• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.366-370
• /
• 2013

The effects of the early tree shapes with renewal by top-working on Y-shaped peach tree, and the influence on the maintaining fruit quantity with gradual renewal of interstock cultivar were determined. In the comparison of the places of top-working tree, top working tree on the inside of the main branch of interstock cultivar had higher graft union rate and branch growth than those of top working tree on the outside. Tree width, basal diameter of shoot, and number of bearing shoots were smaller in top working tree than in replanted tree. Although labor time was not different to control top working tree and replanted tree, labor time was much required to manage top working tree with interstock cultivar. Accumulated fruit production was 2,384 kg/10a in top working tree and 2,025 kg/10a in replanted tree for three years. However, top working tree had no loss of fruits because interstock cultivar of top-working tree had 3,727 kg/10a of fruits. No variation on fruit quality was observed between top working tree and replanting tree. In terms of economic value of top-working tree, labor to manage interstock cultivar, fertilizer price, fruit bagging, and grading and packing price increased. However, fruit production increased, and price of seedling, rental equipment, pulling-out trees, and repairing supporting system decreased. Therefore, gradual renewal of topworking tree has effects on the maintaining fruit quantity, supplementation on fruit loss, and renewal cultivar.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1996.11a
• /
• pp.69-69
• /
• 1996

• Research in Plant Disease
• /
• v.8 no.4
• /
• pp.254-257
• /
• 2002

It was conducted to investigate an effective control measure of the black necrotic leaf spot disease on pear, The disease commonly occurred in major cultivation areas of Korea revealed 5.6 ％ infection rate on the widely growing cultivar Niikata. The disease substantially reduced yield and quality of pear fruits, however, it has never been controlled by chemicals. Renewal of the pear trees to resistant cultivar was found to be the most effective to control the disease. As a result, the disease did not developed for 2 years on the diseased Niikata that was top-grafted with resistant cultivars Soowhang and Whasan. lop-grafting with resistant cultivars was recommended far the pear trees showing over 80％ infection rate and lower than 70% fruit yield compare to standard production.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.240-243
• /
• 2002

반도체 소자의 고속화， 고접적화에 따라 집적회로의 최소 선폭이 감소할수록 device 의 신호지연, 잡음 및 전력소모 등이 증가하는 문제점이 있다. 이러한 문제점을 개선하기 위해서 저유전율의 층간 절연막이 절대적으로 필요하다. 본 실험에서는 KrF laser 조사를 이용한 표면개질 방법으로 다공성 절연막의 박막특성의 향상을 시도하였다. 다공성 절연막을 층간 절연막으로 응용할 경우 반도체 공정 적용성을 향상시키기 위하여 다공성 절연막의 표면개질이 필요하다. 표면개질 전후의 유전율 변화는 박막을 MIM구조로 측정하였고 화학 구조의 변화는 time-of flight secondary ion mass spectrometry(TOF-SIMS)를 이용하여 관찰하였다. 다공성 실록샌 물질의 pore로 인해서 생긴 누설전류 및 흡습 문제를 개선시키고 유전율을 감소시킬 수 있는 것을 알 수 있었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.22-22
• /
• 2000

DRAM의 고접적화에 따라 기존의 반도체 공정에서 사용중인 여러 가지 기술들이 대부분 그 한계를 보이고 었으며, 대표적인 것이 캐퍼시터 형성기술이다. 따라서 1G DRAM급 이상의 초고집적 회로를 실용화하기 위해서 유전율이 높은 BST ($BrSrTiO_3$) 박막을 이용하여 캐패시터를 제조하려는 기술도 반드시 해결되어야 현재 활발히 실용화 연구가 진행중에 있다. BST 박막을 제조하는 방법은 RF magnetron sputtering, Ion beam reactive co-evaporation, LSM (Liquid Source Misted) CVD, MOCVD 등의 법으로 제조되고 있다. 본 연구에서는 전기-수력 학적 분무(Electro-Hydrodynamic Spray)현상을 이용한 MOCVD에 BaO, SrO, $TiO_2$ 박막을 증착 하여 전기장세기, 기판온도, 시간 등에 따른 특성을 조사하였다. 전기수력학적 분무를 이용한 증착법은 원료를 함유하는 용액을 이용함으로써 이송관의 가열이 필요 없이 장치를 간단하게 할 수 있고, 용액의 유량과 전기장의 세기에 따라 초미세 입자제어도 가능하며, 박막의 조성을 출발 용액으로 부터 조절하는 등의 특징을 가지고 있다. 증착한 박막의 표면, 단면 형상 및 조성을 분석하였고 결정화 여부 및 우선 배향성을 조사하였다. 현재는 개별 박막의 표현 형상과 조성에 대한 연구 결과를 얻었으며, 계속해서 박 막의 여러 특성에 대하 연구할 계획이다.

• Horticultural Science & Technology
• /
• v.19 no.1
• /
• pp.43-47
• /
• 2001

This study was conducted to investigate the integrated control strategy against pear black leaf spot disease. Using indicator plant PS-95 we selected six virus-free trees (cv. Niitaka) from commercial orchards in the major pear production area. Disease symptom by pear black leaf spot in the shoot of pear (Niitaka) has been successfully inhibited by heat treatments for 3 weeks at temperature of $40^{\circ}C$ (day) and $32^{\circ}C$ (night) or 4 weeks at $37^{\circ}C$ and $30^{\circ}C$, respectively. However, survival rate of the shoot tips on stocks was low. Seven cultivars Niitaka, Imamura- aki, Waseaka, Nijisseiki, Wasenijisseiki, Shinsetsu and Whangkeumbae produced visible symptoms in the first year after inoculation with the virus. Other 11 selections remained symptomless. Two resistant cultivars Suwhangbae and Gamcheonbae were selected, which showed high fruit quality. It is recommended that these cultivars could be top-grafted onto the infected Niitaka trees to overcome the damage caused by the disease in the orchard.