• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.311-312
• /
• 2023

In this study, porous concrete with improved functionality was developed by using superabsorbent polymer (SAP) to provide rooting space for plants. The depth of settlement and mass change according to the substitution and addition rate of SAP were determined by investigating the functional performance of SAP and the volume change upon saturation. Test results indicated the depth of penetration settlement increased as the substitution rate of SAP increased, but the mass change could not be confirmed as the addition rate of SAP increased. The instability of the specimens due to the excessive volume change of SAP, as well as the osmotic pressure phenomenon according to the pH concentration, were identified as the cause. Therefore, future studies are needed to investigate the appropriate substitution and addition rate of SAP, as well as to reduce the osmotic pressure phenomenon according to the pH concentration, which would contribute to the improvement of the functional performance of vegetation concrete.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.311-312
• /
• 2016

본 논문에서는 사이즈가 다른 고출력 원통형 리튬이온 배터리의 Remaining Useful Life(RUL)을 방전용량 기반으로 전기적 특성분석을 실시하였다. 우선, 배터리의 충/방전이 계속될 시 용량이 어떻게 변화하는지 실험해보았으며, 만충 전압(Fully Charged)에서 만방 전압(Fully Discharged) 까지의 각각의 State-Of-Charge(SOC)에서 Hybrid Pulse Power Characterization (HPPC) Test를 이용해 충전 저항과 방전 저항을 구하여, 용량과 저항의 관계를 파악하였으며, 배터리 RUL을 알기 위한 기본 정보를 확보했다.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.518-519
• /
• 2010

본 논문에서는 EV용 25kW급 In Wheel Type의 IPMSM을 제어 할 수 있는 구동장치를 제작하였다. 여기서 In Wheel Motor는 고성능의 전기모터를 Wheel에 직접 장착하여 파워트레인 요소를 모두 제거함으로써 차량 시스템의 효율을 높이고, 친환경 차량에 적용할 수 있는 신개념의 플랫폼을 제공할 수 있는 고효율, 고성능 차량 시스템이다. 따라서 본 논문에서는 EV용 In Wheel Motor와 이를 제어하기 위한 구동장치에 대한 제어시스템을 제안하고 이를 실험을 통해 검증하였다.

• Microbiology and Biotechnology Letters
• /
• v.26 no.6
• /
• pp.537-544
• /
• 1998

The cultivation conditions of transformant Alcaligenes eutrophus AER5 harboring cloned phbC gene for mass production of poly (3-hydroxybutyrate-3-hydroxyvalerate)[P(3HB-3HV)] containing high molar fraction of 3-hydroxyvalerate (3-HV) were investigated. In two-stage batch cultivation, transformant accumulated P(3HB-3HV) containing 52.2 mol% of 3HV compared to 30 mol% of parent strain A. eutrophus H16. The increased 3-HV molar fraction was due to the amplified activity of PHB synthase participating in condensation of 3-HB and 3-HV. To increase efficiency of P(3HB-3HV) accumulation, fructose was added along with precursor compound valerate, and total cell mass and P(3HB-3HV) concentrations remarkably increased, but not 3-HV molar fraction. The effect of magnesium ion showed that P(3HB-3HV) concentration and 3-HV molar fraction were significantly increased upto 6.1 g/L and 71.3 mol% at 0.01 g/L of MgSO$_4$, respectively. The efficiency of several pH adjuster, NaOH, NaOH and (NH$_4$)$_2$SO$_4$, and NH$_4$OH, on total cell mass, p(3HB-3HV) concentration, and 3-HV molar fraction was also compared. To overcome the disadvantage of two-stage cultivation, one-stage intermittent fed-batch cultivation was attempted, such a way 10.0 g/L of fructose was supplied for cell growth at initial 36 hr and then 10.0 g/L of valerate and 5.0 g/L of fructose were applied to induce the accumulation of P(3HB-3HV), consequently, 10.4 g/L of P(3HB-3HV) with 38 mol% of 3-HV fraction could be obtained after 72 hr. These results can be used for elucidating cultivation strategy for mass production of P(3HB-3HV) containing high 3-HV molar fraction using transformant A. eutrophus AER5 harboring cloned phbC gene.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.554-556
• /
• 2003

This research was focused on expression, purification and characterization of ubiquitin-specific protease 1 (UBP1) expressed in recombinant Escherichia coli. Various systems were constructed by fusing polycationic fusion tails or fusion partners to the C- or N-terminus of the product protein. In particular, UBP1 containing 6 histidine residues at the N-terminal end showed best results in terms of expression level and purification efficiency. The N-terminal $6{\times}His-tagged$ UBP1 was overproduced in recombinant E. coli using high cell density cultivation technology and purified using immobilized metal affinity chromatography. The molecular weight of UBP1 was found to be 83,500 daltons. The optimum temperature and pH for the enzyme reaction when ubiquitin-human growth hormone (hGH) was used as a substrate were $40^{\circ}C$ and pH 8.0, respectively.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.61-64
• /
• 2007

This study progressed fresh mortar test and hardening mortar test as a characteristic analysis of high strength mortar that is not water but replaced liquid, and the results are summarized as following. As a characteristic of fresh mortar, the flow that is following by the changes of the kind of replaced liquid decreased in order of E, M, A, K, O, L, G, and H, and it is indicated that liquid except H, the flow was better then others. The test show the bending strength of G, L, K, O at and H were more increased then plain as the replaced liquid change on the first day, and on the 28th day, G, L, and K was more increased then plain. The compressive strength of G, K, and O was similar with P(-10) at the first day. On 7th day, the test show G, and L was more increased then P(-10), and other replaced liquid were similar or decreased. On the 28th day, G, K, and A was similar with P(-10) and it is decreased in order of E, L, O, and H.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.9
• /
• pp.879-886
• /
• 2010

This study investigated the removal characteristics of highly concentrated $NH_4$-N and $PO_4$-P by struvite crystallization using converter slag as a seed crystal. The optimal pH range for removal and recovery of $NH_4$-N and $PO_4$-P by struvite crystallization was measured to be 8.0~8.75, in which total removal efficiencies for $NH_4$-N and $PO_4$-P by struvite precipitation and crystallization were 34.3~61.0% and 91.0~96.2%, respectively. The maximum removal efficiencies for $NH_4$-N and $PO_4$-P by struvite crystallization were 29.4% at pH 8.5 and 65.1% at pH 8.0, respectively. The removal efficiency of $NH_4$-N by struvite crystallization decreased with increasing calcium ion concentration. The analysis results of SEM, EDS and XRD exhibited that $NH_4$-N and $PO_4$-P in meta-stable region of struvite crystallization could be eliminated through formation of magnesium ammonia phosphate (MAP) and hydroxyapatite (HAp) on seed crystals by struvite precipitation and crystallization.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.510-514
• /
• 1989

This paper presents a new converter composed of a P.W.M controller and a resonant converter which operates at a constant frequency. This converter has relatively simple control circuits and high conversion efficiency. The optimum operating point corresponding to maximum efficient for the S.R.C and P.R.C operating above resonance is obtained.

• Journal of Korea Soil Environment Society
• /
• v.4 no.1
• /
• pp.49-55
• /
• 1999

The treatment of petroleum contaminated soil requires various physico-chemical remediation technologies which are efficient in time and can reduce the possibility of secondary contamination by themselves In this study, an innovated soil washing process was proposed to treat the diesel-contaminated soil. Micro-bubbles, which were generated by hydrogen peroxide, deserted and floated the contaminants. Soils less than #60(0.25mm) were artificially contaminated by 6,500mg TPH/kg dry soil initially. The process was examined for pH, the soil to water mixing ratio, concentration of $H_2O$$_2$, and contacting times. In the case of less than #60 soil, maximum removal efficiency(60%) was obtained at pH 12. 1.0% hydrogen peroxide, and 1 : 5 soil to water mixing ratio for 1 hour.

• Microbiology and Biotechnology Letters
• /
• v.18 no.3
• /
• pp.273-279
• /
• 1990

For poly- $\beta$ -hydroxybutyrate (PHB) production, a pink-pigmented facultative methylotrophic bacterium (PPFM) P-10 was newly isolated from soils through methanol-enrichment culture. The optimal medium composition for cell growth was 1.0% (vlv) of methanol as carbon source and l.Og/l of ,TEX>$NH_4Cl$, equivalent to C/N ratio of 13.2 at pH 7.0 and $30^{\circ}C$. To investigate the optimal condition for YHB accumulation, two-stage culture technique was adopted; first stage for cell growth and second stage for accumulation of PHB providing unbalanced growth conditions. The optimal PHB accumulation was 1.0% (vIv) of methanol and 0.26gll of $NH_4Cl$, C/N of 50.8 at pH 6.0. To overcome methanol inhibition on cell growth, intermittent feeding fed-batch culture technique was employed, and the cell concentration as high as 14gll with 40% of PHB was achieved. The purified PHB was identified using IR and $1^H NMR$ as homopolymer of 8hydroxybutyric acid. The absorption spectrum of extracted pink colored microbial pigment was alsa investigated.