• Journal of the Korea Concrete Institute
• /
• v.23 no.4
• /
• pp.503-509
• /
• 2011

ECC is a micro-mechanically designed cementitious composite which exhibits tightly controlled crack width and strain hardening behavior in uniaxial tension while using a moderate amount of reinforcing fiber, typically less than 2% fiber volume fraction. Recently, a variety of applications of this material ranging from repair and retrofit of structures, cast-in-place structures, to precast structural elements requiring high ductility are developed. In the present study, a retrofitting method using ECC reinforced with high strength rebar was proposed to enhance load-carrying capacity and crack control performance of deteriorated reinforced concrete (RC) beams. Six beam specimens were designed and tested under a four-point loading setup. The flexural test revealed that load-carrying capacity and crack control performance were significantly enhanced by the use of ECC and high strength rebar. This result will be useful for practical field applications of the proposed retrofitting method.

• Journal of the military operations research society of Korea
• /
• v.35 no.2
• /
• pp.33-49
• /
• 2009

The objective of this study is as follows. First, the hazard function on the failure probability density function of the K-1 tracked vehicles can be occurred in the form of the bathtub curve. Second, the failure mode may be different under two different operational situations. The research result shows that the bathtub curve can be fitted in the Weibull distribution, that assumes different shapes according to the specific stage of the system's life cycle. The K-1 tracked vehicle has a relatively high hazard(failure) rate at the time of its first service. The failure rate starts decreasing for a time immediately after it goes into service. After the break-in period, the surviving components have a fairly constant hazard rate. As the K-1 system ages, deterioration of its various parts takes place and the hazard rate starts Increasing. Second, the result shows the failure rate in the harsh operational environment is higher than that in the mild operational environment. In conclusion, the bathtub curve can be logically appropriate in establishing the depot overhaul cycle. Moreover, it is necessary for determining the right time of the depot overhaul to consider not only the age of defense equipment but also the different operational environment.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.4 s.346
• /
• pp.49-55
• /
• 2006

In this paper, a fault dictionary for fault locations is considered. The foremost problem in fault diagnosis is the size of the data. As circuits are large, the data for fault diagnosis increase to the point where they are impossible to be stored. The increased information makes it impossible to store the dictionary into storage media. In order to generate the dictionary, j.e. pass-fail dictionary some dictionaries store a portion of the information. The deleted data makes it difficult to diagnose fault models except single stuck-at fault. This paper proposes a new dictionary format. A new format makes a dictionary small size without deleting any informations.

• Journal of KIISE:Software and Applications
• /
• v.32 no.12
• /
• pp.1178-1191
• /
• 2005

In this paper, we propose a synthesis method of software fault tree from software requirements specification written in NuSCR formal specification language. The software fault tree, proposed in this paper, reflects requirements on both structure and behavior and it is an integrated form. The software fault tree can be used for analyzing safety in the view of structure and behavior. We propose templates for each components in NuSCR specification language and a synthesis method of software fault tree using the templates. The research was applied into the main trip logic of the reactor protection system of ARP1400, the Korean next generation nuclear reactor system, developed by KNICS. And we evaluate feasibility of our approach through this case study.

• The Microorganisms and Industry
• /
• v.14 no.3
• /
• pp.23-26
• /
• 1988

자연계에 있어서 질소는 대기중의 분자상질소를 비롯하여 초산, 암모니아와 같은 무기태질소, 단백질, 핵산 등의 유기태질소 등 다양한 형태로 존재하며 생물권내에서 흡수, 고정, 대사, 분해되는 등 다양한 순환을 거듭하고 있다. 대기중의 분자상질소는 Rhizobium, Azotobacter, Klebsielle, Clostridium, Blue-green algae 및 광합성세균 등에 의해 고장되어 암모니아의 형태로 환원된다. 한편 대부분의 식물들은 초산이나 암모니아 형태의 질소를 흡수 동화하여 핵산, 단백질을 만들고 이들 구성물은 사후 암모니아로 재분해 된다. 또한 동식물의 유체내지는 배설물들도 각기 분해되어 암모니아의 형태로 변화되는데 이와같은 일련의 질소순환(nitrogen cycle)은 초화세균, 탈질세균 내지는 질소고정균등 대부분의 미생물에 의해 크게 지배를 받고 있다.

• Journal of Hydrogen and New Energy
• /
• v.31 no.1
• /
• pp.65-72
• /
• 2020

In this study, the purpose is to identify the risks of the facilities of packaged hydrogen stations. As a risk identification method, failure mode & effect analysis (FMEA), a qualitative risk assessment, was used to analyze failure mode and effects of component of each facility. The analysis criteria were used to derive the risk priority number (RPN) using the 5-point method according to severity, incidence, and detectability. The study analyzed a total of 141 components of 23 types that can be identified on the design of the packaged hydrogen filling station. As a result, 683 types of failures and their causes and effects were identified. and the RPN was number of a total of 1,485. Of these, 10 failure types with a RPN value of 40 or more were deemed necessary. In addition, a list of failure types with a severity score of 5 was identified and analyzed.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.9
• /
• pp.493-502
• /
• 2002

The connectivity and edge-connectivity have been the prime deterministic measure of fault tolerance in multicomputer networks. These parameters have a problem that they do not differentiate the different types of disconnected graphs which result from removing the disconnecting vertices or disconnecting edges. To compensate for this shortcoming, one can utilize generalized measures of connectedness such as superconnectivity, toughness, scattering number, vertex-integrity, binding number, and restricted connectivity. In this paper, we analyze such deterministic measures of fault tolerance in recursive circulants and hypercubes, and compare them in terms of fault tolerance.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.51-51
• /
• 2017

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.863-865
• /
• 2004

• Korean Journal of Food Science and Technology
• /
• v.41 no.6
• /
• pp.717-721
• /
• 2009

The anti-allergic effect of the methanol extract of Zizania latifolia Turcz was investigated. Methanol extract of Z. latifolia Trucz did not display any cytotoxicity activities in the IgE-sensitized RBL-2H3 cells. The extract was found to inhibit compound 48/80-induced degranulation and antigen-induced $\beta$-hexosaminidase release as well as PMA plus A23187-induced TNF-$\alpha$ production in RBL-2H3 mast cells in a dose-dependent manner. Release of $\beta$-hexosaminidase, a marker for the release of histamine in mast cells, was inhibited with an $IC_{50}$ value of $73.8\;{\mu}g/mL$. These results suggest that Z. latifolia extracts may be useful for the prevention of type I allergic reaction.