• 제목/요약/키워드: 골재의 입형

검색결과 36건 처리시간 0.025초

회전형 마쇄기에 의해 생산된 순환 굵은골재를 사용한 콘크리트의 기초적 특성 (Basic Characteristics of the Concrete using Recycled Coarse Aggregates Produced by a Rolling Crusher)

  • 송일범;백대현;손근성;신영인;한민철;한천구
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
    • /
    • pp.249-250
    • /
    • 2010
  • 본 연구에서는 회전형 마쇄기에 의해 생산된 순환굵은 골재의 우수성을 입증하기 위하여 콘크리트의 기초적 특성을 콘크러셔를 사용한 경우와 비교 분석 한 것이다. 그 결과 순환골재 치환율이 증가에 따라 회전형 마쇄기에 의해 생산된 순환골재일 수록 콘크러셔에 비해 유동성 및 압축강도면에서 양호한 것을 알 수 있었는데, 이는 회전형 마쇄기에 의해 생산된 순환골재의 입형이 비교적 둥글어 골재사이의 마찰력이 감소한 것 및 마모작용으로 부착모르터가 다량 제거된 것 등에 기인한 것으로 분석된다.

  • PDF

잔골재 종류변화가 시멘트 모르터의 기초적 특성에 미치는 영향 (Influence of Fine Aggregate Kinds on Fundamental Properties of Cement Mortar)

  • 김성환;배장춘;송승헌;차천수;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
    • /
    • pp.85-88
    • /
    • 2006
  • This study investigated influence of fine aggregate types on fundamental properties of cement mortar. Test showed that concrete using lime stone crushed fine aggregate(L) exhibited the most favorable fluidity due to grain shape and particle distribution, and next was blending aggregate miting L and G, blending aggregate mixing L and N, granite crushed fine aggregate(G), natural fine aggregate(N) in an order. Concrete using N had the highest air content and L was the smallest value because of the effective filling performance by continuos particle distribution. Compressive, tensile and flexural strength of all concrete using L had the highest value due to the smallest value of air content. It is also found that concrete using L resulted in decrease of drying shrinkage length change ratio.

  • PDF

슬래그와 폐주물사를 이용한 아스팔트 혼합물의 소성변형특성에 관한 연구 (Evaluation of Rutting Behavior of Hot Mix Asphalt using Slag and Waste Foundry Sand as Asphalt Paving Materials)

  • 이관호;조재윤;전주용
    • 한국도로학회:학술대회논문집
    • /
    • 한국도로학회 2002년도 학술발표회 논문집
    • /
    • pp.89-92
    • /
    • 2002
  • 본 연구의 목적은 여러 가지의 폐자원중 슬래그 및 폐주물사의 도로포장용 골재로서의 특성을 평가하고, 이를 이용한 다양한 조합의 재활용 아스팔트 혼합물의 소성변형 특성을 평가하는 것이다. 골재특성을 평가하기 위해 입도 및 입형분석, 비중 및 흡수성, 마모저항성, 골재안정성과 같은 시험을 수행하였다. 골재로서의 특성평가 시험 결과 고로슬래그는 비교적 강도 특성이 제강슬래그에 비해 작은 경향을 나타냈다. 마샬배합설계로서 최적 아스팔트 함량이 결정되었고, 그 범위는 7.2%에서 7.5%정도 였다. 재활용 골재를 이용한 조합의 아스팔트 혼합물의 소성변형 특성을 평가하기 위해 간접인장강도시험, 회복탄성계수시험, 크리프 시험을 수행하였다. 재활용 골재를 이용한 아스팔트 혼합물의 소성변형 특성이 일반골재를 이용한 아스팔트 혼합물에 비해 다소 떨어지는 경향을 나타내었다. 다만 현재진행중인 휠트래킹 시험 결과가 나오면 재활용 골재를 활용한 아스팔트 혼합물의 소성변형특성을 좀더 구체적으로 파악할 수 있을 것으로 판단된다.

  • PDF

잔골재로 폐유리를 혼입한 콘크리트의 물리.역학적 특성에 관한 실험적 연구 (Experimental Study on Physical and Mechanical Properties of Concrete with fine Waste Glass)

  • 박승범;조청휘;김정환
    • 콘크리트학회논문집
    • /
    • 제13권2호
    • /
    • pp.184-191
    • /
    • 2001
  • 최근 급속한 산업화 및 생활수준의 향상에 따라 폐유리의 발생량이 급격히 증대하고 있으며 이중 대부분은 재활용되지 못하고 최종처분 되고 있어 심각한 자원낭비 및 환경오염문제를 야기하고 있다. 따라서 본 연구에서는 국내에서 발생되고 있는 폐유리중 대표적인 갈색, 녹색, 무색 폐유리 및 이들을 혼합한 폐유리를 파쇄하여 콘크리트용 잔골재로서의 재활용 가능성을 분석하기 위한 기초적 실험연구를 수행하였다. 시험결과 슬럼프 및 다짐계수는 폐유리 잔골재의 입형이 모가나고 각이져 있고 상대적으로 유리입도가 잔골재보다 크기때문에 감소하였으며, 공기량은 폐유리 잔골재가 0.6mm이상의 입자를 많이 함유하고 있어 증가하는 것으로 나타났다. 또한 압축강도, 인장강도, 휨강도는 폐유리 잔골재의 혼입량이 많아질수록 감소하였으며, 적정 혼입률은 30% 이하가 바람직하고 유동성 확보를 위해서는 적정한 혼화제를 사용해야 한다는 결론을 얻을 수 있었다.

골재의 입도 및 입형이 제품용 시멘트 모르타르의 강도 및 흡수율에 미치는 영향 (Influences of Grading and Grade Shape in Aggregates on the Strength and Absorption of Cement Mortar Products)

  • 한천구;신병철;김기철;이상태
    • 콘크리트학회논문집
    • /
    • 제12권1호
    • /
    • pp.45-52
    • /
    • 2000
  • The quality of cement mortar products largely depends on various work conditions, specially on the grading and grade shape of aggregates. However, the effect of grading and grade shape on the quality is not considered by both KS codes and production processes, resulting in the increase of the possibility of quality degradation. The objective of this study was to investigate the effect of grading and grade shape on the strength and absorption characteristics of cement mortar products. Flexural and compressive strength increased with the increase of fineness modulus and W/C. The strength increase was measured larger with river sand than with crushed sand. Absorption tended to decrease with the increase of fineness modulus and W/C, but did not affected by the source of sand.

재생골재 입형이 재생골재콘크리트의 압축강도와 슬럼프에 미치는 영향 (The Effects of Recycled Aggregate Shape on Compressive Strength and Slump of Recycled Concrete)

  • 정지용;심종우;이세현
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
    • /
    • pp.97-100
    • /
    • 2006
  • The efforts have improved the absorbtion that in order to high the quality of recycled aggregates, and the shape. For the shape of recycled aggregates, the shape of usually aggregates can affect the strength of concrete in an indirect way. So that, in the study, effects is investigated the shape of recycled aggregates that affects the compressive strength and slump. In the result, the a improved shape have a beneficial effect on compressive strength and slump for of a high quality recycled aggregate, and these appear a larger effects in unit water ; $175kg/m^3$ or specified strength ; 24MPa.

  • PDF

잔골재 조립율 및 굵은골재 입형이 콘크리트의 특성에 미치는 영향 (The Effect on the Properties of Concrete by Fine Aggregate Fineness Modulus and Grain Shape of Coarse Aggregate)

  • 정용욱;윤용호;이승한
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2003년도 가을 학술발표회 논문집
    • /
    • pp.102-105
    • /
    • 2003
  • The purpose of this study is to examine the influence of the flowability and the compressive strength of concrete after the improving of grain shape of the coarse aggregate and fine aggregate fineness modulus. According to the experimental results, the coarse aggregate after improvement of grain shape it lead to be down by 6% fine aggregate ratio, from 47% to 41%. The 0.5% increase of fine aggregate fineness modulus lead to 3% increase of concrete slump, and 1% reduction of concrete air content. While compressive strength on fine aggregate fineness modulus, it was increased until fineness modulus 3.0, but after it reached by 3.5 it was decreased. The compressive strength of the coarse aggregate after improving the grain shape was decreased by 6% due to loss of the adhesion of cement paste.

  • PDF

콘크리트용 부순 굵은 골재의 입형이 콘크리트의 물리적 성질에 미치는 영향에 관한 연구 (A study on the Effect of Aggregate Particle Shape on Property of Concrete)

  • 서기원;이욱재;김학연;김남호
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
    • /
    • pp.209-212
    • /
    • 2004
  • Recent economic development caused a vast use of mineral resources in Korea. Consequently, a supply of poor quality course aggregate (poor particle shape as well as poor gradation) in construction material become a social problem. In this study, an effect of aggregate particle shape on property of concrete was evaluated. The flat and elongation ratio of crushed aggregate was controled to 8, 15, 25, 35, and $47\%$ in order to evaluate fresh concrete behavior as well as physical properties in hardened concrete. Test result shows a poor aggregate particle shape cause a significant increase in entrapped air in fresh concrete, while no significant effect on hardened concrete property, such as strength as well as stiffness. This increase in entrapped air, however, believed to cause a significant decrease in concrete durability.

  • PDF

페로니켈슬래그 잔골재의 바닥용 건조모르타르 적용성 평가 (Applicability of Ferro-nickel Slag Sand for Dry Mortar in Floor)

  • 조봉석;김원기;황인성;구경모
    • 한국건축시공학회지
    • /
    • 제19권2호
    • /
    • pp.105-112
    • /
    • 2019
  • 페로니켈슬래그 잔골재는 천연 잔골재와 유사한 특성이 있어 국내 외적으로 콘크리트 구조물에 사용되고 있으나 그 용도와 연구의 영역이 한정적이다. 이에 본 연구에서는 FNS의 활용성 확대와 모르타르제품의 성능개선을 목적으로 바닥용 건조모르타르에 대한 FNS의 적용성을 검토하고자 하였다. 실험 결과, FNS는 흡수율이 낮고 구형의 입형이며 표면이 유리질 피막의 특성이 있어 모르타르의 플로을 향상시켰다. 또한 골재 자체의 높은 강성은 몰탈 압축강도의 향상 및 수축저감 효과를 나타내어 균열저감 등의 품질향상에 기여할 것으로 판단된다. 뿐만 아니라 천연 잔골재를 사용한 모르타르와 비교하여 FNS를 적용하는 경우 동등수준 이상의 충격음 차단성능을 확보할 수 있었다.

압축강도 수준별 순환골재 콘크리트의 강도와 길이변화 특성 (The Strength and Length Change Properties of Recycled Aggregate Concrete(RAC) by Compressive Strength Levels)

  • 이봉춘;이준;조영근;정상화
    • 한국건설순환자원학회논문집
    • /
    • 제3권4호
    • /
    • pp.307-312
    • /
    • 2015
  • 본 연구에서는 국내에서 생산되고 있는 콘크리트용 순환 굵은 골재를 사용하여 콘크리트의 압축강도 수준별(20, 35, 50MPa) 순환 굵은 골재의 혼입률 변화가 강도와 건조수축에 미치는 영향을 분석하였다. 실험결과 순환 굵은 골재의 치환율 변화에 따른 유동성(슬럼프)은 순환골재를 혼입하지 않은 경우에 비해 동등하거나 양호한 유동성을 갖는 것으로 나타났다. 이러한 영향은 국내에서 생산되는 순환골재의 양호한 입형이 유동성 개선에 기여한 것으로 판단된다. 또한, 순환 굵은 골재의 치환율 변화에 따른 압축강도는 순환골재 혼입률이 증가할수록 약 9~10% 감소하는 것으로 나타났으며 순환 굵은 골재의 치환율에 따른 길이변화는 강도 수준에 관계없이 약 4~40%의 범위로 증가하는 것으로 나타났다. 저강도 수준(20MPa)에서의 길이변화량은 약 18~40%로 35MPa 및 50MPa 수준의 길이변화량 약 4~17% 보다 큰 것으로 나타났다. 저강도 수준(20MPa)에서의 순환 굵은 골재 활용량을 증대시키기 위해서는 광물혼화제의 첨가 등 건조수축을 억제시킬 수 있는 방안 마련이 필요하다.