• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.379-382
• /
• 2019

Synthesis of gold nanoparticles (NPs) made an aqueous environment via the reduction of HAuCl₄ by ascorbic acid (AC) with the surfactant of polyvinylpyrrolidone (PVP). Highly monodisperse gold particles with size ranges from 4 to 20 nm were prepared in high-yield by pH control. The synthesized gold nanoparticles were analyzed for structural and optical properties using transmission electron microscopy (TEM) and UV-vis spectroscopy. In this study, we could reveal that the prepared nanoparticles exhibited efficient surface-enhanced Raman scattering (SERS) properties, and their SERS activities depends on size.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.3
• /
• pp.223-227
• /
• 2001

In this paper, the authors present the fabrication of high-yield Si thin-membranes by electrochemical etch-stop in tetramethyl ammonium hydroxide (TMAH): isopropyl alcohol (IPA):pyrazine solutions. The current-voltage (I-V) characteristics of n- and p-type Si in TMAH:IPA;pyrazine solutions were analysed, repsectively. Open circuit potential (OCP)and passivation potential (PP) of n- and p-type Si, respectively, were obtained and applied potential was selected between n- and p-type Si PPs. The electrochemical etch-stop method was applied to the fabrication of 801 micro-membranes with 20.0 $\mu\textrm{m}$ thickness on a 5" Si wafer. The average thickness of fabricated 801 micro-membranes on one wafer 20.03$\mu\textrm{m}$ and the standard deviation was ${\pm}$0.26$\mu\textrm{m}$. The Si surface of the etch-stopped micro-membranes was extremely flat with no noticeable taper or nonuniformity. The results indicate that use of the electrochemical etch-stop method for the etching of Si in TMAH:IPA;pyrazine solutions provides a powerful and versatile alternative process for fabricating high-yield Si micro-membranes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.455-455
• /
• 2011

탄소나노튜브(CNT)는 우수한 전기적, 화학적, 기계적 특성으로 인해 전자기술 분야에 있어서 많은 응용이 가능한 나노소재로 각광을 받고 있으며, 실질적으로 CNT를 이용하여 트렌지스터, 전계방출원, 이차 전지 등으로의 응용연구가 진행되고 있다. 일반적으로 CNT 합성을 위해 전이금속의 촉매가 필요하며 또한 촉매가 나노입자로 형성이 되어야 CNT 합성이 가능하다. 기존에는 CNT 합성기판으로 실리콘 웨이퍼 위에 완충층(buffer layer)과 촉매층을 증착하여 사용하였다. 완충층은 촉매가 기판의 내부로 확산하는 것을 막아주며, 촉매의 나노입자 형성을 원활히 함으로 고효율 합성과 구조제어를 가능하게 한다. 그러나 사용되는 완충층은 알루미나 또는 실리콘 산화막과 같은 절연막이기 때문에 CNT 고유의 우수한 전기전도도를 그대로 이용할 수 없다는 문제가 있다. 그러므로 보다 폭넓은 응용을 위해서는, 완충층의 사용없이 전기전도도가 좋은 금속기판에서 CNT를 직접 합성시키는 것이 중요하며, 이때 적절한 크기의 촉매 나노입자를 형성시키기 위한 각종 표면처리법 등이 현재까지 연구되어 왔다. 본 연구에서는 Inconel 600 합금을 합성기판으로 하여 CNT의 고효율 합성에 대하여 연구하였다. 촉매의 나노입자 형성을 위하여 고온 산화처리 및 플라즈마 이온조사처리 등을 실시하였으며, CNT의 고효율 합성에 미치는 영향을 조사하였다. 결과로서, 두 종류의 전처리를 혼합하여 처리한 Inconel 600 기판에서 높은 밀도의 미세한 나노입자가 형성되었고, CNT의 고효율 합성까지 얻을 수 있었다. 이는 Inconel 600 고유의 표면산화특성 및 플라즈마 이온조사에 따른 표면구조 변화가 그 원인으로 사료된다. 발표에서는 고효율 합성결과 및 합성기전에 대하여 보다 자세히 토의하고자 한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.149-156
• /
• 2008

Recently, ozone is utilized in various fields and its needs are expanding. In this paper, plate type ozonizer have been fabricated to investigate discharge parameter(input power, flow rate of supplied gas, electrode form, etc.) effect to discharge. And the conditions of discharge parameter have been investigated for optimum ozone generation. Ozone concentration is continuously increased with increasing input power for same discharge space, and ozone yield is also increased until maximum point after that it is saturated. Ozone concentration is inversely proportional to flow rate of supplied gas but ozone generation and ozone yield characteristics are improved.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2141-2143
• /
• 2000

In this paper, high concentration yield multi-discharge type ozonizer (MDO) of new discharge type using superposed silent discharge was designed and manufactured, MDO can be consisted with 3 kind of multi discharge type ozonizer (MDO) in accordance with power supply method that supplying power, which has 180[$^{\circ}$] phase difference, to 3 electrodes and double gap. At the moment, discharge characteristics and ozone generation characteristics of each MDO were investigated in accordance with quantity of supplied gas, the number of MDO, and the shapes of each MDO. In result, ozone generation characteristics of 17185[ppm] and 783[g/kWh] were obtained, and when ozone of 17185 [ppm] was in contact with dyeing water waste, decolorization characteristics was excellent, so it confirmed that MDO could be used as water environment improvement facility.

• Microbiology and Biotechnology Letters
• /
• v.18 no.1
• /
• pp.66-70
• /
• 1990

A study on 11 $\alpha$-hydroxylation of progesterone by using Rhizopus nigricans was carried out to produce efficiently 11 $\alpha$-hydroxyprogesterone which is an essential intermediate of corticosteroids synthesis. Firstly, medium was optimized in view of bioconversion yield and cell growth. Glucose and casamino acid were selected as carbon and nitrogen source and the ratio of carbon to nitrogen which maximize bioconversion yield was determined to be 2:1. Secondly, the addition time of progesterone and dispersion method were studied. When progesterone dispersed with 0.01% (v/v) Tween 80 was added at 12-14 hr of cultivation, higher bioconversion yield was obtained. When 20g/$\ell$ of progesterone was added, the yield reached 70% under optimized conditions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.71-79
• /
• 1999

In this paper, high concentration.yield trulti-discharge type ozonizer( MDO ) of new discharge type using superposed silent discharge was designed and manufactured MDO can be consisted with 3 kind of superposed silent discharge type ozmizer( SDO ) in accordance with power supply method that suwlying power, which has $180[^{\circ}]$ phase difference, to 3 electrodes and amble gap. At the rroment, discharge characteristics and ozone generation characteristics of each SDO were investigated in accordance with quantity of suwlied gas, the number of SDO, and the shapes of each SDO. In result, ozone generatioo characteristics of 17185[ppm] and 783[g/kWh] were obtained, and when ozone of 17185[ppm] was in contact with dyeing water waste, decolorization characteristics was excellent, so it confinred that MDO could be used as water environment improvement facility.cility.

• KSBB Journal
• /
• v.26 no.1
• /
• pp.13-18
• /
• 2011

In this study, precipitation process was developed for the recovery of the lactic acid from calcium lactate fermentation broth. Calcium lactate yield was improved by decreasing the solubility of calcium lactate through the addition of ethanol (25%, v/v) as a co-precipitant. The optimal lime type, lime concentration, stirrer speed, precipitation time, temperature, and solvent amount for $Ca(LA)_2$ precipitation were CaO, 0.0175 g/mL, 220 rpm, 24 h, $5^{\circ}C$, ethanol 25% (v/v), respectively. Lactic acid was easily and efficiently recovered from precipitated $Ca(LA)_2$ by adding sulfuric acid ($Ca(LA)_2/H_2SO_4$ molar ratio=1:1). In the model solution of organic acids and fermentation broth, the overall yields of recovered lactic acid were 62% and 55%, respectively, under the aforementioned optimal conditions.

• Polymer(Korea)
• /
• v.27 no.5
• /
• pp.429-435
• /
• 2003

Vinyl addition copolymerizations of norbornene (NB) and 5-vinyl-2-norbomene (VNB) were carried out using a cationic η$^3$-allyl palladium catalyst in the various mole ratio of comonomers. The copolymers could be obtained in good yield (65∼85%) with high weight-average molecular weights (M$_{w}$ > 760,000). Depending on increasing VNB contents, the molecular weight and yield of the copolymers decreased. FT-IR analysis confirmed that actual contents of VNB in polymer were proportional to the feeding content of VNB. From $^1$H-NMR spectroscopy, we found that both exo and endo VNB isomer were copolymerized with NB. Thermal stabilities of NB-VNB copolymers were independent on the VNB content and their initial decomposition temperatures were about 300 C. The NB-VNB copolymers were followed by epoxidation by using m-CPBA and hydroxylation by 9-BBN, respectively, and these post-polymers were characterized by FT-IR spectroscopy and $^1$H-NMR analysis..

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.771-776
• /
• 2016

The acrylate copolymer having good thermal stability, coating and adhesion properties was designed and prepared. We prepared copolymers in >95% high yield using methyl methacrylate, isobornyl methacrylate and 2-hydroxyethyl methacrylate monomers by the bulk and emulsion polymerization techniques. The $^1H$-NMR spectrum was used to identify chemical structure and glass transition temperatures increased from $123^{\circ}C$ to $140^{\circ}C$ confirmed by DSC, DMA and TGA analysis. In addition, as the content of IBMA increased, storage modulus and thermal decomposition temperature increased. As the content of IBMA increased from 10% to 30% in the composition for the entire monomer, tensile strength increased from 22 to 30 MPa in both polymers prepared by bulk and emulsion techniques. The contact angle increased from 70 to up to 88 degrees due to hydrophobic property of IBMA.