• Management & Information Systems Review
• /
• v.33 no.5
• /
• pp.249-260
• /
• 2014

This paper explores the relationship between firm-specific volatility and some firm characteristics such as size, the market-to-book ratio of equity, PER, PBR, PCR, PSR and turnover in KOSDAQ market. In addition, I investigate whether portfolios with difference to realized range-based volatility and firm-specific volatility have different investment performance using CAPM and FF-3 factor model. The main findings of this study can be summarized as follows. First, firm-specific volatility have mostly positive relationship between firm-specific volatility and some firm characteristics. Second, this study found that realized range-based volatility and firm-specific volatility are positively related to expected return. It means that portfolios with high idiosyncratic volatility have significantly higher expected return than portfolios with low firm-specific volatility.

• Restorative Dentistry and Endodontics
• /
• v.34 no.6
• /
• pp.477-483
• /
• 2009

The purpose of this study was to compare the microleakage of low and high viscosity flowable resins in class V cavities applied with 1-step adhesives. Forty Class V cavities were prepared on the cervices of buccal and lingual surfaces of extracted molar teeth and divided into four groups (n=8). Cavities were restored with AQ Bond Plus /Metafil Flo $\alpha$, G-Bond/ UniFil LoFlo Plus (Low flow groups), AQ Bond Plus/Metafil Flo and G-Bond/UniFil Flow (High flow group), respectively. Specimens were immersed in a 2% methylene blue solution for 24 hours, and bisected longitudinally. They were observed microleakages at the enamel and dentinal margins. In conclusion, the low viscosity flowable resins showed lower marginal microleakage than do the high vis cosity flowable resins in class V cavities.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.335-338
• /
• 2001

잔향음은 시변동성이 존재하는 유동성 경계면 잔향음(해수면, 체적)과 시변동성이 존재하지 않는 고정 경계면 잔향음(해저면)으로 분류된다. 그러나 고정 경계면 잔향음으로 알려진 해저면 잔향음에서도 단주기적 시변동성이 존재하고 있음이 여러 실측자료에서 관측되고 있다. 본 연구는 시변동성의 원인을 파악하고자 실험실에서 부유성 퇴적물의 농토에 따른 후방산란 신호를 측정하였다. 또한 동해에서 측정된 시간에 따른 잔향음신호(80kHz)와 ADCP(4.2MHz) 자료를 비교하여 천해에서의 체적 산란체의 변동이 잔향음 신호에 영향을 미칠 수 있음을 확인하였다. 아울러 본 논문에서는 잔향음 신호의 단주기적 시변동성에 의한 잡음 성분을 제거하여 표준화된 잔향음 신호를 획득하기 위한 방법으로 Low Rank Approximation(LRA)을 제안하였다. 이 기법은 특이해 분해(Singular Value Decomposition, SVD)를 수행하여 실측 자료 행렬로부터 고유치(Eigenvalue)과 고유벡터(Eigenvector)를 추출한 후, 추출된 고유치를 제한적으로 사용하여 근사화 하는 기법으로 시변동성 신호를 제거하는데 효율적인 방법이다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.2
• /
• pp.124-134
• /
• 2013

This study investigated the effect of surface water on concrete substrate on adhesive strength in tension of very high flowable SBR-modified cement mortar. The specimens were prepared with proportionally mixing SBR latex, ordinary portland cement, silica sand, superplasticizer and viscosity enhancing agent. Polymer cement ratio (P/C) were 10, 20, 30, 50 and 75% and the weight ratio of fine aggregate to cement were 1:1 and 1:3. The specimens obtained with different P/C and C:F were characterized by unit weight, flow test, crack resistance and adhesion test. After basic tests, two mixtures of P/C=20% and 30% in case of C:F=1:1, and one mixture of P/C=50% in case of C:F=1:3 were selected, respectively. These three selected specimens were studied about the effect of surface water evenly sprayed on concrete substrate by a amount of 0, 0.006, 0.012, 0.017, 0.024g per unit area ($cm^2$) of concrete substrate surface The results show that surface water on concrete substrate increases the adhesive strength in tension of high flowable SBR-modified cement mortar and improve the flowability compared to the non-sprayed case.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.5
• /
• pp.94-104
• /
• 2013

Experiments were divided into two parts; one part is to understand the basic properties of high flowable VA/VeoVa-modified cement mortar with different polymer cement ratio (P/C) and the weight ratio of fine aggregate to cement (C:F) and the other part is to investigate the effect of surface water spread on the concrete substrate on adhesion in tension. To understand the basic performance, the specimens were prepared with proportionally mixing VA/VeoVa redispersible powder, ordinary portland cement, silica sand, superplasticizer and viscosity enhancing agent. Here, P/C were 10, 20, 30, 50 and 75% and C:F were 1:1 and 1:3. As the change of P/C and C:F unit weight, flow test, crack resistance and adhesion in tension were measured. Three specimens with good adhesion properties were selected among specimens with different P/C and C:F. The effect of surface water evenly sprayed on concrete substrate on adhesive strength is investigated. The results show that surface water on concrete substrate increases the adhesion in tension of high flowable VA/VeoVa-modified cement mortar and additionally improves the flowability compared to the non-sprayed case.

• Cement Symposium
• /
• no.30
• /
• pp.274-286
• /
• 2003

• Cement Symposium
• /
• s.37
• /
• pp.229-235
• /
• 2010

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.51-52
• /
• 2015

In this study, the concrete in which the hybrid fiber with different volume and rate was intermixed in high fluidity concrete. However, Fiber Ball is frequently caused by the decrease in the dispersion of the fiber. The research has been conducted primarily study of single fiber or hybrid fiber, such as different length of single fiber. Therefore, we investigate the mechanical properties of concrete was mixed with a combination of various fibers been produced domestically. Its purpose being to provide basic data for evaluating the impact hybrid fibers on the fluidity of concrete.

• Magazine of RCR
• /
• v.16 no.3
• /
• pp.39-44
• /
• 2021

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.2
• /
• pp.19-31
• /
• 2018

Recently the ground subsidence which seriously weakens the safety of cities tends to increase. The purpose of this paper is to develop the materials by using industrial by-products for the application to emergency restoration process in case of ground subsidence. In this paper the laboratory tests including pH test, initial setting test, unconfined compressive strength test, and flow test were performed in order to evaluate the design properties of Controlled Low Strength Material (CLSM). The field test was carried out for evaluating the performance for the early strength of CLSM and the workability for emergency restoration. Test results showed that the strength will be too high to re-excavate the ground when the cement ratio is more than 4%. The optimum mixing ratio appears to be most effective when the mixing ratio of the bottom ash and the gypsum is approximately 50:50 and the cement content is 2%.