpolation methods and Kriging based spatial interpolation methods have been largely used to estimate land price or housing price, but less attention has been paid on comparing the performance of these spatial interpolation methods. In this regard, this research applied regression based spatial interpolators and Kriging based spatial interpolators for estimating the land prices in Dalseo-gu, Daegu metropolitan city and evaluated the accuracy of eight spatial interpolators. OLS, SLM, SEM, and GWR were used as regression based spatial interpolators while SK, OK, UK, and CK were employed as Kriging based spatial interpolators. The global accuracy was statistically evaluated by RMSE, adjusted RMSE, and COD. The relative accuracy was visually compared by three-dimensional residual error map and scatterplot. Results from statistical and visual analyses indicate that GWR reflecting the spatial non-stationarity was a relatively more accurate spatial predictor to estimate land prices in the study area than SAR and Kriging based spatial interpolators considering the spatial dependence. The findings from this research will contribute to the secondary research into analyzing the urban spatial structure with land prices.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.273-279
• /
• 2007

환경분야에서 사용되는 대부분의 자료는 공간상 모든 위치에 그 값이 존재하나 모든 지점에서 자료를 획득하는 것이 불가능하므로 몇 개의 대표 지점에서 필요로 하는 자료를 수집한 후 이를 미관측 지역까지 확장하여 사용하게 된다. 관측된 자료를 이용하여 미관측 지점의 값을 예측하는 과정에는 공간보간 기법이 사용되는데, 본 논문에서는 지역경향면 모델, IDW, RBF, 크리깅 등의 공간보간 기법을 서울시의 미세먼지(PM10) 연평균 농도 공간보간에 적용하고 그 정확성을 살펴보았다. 정확성 평가를 위하여 예측값의 범위, RMSE, 평균오차 등을 살펴보았으며 이로부터 크리깅, RBF 기법의 예측 정확도가 높은 것으로 분석되었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.241-248
• /
• 1995

본 연구에서 얻어진 주된 결과를 요약하면 다음과 같다. 1) 모달필터의 오차로 인해 모달상태 추정에 오차가 발생할 때, 폐루프 진동제어계가 Lyapunov 점근 안정성을 갖기 위한 필요충분 조건식(26)을 유도하였다. 2) 모달필터의 오차가 클수록 폐루프 진동제어계의 안정성은 점점 나빠지게 된다. 3) 모달필터의 오차 .DELTA.D가 존재할 때, L$_{\infty}$-놈 이론을 적용하여 진동제어 응답성능의 오차의 상한, 식(32)를 유도하였다. 4) 응답성능 오차의 상한은 모달필터 오차 .DELTA.D의 크기에 비례하고 있으며, 비례계수는 모달공간에서의 제어기법이 종류에 따라 다르다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1431-1440
• /
• 1993

This paper presents a new NC machine performance test and calibration system. In order to measure NC machine erros in simpler, and less time-comsuming way, some indirect measuring systems such as circular disk system and double ball bar system have been developed instead of laser interferometer. But these indirect measuring systems have shown their limits in identifying each of NC machine error sources in absolute numerical value. Therefore, we developed an unique NC machine error measurement system which provides a simple measuring process like other conventional indirect methods and still can indentify each of NC machine error sources in absolute numerical value.