• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.371-374
• /
• 2024

본 논문에서는 PBD(Position-based dynamics)를 이용한 옷감 시뮬레이션에서 페이스(Face) 및 에지(Edge)의 충돌/접촉을 처리할 때 나타나는 표면 떨림 문제를 SDF(Signed Distance Field) 접근법을 통해 안정적으로 해결할 수 있는 기법을 제안한다. 충돌 제약 조건을 이용한 충돌처리에서 나타나는 옷감 시뮬레이션의 떨림 현상을 개선하기 위해 본 논문에서는 페이스 및 에지 내부에 존재하는 충돌 지점의 속도를 충돌 법선 방향과 접선 방향으로 나누어 계산하는 과정을 거치며, 그 운동량을 페이스 및 에지에 포함된 연결된 정점(Vertex)에 전달한다. 본 논문에서 제안하는 기법은 일반적인 SDF 기반 충돌 처리에서 나타나는 충돌 시 떨림 현상을 개선하며, 기존의 방법보다 안정적인 SDF 충돌처리가 가능하기 때문에 다양한 변형체 재질을 시뮬레이션 할 때 활용될 수 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.3
• /
• pp.343-348
• /
• 1986

An optical interference method was developed for measuring rapidly growing and evaporating liquid condensate films (e.g., Na$_{2}$SO$_{4}$, $K_{2}$SO$_{4}$) on solid surface exposed to flowing combustion product gases at film thicknesses well below the onset of complications due to run-off. To develop this optical system, this study investigated the optical parameters (e.g., polarization state, incident angle, target roughness, etc.) Trends for the Na$_{2}$SO$_{4}$(l) and $K_{2}$SO$_{4}$(l) deposition rates as a function of target temperature using this optical measuring system agree with the theoretical prediction of the vapor deposition. This study was able to extend the experimental range for vapor plus condensed phase transport and deposition. While previously unable to measure the evaporation rates interferometrically, these rates are estimated from the results of the investigation of polarization states.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.1
• /
• pp.35-43
• /
• 2002

In the last decade, considerable efforts have been made to make a new class of solid state high power, high speed electronic device, namely, the Photo-Conductive Power Switch(PCPS), and to characterize the high-field performance of PCPS under high power, high voltage conditions. But the problem of surface flashover phenomena persist, preventing the realization of reliable and efficient high-speed, high voltage switching devices. It is essential to have a clear understanding on the physical processes behind the surface flashover problem to develop new technologies and device architectures so as to fabricate PCPS that are capable of high-field high-voltage. Also, it is imperative to identify new materials that could satisfy the requirements for high-field, high-power devices. Since surface flashover, surface breakdown phenomena is observed for all the devices that foiled at the applied field much lower than semiconductor bulk breakdown field, surface passivation is considered one of the important practical methods to improve the high field performance of the devices. Therefore, this paper was studied the main properties and mechanism of the semiconductor surface flashover before and after passivation under high electric-field.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.1
• /
• pp.33-38
• /
• 2009

An experiment for uranium sorption onto fresh and weathered biotites was performed. After centrifugation, concentrations of uranium in the supernatants were analyzed using ICP-MS, and biotite samples were investigated using XRD and SEM. With powdered biotites (<3 mm in size), we have conducted uranium sorption experiments about fresh and weathered biotites to obtain uranium sorption amounts in various pH conditions. The uranium sorption was not high at a low pH (e.g., pH 3), but increased with increasing pH. There were lower uranium sorption by the weathered biotites than by the fresh ones, and the difference was much larger at higher pH (e.g., pH 11). The lower sorption values of uranium by the weathered biotites may be caused by a change of mineral surfaces and a chemical behavior of surrounding dissolved elements. It seems that the uranium-mineral interaction has been diminished, especially, in the weathered biotite by a destruction and dissolution of preferential sorption sites on the mineral surfaces and by the colloidal formation from dissolved elements.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.4
• /
• pp.67-74
• /
• 1999

Problems created by supersonic jet impinging on solid objects or ground arise in a variety of situations. For example multi-stage rocket separation, deep-space docking, V/STOL aircraft, jet-engine exhaust, gas-turbine blade, terrestrial rocket launch, and so on. These impinging jet flows generally contain a complex structures. (mixed subsonic and supersonic regions, interacting shocks and expansion waves, regions of turbulent shear layer) This paper describes experimental works on the phenomena (surface pressure distribution, flow visualization) when underexpanded supersonic jets impinge on the perpendicular, inclined plate using a supersonic cold-(low system. The used supersonic nozzle is convergent-divergent type, exit Mach number 2, The maximum on the plate when it was inclined was much larger than perpendicular plate, owing to high pressure recoveries through multiple shocks. Surface pressure distribution as to underexpanded ratio showed similar patterns together.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.1
• /
• pp.37-46
• /
• 2017

Thermal Marangoni flow has been observed inside droplets on heated surfaces, finally resulting in a coffee stain effect. This study aims to visualize and control the thermal Marangoni flow by employing periodic vertical vibration. The variations in the contact angle and internal volume of the droplet as it evaporates is observed by using a combination of continuous light and a still camera. With regard to the internal velocity, the particle image velocimetry system is applied to visualize the internal thermal Marangoni flow. In order to estimate the internal temperature gradient and surface tension on the surface of a droplet, the theoretical model based on the conduction and convection theory of heat transfer is applied. Thus, the internal velocity increases with an increase in plate temperature. The flow directions of the Marangoni and gravitational flows are opposite, and hence, it may be possible to control the coffee stain effect.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.5
• /
• pp.397-401
• /
• 2000

The corrosion-fatigue characteristics of the 12Cr steel, which is widely used in fossil power plants as a turbine blade material, are evaluated nondestructively by use of the Rayleigh surface wave. In this study, the frequency dependency of the Rayleigh surface wave is investigated indirectly by measuring the angular dependency of the backward radiation of the incident ultrasonic wave in the aged specimens, and then compared to the corrosion-fatigue characteristics. The width of the backward radiation profile decreases as the increase of the aging temperature, which seems to result from the increase of the effective degrading layer thickness. This parameter also shows an inversely proportionality to the exponent, m, in the Paris law which predicts the crack size increasement due to fatigue. The result observed in this study demonstrates high potential of the backward radiated ultrasound as a tool for the nondestructive evaluation of the corrosion-fatigue characteristics of the aged materials.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.303-303
• /
• 2013

표면에 부착된 나노/마이크로 입자는 다양한 분야에서 오염물질로 작용한다. 특히 형상이 미세하고 공정 단계가 복잡한 반도체 및 디스플레이 등의 전자 소자 공정에서 미치는 영향이 크다. 따라서 입자상 오염물질의 제거에 관하여 상용화된 습식 세정 방법이 다양하게 존재하지만 표면 손상, 화학 반응, 부산물, 세정 효율 등 여러 가지 문제점이 있어 새로운 세정 방법이 요구된다. 이에 건식 세정 방법, 그 중에서도 입자의 충돌을 통해 제거하는 방법인 에어로졸 세정, 필렛 세정 등이 개발되었으나 마이크로 크기로 생성되는 입자로 인하여 형상의 손상이 크다. 따라서 본 연구에서는 나노 단위로 기체/고체 혼합물만 생성하여 세정하는 가스 클러스터 세정 방법을 이용하여 이러한 문제점을 해결하고자 하였다. 클러스터 세정 장비를 이용한 표면 처리는 충돌에 의한 제거에 기반한다. 따라서 생성 및 가속되는 클러스터로부터 대상으로 전달되는 운동량의 정도가 세정 특성에 영향을 미치며 이는 생성되는 클러스터의 크기에 종속적이다. 생성 클러스터의 크기 분포는 분사 거리, 유량, 분사 각도, 노즐 냉각 온도 등의 변수에 관한 함수이다. 따라서 본 연구에서는 $CO_2$ 클러스터를 이용한 세정 특성을 정의 및 제어하기 위하여 생성되는 클러스터 특성에 관하여 이론적, 수치 해석적, 실험적 연구를 수행하였다. 먼저, $CO_2$의 물리적 특성 및 이를 이용한 특정 크기 오염 물질을 제거하는데 요구되는 임계 클러스터 크기 계산을 이론적으로 구하였다. 이는 오염물질의 부착력과 클러스터의 운동량 전달에 의한 제거력의 비교를 통해 이루어졌다. 두 번째로 클러스터 크기분포를 수치 해석적으로 예측하기 위하여 각 조건에 대하여 유동해석을 수행하고 이를 통해 구해진 노즐 내 기체의 냉각 속도를 GDE (General Dynamic Equation) 계산에 대입하여 구하였다. 마지막으로 PBMS(Particle Beam Mass Spectrometer)를 이용하여 실험적으로 클러스터 크기분포를 각 조건에 대하여 구할 수 있었다. 또한 크기 분포 경향에 대한 간접적 확인을 위하여 포토레지스트가 코팅된 웨이퍼에 클러스터의 충격으로 생성된 크레이터 크기의 경향을 분석하였다. 이와 같은 방법에 의하여 생성되는 클러스터는 노즐의 유량 증가, 온도 상승에 각각 비례하여 작아지는 것을 확인할 수 있었다.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.449-457
• /
• 2016

A stoneware bottle was recovered from the Incheon Yeongheungdo Shipwreck in 2013. Primary observations showed that this object had a sealed opening and was covered with a foreign material. After it was cleaned via mechanical and chemical methods, wave patterns were observed on the outer surface of the bottle and a yellowish-brown transparent material was found within. In this paper, the process of conserving the stoneware bottle and the analysis conducted on the unknown material found within is explained. The conservation process included steps such as cleaning, desalination and restoration. After of the missing area located at the rim, the original shape of the bottle was made clear. In addition, the unknown inner material was analyzed using FT-IR and GC-MS. Results showed that the material is similar to golden lacquer. It is speculated that the Yeongheungdo Ship had wrecked during the Unified Silla period while carrying a bottle loaded with golden lacquer.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.4
• /
• pp.202-208
• /
• 1999

Composite cathodes of $50/50\;vol\%$ LSM-YSZ $(La_{-x}Sr_xMnO_3-yttria\;stabilized\;zirconia)$ were deposited onto dense YSZ electrolytes by colloidal deposition technique. The cathode characteristics were then examined by scanning electron microscopy (SEM) and studied by ac-impedance spectroscopy (IS). The conditioning effects on LSM-YSZ cathodes were seen and remedies for these effects were noted in order to improve the performance of a solid oxide fuel cell (SOFC). The effects of temperature on impedance, surface contamination on cathode bonding to YSZ electrolyte, changing Pt paste, aerosol spray technique applied to curved surface on microstructure and cell to cell variability were solved by testing at $900^{\circ}C$, sanding the YSZ surface, using only one batch of Pt paste, using flat YSZ plates and using consistent procedures and techniques, respectively. And then, reproducible impedance spectra were confirmed by using the improved cell and the typical spectra measured for an (air)LSM-YSZ/YSZ/LSM-YSZ(air) cell at $900^{\circ}C$ were composed of two depressed arcs. Impedance characteristics of the LSM-YSZ cathodes were also affected by experimental conditions such as catalytic interlayer, composite cathode compositions and applied current.