• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.142-148
• /
• 2014

Krylov-Schur iteration method has been applied to the 3-Dim. resonant cavity of a cylindrical form. The vector Helmholtz equation has been analysed for the resonant field strength in homogeneous media by FEM. An eigen-equation has been constructed from element equations basing on tangential edges of the tetrahedra element. This equation made up of two square matrices associated with the curl-curl form of the Helmholtz operator. By performing Krylov-Schur iteration loops on them, Eigen-values and their modes have been determined from the diagonal components of the Schur matrices and its transforming matrices. Eigen-pairs as a result have been revealed visually in the schematic representations. The spectra have been compared with each other to identify the effect of boundary conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.240-240
• /
• 2003

V-노치 균열에서 열하중이 작용하는 경우는 비제차형 경계조건의 문제가 되고, 이 조건에 대한 방정식의 일반해를 구하기 위해서 재차형 연립방정식에 대한 일반해(Homogeneous solution)와 비제차형 연립방정식에 대한 특수해(Particular solution)의 두 가지 해를 구할 수 있다. 이들 해는 V-노치 균열에 대한 고유치가 되고 이 고유치가 중복근을 가지게 되는 경우에는 로그항(1n[r])이 나타나게 되고 이 항에 의해서 응력을 무한대로 발산시키므로 이를 대수응력특이성이라 한다. 열하중이 작용할 때 대수응력특이성을 나타내는 로그항의 계수가 영(0)이 되어 대수응력특이성이 사라지게 되므로 V-노치 선단에서의 응력특이성은 고유치와 그에 대한 고유벡터에 의해 결정된다. 본 논문에서는 비정상상태 열하중이 가해지는 등방성 이종재료 내의 V-노치 균열문제에서 패기 각도와 이종재료의 기계적 성질에 의해 결정되는 응력특이성지수를 구하고 이에 대한 응력강도계수를 유한요소해석 프로그램인 ANSYS와 상반일 경로 적분법(RWCIM)을 이용하여 구하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.159-161
• /
• 1991

보는 토목, 건설, 기계, 선박, 항공등 각종 구조공학 관련분야에서 가장 기본이 되는 구조단위 중에 하나이다. 구조물에서 단면을 변단면으로 하는 경우에는 재료가 절약되는 경제적 잇점이 있을 뿐만 아니라 미적 감각등 여러가지 이유로 변단면을 많이 사용하는 추세이다. 이 논문은 변단면 보의 자유진동을 해석한 결과를 통계적으로 처리하여 변단면 보의 고유진동수를 산정할 수 있는 고유진동수 방정식을 추정하는데 연구목적이 있다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.4
• /
• pp.1-8
• /
• 1989

The main purpose of the present paper is to present both the fundamental frequency and some higher free vibration frequencies for circular arches with variable section, in which rotatory inertia is included. The differential equations are derived for the in-plan free vibration of elastic circular arches with variable section. These equations were solved numerically for the linear variable circular cross-section with clamped-clamped end constraint. As the numerical results, the four lowest nondimensional natural frequencies presented as functions of the nondimensional system parameters : the end moment of inertia to crown moment of inertia ratio, the slenderness ratio, and the opening angle. The effect of rotatory inertia on the nondimensional natural frequency is also reported.

• Journal of the Korean Institute of Gas
• /
• v.20 no.6
• /
• pp.58-64
• /
• 2016

Vibrational characteristics of curved pipe structures are investigated with respect to the change of inside flow velocities. Based upon the Hamilton's principle, the equations of motions are derived, and the finite element equation is constructed to solve the frequency equation for curved pipe structures. When the initial tension is neglected in cured pipes, the natural frequencies are reduced as flow velocity increases, and the rapid decreases of the natural frequencies take place. However, when the initial tension is taken into account, the natural frequencies are not changed with the change of the flow velocity. In free vibrational simulation of pipe systems, it is necessary to calculate the initial force due to the velocity and the pressure of the fluid flow from the equilibrium. The force should be included in the equation of motion of the systems to get more accurate natural frequencies. The mechanical properties like stiffness or the location of pipe support need to be changed to avoid resonance. The natural frequencies are to be isolated from the frequency range of dominant vibration modes. The angles of elbows do not affect the change of the fundamental natural frequency, but affect the change of the third or higher natural frequencies.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.6
• /
• pp.42-50
• /
• 1996

이 논문은 step기둥의 자유진동 및 좌굴하중에 관한 연구이다. 축하중을 받는 변단면 기둥의 자유진동을 지배하는 편미분방정식을 이용하여 축하중을 받는 step기둥의 자유진동을 지배하는 상미분방정식을 유도하였다. 또한 이 자유진동을 지배하는 미분방정식을 이용하여 step기둥의 좌굴하중을 지배하는 상미분방정식을 유도하였다. 유도된 미분방정식들을 Heun방법과 Regula-Falsi방법을 이용하여 고유진동수 및 좌굴하중을 산출할 수 있는 수치해석방법을 개발하였다. 실제 수치해석 예에서는 2개의 step구간을 갖는 회전-회전, 회전-고정, 고정-고정 기둥에 대한 무차원 고유진동수화 무차원변수들과의 관계 및 무차원 좌굴하중과 무차원 변수들과의 관계를 그림에 나타내었다.

• Computational Structural Engineering
• /
• v.9 no.1
• /
• pp.133-139
• /
• 1996

In this paper, an approximate method is developed to obtain the natural frequencies of the out of plane vibration of circular curved beams. The governing differential equations are derived using the dynamic equilibrium equations with the Timoshenko theory, and solved numerically. The Runge-Kutta method and Regula-Falsi method are used to integrate the differential equations and to determine the natural frequencies, respectively. In numerical examples, the hinged-hinged and clamped-clamped end constraints are considered. For each case, the four lowest natural frequencies are reported as functions of four non-dimensional system parameters.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.227-238
• /
• 1988

The curved structures in space, such as multi-level inter-changes, ramped structures, and circular curved structures etc., are modelled as helically curved members with constant helix angle in this study. Equilibrium equations are derived, considering the geometrical properties and initial curvatures of helix. Modal equations of the simply supported helically curved members which can calculate the normalized natural frequencies are derived from these equations by assuming the modal shape function. These equations are used to calculate the normalized natural frequencies of the simply supported helically curved members and verify the distribution of the natural frequencies of them.

• Computational Structural Engineering
• /
• v.7 no.3
• /
• pp.115-122
• /
• 1994

Design sensitivity analysis of the second order perturbed eigenproblems for random structural system is presented. Dynamic response of random system including uncertainties for the design variable is calculated with the first order and second order perturbation method to original governing equation. In optimal design methods, there is fundamental requirement for design gradients. A method for calculating the sensitivity coefficients is developed using the direct differentiation method for the governing equation and first order and second order perturbed equation.

• Journal of Korea Water Resources Association
• /
• v.31 no.6
• /
• pp.757-768
• /
• 1998

rate of outflow is equated to the total rate of flow, both the state equation and its linearized equation yield almost identical oscillations of water levels. This shows that effects of pipe resistance on the surges are small, and justifies a free oscillation analysis. Free oscillation equation has six eigen modes of different periods, including a rigid mode which is existed when the pumped rate of outflow differs from the total rate of inflow. The six modes constitute a variety of surges dependent on different inflow and outflow conditions. Presence of the rigid mode needs sophisticated pump operations adjusted to real flood inflows.