• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.1 s.24
• /
• pp.71-75
• /
• 2003

The highway is greatly changed by the constant economic growth for a long times the traffic situation such as the large volumes and the performance vehicles, the performance enlargement of vehicles, the high speedization, etc., due to growth economic. A study of an optimal route selection model is researched over late 1980s by development of computer and GSIS, and consisted including research about the optimal route that uses digital terrain model in domestic such as the earth volume calculations, the mass curve output and the automation system construction. Lately, the study of the driving simulation of the highway and the virtual reality using VGIS(Virtual Geographic Information System) is researched. This study shows when the alternative highway selection considered surrounding facilities, development plan and according to estimate amount of traffic and the additional possibility of view analysis and environment effect analysis element will study through 3D simulation method.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.1
• /
• pp.9-18
• /
• 2010

Our country has so large mountain area that the tunnel construction is inevitable and the need of incident detection that provides safe management of tunnels is increasing. In this paper, we suggest a tunnel incident detection system using computer vision techniques, which can detect the incidents in a tunnel and provides the information to the tunnel administrative office in order to help safe tunnel operation. The suggested system enhances the processing speed by using simple processing algorithm such as image subtraction, and ensures the accuracy of the system by focused on the incident detection itself rather than its classification. The system is also cost effective because the video data from 4 cameras can be simultaneously analyzed in a single PC-based system. Our system can be easily extended because the PC-based analyzer can be increased according to the number of cameras in a tunnel. Also our web-based structure is useful to connect the other remotely located tunnel incident systems to obtain interoperability between tunnels. Through the experiments the system has successfully detected the incidents in real time including dropped luggage, stoped car, traffic congestion, man walker or bicycle, smoke or fire, reverse driving, etc.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.362-370
• /
• 2011

This paper presents a K-band radar system installed on the ground moving vehicle to detect and track a high-speed target. The presented radar is separated into three search regions to satisfy a wide area detection and a limitation of the installing space of the radar, and each region performs detecting the target independently and tracking the detected target automatically. The presented radar radiating K-band FMCW waveform acquires range and velocity information of the target at the every dwell and receiving antenna of the radar is applied the multiple baseline interferometer to extract the precise angle information of the target. 3-dimensional tracking accuracy of the radar is 0.25 m RMSE measured actually through a fire experiment of an imitation target.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5430-5437
• /
• 2011

The objective of this study is to investigate the cooling performances of the electrical air-conditioning system using electric driven scroll compressor for zero emission passenger vehicles. This air conditioner with air source was used R-134a as a refrigerant and installed in a real zero emission passenger vehicle for tests under various driving conditions. The cooling performance of the electrical air conditioner was affected by driving velocities and conditions of the tested vehicle. The condensing rate of the condenser during driving is better than that of the idle condition. The average cool down temperature in the cabin room decreased on average $5.2^{\circ}C$ with the increase of the outdoor temperature from $20.0^{\circ}C$ to $30.0^{\circ}C$. In addition, the cooling performances were sufficient for cooling loads of the tested passenger car under tested conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1522-1533
• /
• 2001

In this paper, we handle the estimation method of the received $E_{b}l1_{o}$ for forward closed-loop power control in cdma2000 systems. The estimation of MS-received $E_{b}l1_{o}$ utilizes the symbols related to the forward power control subchannel transmission. The estimation of the received bit energy and noise variance is analyzed for the frequency-selective Rayleigh fading channel. In order to improve SIR (signal-to-interference), the estimation of the received bit energy is made by the coherent combining of the rake-fingers and received I/Q symbols. And, in this paper, we evaluate the performance of forward closed-loop power control according to the mobile speed and the power adjustment step size in terms of the bit error rate (BER) and power control error. Simulation results present the optimal power adjustment step sizes according to the mobile speeds.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.57-62
• /
• 2014

Recently, research activities to develop services for providing safety information to the drivers in fast moving vehicles based on various wireless network technologies such as DSRC (Dedicated Short Range Communication), IEEE 802.11p WAVE (Wireless Access for Vehicular Environment) are widely being carried out. This paper presents a proof-of-concept model based on a robot-car for Dilemma Zone Decision Assistant Service using the wireless LAN technology. The proposed model system consists of a robot-car based on an embedded Linux OS equipped with a WiFi interface and an on-board unit emulator, an Android-based remote controller to model a human driver interface, a laptop computer to run a model traffic signal controller and signal lights, and a WiFi access point to model a road-side unit.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.540-545
• /
• 2007

The tilting train is able to tilt its body towards the center of the turning radius, preventing roll-over of the train as it runs on a curved rail at high-speed. This train, widely accepted for commercial purpose internationally, is very beneficial in that the operating time is shortened without much capital investment to the infrastructure where there are many curved rails. Over several years, the Korea Railroad Research Institute (KRRI) has developed such a train. In this paper, the safety of the Korean tilting train express (TTX) is investigated using a dynamic simulation model. Since proper safety standards have not been established for the TTX, those for the Korean train express (KTX) is employed to analyze the safety and ride comfort of the TTX. This study is useful in predicting the behavior of the TTX and ride comfort, and conforms that designed TTX is stable enough to satisfy the safety standards. It would be useful to recommend proper normal operating speed and determine the maximum safety speed, according to the result. Furthermore, it would be possible to provide basic reference data when analyzing the dynamic effect of the catenary system and the fatigue of the bogie.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.367-373
• /
• 2022

As deep learning-based autonomous driving technology develops, artificial intelligence models for various purposes have been studied. Based on these studies, several models were used simultaneously to develop autonomous driving systems. It can occur by increasing hardware resource consumption. We propose a multi-tasks model using a shared backbone to solve this problem. This can solve the increase in the number of backbones for using AI models. As a result, in the proposed lightweight model, the model parameters could be reduced by more than 50% compared to the existing model, and the speed could be improved. In addition, each lane can be classified through lane detection using the instance segmentation method. However, further research is needed on the decrease in accuracy compared to the existing model.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.3
• /
• pp.116-130
• /
• 2023

Expressways play pivotal roles in cargo transportation because of their superior accessibility and mobility compared to rail and air. On the other hand, there is a limit to the accurate calculation of cargo transportation performance using existing highways owing to the mixture of vehicle types and difficulty in identifying cargo loads of individual cargo vehicles. This paper presents an algorithm for calculating more reliable cargo transportation performance using big data. The traffic performance (veh·km/day) was derived using the data collected from Toll Collecting System. The average tolerance weight for each vehicle type and the cargo load unit (ton/unit) considering it was calculated using vehicle specification information data and high-speed and low-speed axis data. This study calculated the cargo transportation performance by section and type using various online integrated highway data and presented a method for calculating the transportation performance by linking open business offices and private highways.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.05b
• /
• pp.43-48
• /
• 2004

The development of the traffic system has brought relative reduction in aspect of the cost and time distance on the geographical space. SOC(social overhead capital), an express highway and railroad, has a great and absolute effect on the prosperity of community, As Mokpo is one of the community under the influence q West costal highway express and KTX(Korea Train Express), the number of the tourists visiting city of port like Mokpo has increasing gradually, especially at the high-demand season(in Summer). But the coastal passenger boot can't be capable of customers arriving at the port. As a result of this situation, the 'balking' occurs. No 'balking', means the jam of road. In this thesis, by understanding the concept and property of ARENA and simulating operation of coastal passenger boot at Mokpo port, intends to analyze the truth of 'balking' and finds an effective operation method of coastal passenger boot for the solution to the traffic jam. The solution to the jam in the vicinity of port of Mokpo, which try to develop tourism package commodity now, will present the effect of qualitative analysis in giving an opportunity of economic growth of the community, Mokpo.