• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.937-945
• /
• 2000

The assessment of machined surface is difficult because the freeform surface must be evaluated by surface fairness as well as dimensional accuracy. In this study, the machined freeform surface is modeled by interpolating the data measured on the machine tool into the mathematical continuous surface, and then the surface model is improved with the parameterization to minimize surface fairness. The accuracy reliability of the measured data is confirmed through compensation of volumetric errors of the machine tool and of probing errors. Non-uniform B-spline surface interpolation method is adopted to guarantee the continuity of surface model. Surface fairness is evaluated with the consideration of normal curvature on the interpolated surface. The validity and usefulness of the proposed method is examined through computer simulation and experiment on the machine tool.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.6
• /
• pp.601-610
• /
• 2008

This paper deals with a new geometrical surface modeling method of forebody's hull form which is fully defined by form parameters. The complex hull form in the forebody can be modeled by the combination of three parts: bare hull, bulbous bow and blending part which connects a bare hull and a bulbous bow. All these subdomain parts are characterized by each own form parameters and constructed with simple surface model. For this, we need only 2-dimensional hull form data and then the form parameters are calculated automatically from these data. Finally, the smooth hull form surfaces are generated by parametric design and fair-skinning. In the practical point of view, we show that this new method can be useful and efficient modeling tool by applying to the hull form surface modeling of Panamax container's forebody.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.3
• /
• pp.136-148
• /
• 2000

In this work, a general method for the mathematical description of three-dimensional trimmed surface is proposed by introducing the base parametric surface and boundary curves. Since mesh density distribution for the analysis may vary by cases, a grid-based mesh generation algorithm using quadtree is proposed in the present work. For the assurance of connectivity of generated meshes among surfaces, a method for the pre-cleaning of boundary curves has been developed to be used in the automatic generation of the finite elements. In addition, mesh-smoothing algorithm is suggested which can be used in the general trimmed surface. In this algorithm nodes are moved on the original surface by the normal projection in each iterative smoothing procedure.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1227-1230
• /
• 2003

A roughing process is one of the most important and indispensable shoe manufacturing processes of various types of shoes. This basic process to rough the upper of the shoe is studied to improve the productivity and to reduce the processing time. In this study, the CAM system for shoe roughing is developed. The B-spline surface generated by the developed CAM system ignores the small inclinations of the real roughing surface because the developed roughing tool has potential to rough the roughing surface of the shoe properly. The roughing tool roughs the roughing surface using its side along the generated tool paths. The generated NC codes were applied to 5-axis polishing machine for the test. Experimental results show good evaluation result. The upper of the shoe is roughed properly along the roughing path line and the roughing surface was good to cement the outsole of the shoe.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.2
• /
• pp.59-64
• /
• 2004

Most features of nature and phenomena we encounter in many branches of science are inherently very irregular and have fractal aspects. Thus the analysis of them with the traditional methods such as a differential operator may result in their ill-posed problems. To settle these problems, one may use several type of mean filters which smooth the input signal. However when a given function or data are complex in their nature, there may be loss of some original information during these process. In this paper, we utilized the tangent plane method instead of mean filters for the purpose of less loss of information and more smoothness. After then we attempt to take more accurate edges for the irregular image on the basis of the Otzu threshold. Finally we introduce the effective edge extracting method which use the fractal dimension representing the complexity of the given image.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2004.06a
• /
• pp.89-94
• /
• 2004

우리가 일반적으로 다루는 많은 대상들은 대부분 복잡하고 불규칙적인 형태를 지니고 있다. 이로 인해 보통 사용하는 미분연산자와 같은 전통의 수학적 기법들은 경우에 따라 심각한 불량 문제(ill-posed problem)를 야기하여 부정확한 결과를 나타내기도 한다. 이의 해결을 위해 전처리 과정으로 평활화를 위한 여러 가지 mean filter를 사용하기도 한다. 그렇지만 원 자료가 근본적으로 복잡한 경우 위 과정으로 오히려 중요 정보가 소실될 수도 있다. 이에 본 논문에서는 먼저 전처리로서 흔히 사용되는 각종 평균필터 대신 손실을 최소화하면서 곡면의 부드러움(smoothness)을 유도할 수 있는 접평면 접근 방식을 이용하고. 아울러 대상 영상의 복잡도에 연동한 프랙탈 차원을 적용하여 보다 효과적으로 영상의 경계를 추출하고자 했다.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.79-84
• /
• 2019

Video image based technology is being used in various fields with continuous development. The demand for vision system technology that analyzes and discriminates image objects acquired through cameras is rapidly increasing. Image processing is one of the core technologies of vision systems, and is used for defect inspection in the semiconductor manufacturing field, object recognition inspection such as the number of tire surfaces and symbols. In addition, research into license plate recognition is ongoing, and it is necessary to recognize objects quickly and accurately. In this paper, propose a recognition model through the rotational alignment of objects after checking the angle value of the tilt of the object in the input video image for the recognition of inclined objects such as numbers or symbols marked on the surface. The proposed model can perform object recognition of the rotationally sorted image after extracting the object region and calculating the angle of the object based on the contour algorithm. The proposed model extracts the object region based on the contour algorithm, calculates the angle of the object, and then performs object recognition on the rotationally aligned image. In future research, it is necessary to study template matching through machine learning.