• Journal of environmental and Sanitary engineering
• /
• v.13 no.2
• /
• pp.128-138
• /
• 1998

This study was focused to find how each factors effect on the biological nitrification in wastewater treatment under high ammonia nitrogen concentration. Batch reactors in aerobic conditions were used to test the treatment efficiency of mixed liquor, nightsoil and piggery wastewater. The results are summeried as follows; Initial ammonia nitrogen concentration and pH were the direct influencing factors of nitrite build-up. More than 250 mg NH$_{4}$$^{+}$ - N/L in initial concentration built up nitrite and then the inhibition rate to Nitrobacter was above 70 percentage. And maximum nitritation rate was showed at pH 8.3 and nitrification could be completely achieved by pH control. Temperature and dissolved oxygen were the indirect influencing factors of nitrite build-up. These were a great effect on the activity of nitrifying microbes and ammonia nitrogen removal. Maximum nitritation rate was showed at 30 $\circ $C. The effect of DO concentration was negligible at more than 3 mg/L.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1997.05a
• /
• pp.92-96
• /
• 1997

고농도로 오염된 난분해성 유해오염물질은 토양계에 존재하고 있는 미생물에 대한 독성과 낮은 활성도로 인하여 복원기술 발전에 제한되어진다. 본 연구에서는 pH 4.8과 pH 7.7인 토양에 Phenanthrene을 인위적으로 오염시킨후 heme 촉매와 과산화수소를 이용하여 오염토양을 복원하는 기술에 대한l 기초적 연구를 수행하였다. Heme과 과산화수소를 오염토양에 첨가한 뒤 30일 반응후 토양내 존재하고 있는 Phenanthrene 초기농도 약 400 mg/kg soil에 대한 분해율은 pH 4.8과 7.7 오염토양내 각각 50％와 67%이었다. Heme과 과산화수소를 이용한 오염토양의 복원기술은 중성 오염토양에서 약 3일후 67％ 빠르게 분해되는 결과를 보여주고 있다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.385-390
• /
• 1996

Cs는 AW500 에서 높은 분배계수 값(K$_{Cs}$>$10^3$$m\ell$/g)을 얻었으며 , Sr은 13X, 평형 용액의 pH=10의 조건에서 최대의 분배계수값(K$_{Sr}$~$10^4$$m\ell$/g)을 보였고, 평형용액의 pH 증가에 따라서 급격히 증가하는 경향을 보였다. 또한 AW500-Cs와 13X-Sr계는 고액비, 즉 V/m=40, 및 초기용액의 pH가 3 이상에서 최대의 분배계수 값을 얻었으며, 혼합제올라이트의 비(AW500/13X)가 1.5인 조건에서 Cs과 Sr을 효과적으로 동시에 분리할 수 있음 보았다. 그리고 1,10$0^{\circ}C$에서 배소한 AW500-Cs는 CsAlSi$_2$O$_{6}$로 재결정되며 , 13X-Sr은 SrAI$_2$Si$_2$O$_{8}$ 및 SiO$_2$상(phase)으로 재결정한다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.386-390
• /
• 2003

To evaluate the potential capacity of mine wastes in the production of heavy metal containing acid water, samples from depths of 0, 30 and 60cm were collected and analyzed. The waste from surface showed the lowest pH which indicates the oxidation of wastes and the capacity of contamination of the area around the waste file. And the lower pH values of leachate of the wastes through the leaching tests with pH controlled water(3, 4, 5) may indicate that minerals producing the acidity still exist. Reduction of sulfur contents in wastes after the leaching test well fit to the increased contents of iron oxide.

• Journal of the Korean Ceramic Society
• /
• v.47 no.5
• /
• pp.419-425
• /
• 2010

In order to examine the P.H.C pile raw material using glass forming ceramic. The used materials is ordinary portland cement, waste TFT-LCD glass powder and reactive agent(Ca$(OH)_2$). The first experiment is characteristics analysis of the waste TFT-LCD glass powder, For the second experiment is mortar and concrete compressive strength for using of the concrete file raw material for waste TFT-LCD glass powder. The results of experiment showed that the substitution ratio of 10% waste TFT-LCD glass powder and 1% reactive agent(Ca$(OH)_2$) was excellent at a point of view for the physical characteristic. The study's most important finding is that the recycling of waste TFT-LCD glass powder.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.4
• /
• pp.701-711
• /
• 2013

Objectives : The aim of this study was to evaluate the pH and buffering capacity in some commercial fermented milks in Korea. Methods : The study was carried ouf from June to August, 2012. In 35 liquid type, 79 condense-stirred type and 71 condense-drink type fermented milks, available on the market, pH and buffering capacity were measured. Titration(with NaOH) was used to determine the buffering effect of each fermented milk. They were titrated with 1 M sodium hydroxide, added in 0.1 milliliters increments, until the pH reached about 5.5 and 7.0. Results : The average pH of tested fermented milks was $4.08{\pm}0.27$. The average pH values of fermented milks were $3.64{\pm}0.22$ in liquid type, $4.14{\pm}0.12$ in condense-stirred type, and $4.22{\pm}0.17$ condense-drink type. The average buffering capacity (pH 5.5) of tested fermented milk was $2.40{\pm}0.54$. The average buffering capacity (pH 5.5) of liquid type fermented milk was $2.37{\pm}0.33$, condense-stirred type fermented milk was $2.77{\pm}0.46$ and condense-drink type fermented milk was $2.01{\pm}0.42$. The average buffering capacity (pH 7.0) of tested fermented milks was $4.00{\pm}0.87$. The average buffering capacity (pH 7.0) of liquid type fermented milk was $3.11{\pm}0.36$, condense-stirred type fermented milk was $4.78{\pm}0.55$ and condense-drink type fermented milk was $3.58{\pm}0.59$. Conclusions : The average pH of tested fermented milks in this study was lower than pH 4.5. The type of fermented milks was an important factor for selection of fermented milk which is related with enamel erosion.

• Tunnel and Underground Space
• /
• v.19 no.5
• /
• pp.373-387
• /
• 2009

Considering the current construction technology and research status of deep repository tunnels for radioactive waste disposal, it is inevitable to use cementitious materials in spite of serious concern about their long-term environmental stability. Thus, it is an emerging task to develop low pH cementitious materials. This study reviews the state of the technology on low pH cements developed in Sweden, Switzerland, France, and Japan as well as in Finland which is constructing a real deep repository site for high-level radioactive waste disposal. Considering the physical and chemical stability of bentonite which acts as a buffer material, a low pH cement limits to $pH{\leq}11$ and pozzolan-type admixtures are used to lower the pH of cement. To attain this pH requirement, silica fume, which is one of the most promising admixtures, should occupy at least 40 wt% of total dry materials in cement and the Ca/Si ratio should be maintained below 0.8 in cement. Additionally, selective super-plasticizer needs to be used because a high amount of water is demanded from the use of a large amount of silica fume.

• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.3
• /
• pp.153-158
• /
• 1973

This report was presented to explain the relationships between various soil pH based on the present land use, nodes of depositions, and pH measurement methods ($H_2O$ and KCl extract). The samples were collected from 160 soil series in Korea. The results were summarized as follows. 1. The average pH ($H_2O$) of surface soil were $5.3{\pm}0.6$ for paddy soils, $5.5{\pm}0.9$ for upland, $5.4{\pm}0.5$ for forest soils, $5.3{\pm}0.6$ for grassland and $5.4{\pm}0.7$ for country average. 2. The average pH (KCl) of surface soil were $4.2{\pm}0.6$ for representative soils. Paddy soils had $4.2{\pm}0.6$; upland $4.2{\pm}0.8$; forest soils, $4.0{\pm}0.6$; and grassland, $4.3{\pm}0.6$. 3. The soil pH in B and C horizons were generally higher than that of A horizons. 4. The soil pH in field were correlated with lab. soil pH ($H_2O$) and pH (KCl). Field soil pH measured by pH kit could be highly accepted in accuracy compared with lab. pH of upland, grassland, forest and paddy soils. 5. Soil pH ($H_2O$) of surface based on mode of depositions was generally higher in residuum of mountainous and hilly land than those of Fluvio-marine deposits and old alluvium, however soil pH (KCl) was higher in fiuvio-marine deposits than those of mountainous and hilly land. It was shown that soil pH (KCl) was more reasonable than that of soil pH ($H_2O$) in practical use.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.238-238
• /
• 2011

Ion sensitive field effect transistor (ISFET)는 용액의 이온 농도를 측정하는 반도체 센서로, 1970년 Bergveld에 의해 처음으로 제안되었다. ISFET가 제안된 이래로, 제조공정이 간단하고 감지막의 감지 특성 평가가 용이한 electrolyte-insulator-semiconductor (EIS) pH센서 또한 지속적으로 연구되었다. EIS pH센서는 작은 소자 크기, 견고한 구조, 빠른 응답속도와 CMOS공정과의 호환성이 좋다는 장점이 있다. EIS 또는 ISFET 센서를 이용하여 생물학적 요소의 신호 감지 특성을 평가함에 있어 소자의 signal to noise 비율이 우수해야 한다. EIS pH센서의 높은 signal to noise 비율을 얻기 위해, 소자의 표면적을 증가시키거나 감지막으로 유전상수가 높은 물질을 사용하여 출력 특성을 향상시켜야 한다. 본 연구에서는 trench구조와 SiO2/HfO2/Al2O3 (OHA) 적층 감지막을 갖는 EIS pH센서를 제작하여 출력 특성을 증가시키는 실험을 실시하였다. 120 nm, 380 nm, 780 nm의 다양한 깊이를 가진 trench를 형성하였으며, trench 깊이에 따른 출력특성을 비교하였다. 또한, 제작된 EIS 소자의 pH감지 특성을 분석하였다. 제작된 EIS소자의 감지막 중 SiO2는 Si와 high-k물질의 계면 상태를 보완하기 위한 완충막으로 성장되었고, HfO2는 높은 유전상수를 가지고 있어 signal to noise 비율을 향상시키는 물질로 증착되었다. 최종적으로 Al2O3는 pH용액과의 화학적 손상을 막기 위한 물질로 증착되었다. 실험 결과, trench 깊이가 깊어질수록 출력값이 증가하였고 이는 signal to noise 비율이 향상되는 것을 의미한다. 결론적으로 trench 형성을 통한 표면적 증가와 high-k물질을 적층한 감지막으로 인해 높은 출력 특성을 갖는 우수한 EIS 바이오센서를 제작할 수 있었다.

• The Korean Journal of Mycology
• /
• v.9 no.1
• /
• pp.39-43
• /
• 1981

The enzymatic properties of pectin esterase from Aspergillus sp. were studied. The optimum conditions for the enzyme reaction were pH 4.2 and temperature of $45^{\circ}C$. The crude enzyme was very stable at pH range of $2.2{\sim}4.6$, but about 20 percent of activity was lost at the range of pH $5.4{\sim}8.0$. The crude enzyme was very stable at $50^{\circ}C$ for one hour, however almost 100 percent of enzyme activity was lost at $70^{\circ}C$ for 30 minutes. The pectin esterase activity of crude enzyme was greatly inhibited by addition of sodium chloride at lower pH range. That is, the inhibition rates of enzyme activity at pH 3.0 and 4.0 were 47% and 28% in concentration of 1M sodium chloride, respectively. The enzyme activity was not affected by sodium chloride at pH 7.0 at different concentration of sodium chloride. Although the enzyme activity was not affected by addition of sucrose, it was slightly inhibited at higher concentration of sucrose.