• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.476-482
• /
• 2009

A signal equipment improvement project for the existing facility ATS to ATP is under construction in Kyung-Bu and Ho-Nam commercial line including 400 rolling stocks. But there was a concern for the interface between KTX OBCS and ATP from the beginning of the project. At present, this is the front burner event. This paper introduces interface checking and predicted failure point between KTX OBCS and ATP improvement system. Through this measure the optimal installation of the ATP will be possible. The study was made under maintenance efficiency including reliability because the KTX signal equipment must qualify the above condition.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.631-645
• /
• 2002

●정의 정척레일을 연속 용접하여 1개의 레일길이를 200m 이상으로 부설한 레일 ●장대레일화 - 차량 시동/제동하중에 의한 교축방향 수평력 작용 - 기존 : 수평력 배분을 위해 단순교로 시공(레일 이음매) - 현재 : 장대레일화 ● 장점 -유지보수비 절감 -승차감 향상(충격/소음 저감) -고속화 및 운행 안전성 향상 ●단점 -큰 레일 축력(파단/좌굴) -교량부, 급곡선부, 분기부 - 장대레일 종하중(하부구조) (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.344-345
• /
• 2002

철도차량은 고속으로 운행되므로 승객의 안전을 위해 객실 창문의 개폐가 불가능하게 되어 있다. 객실은 전체가 밀폐되어 자연환기가 아닌 공조시스템만으로 공기 질이 조절 가능하다. 철도는 주로 장거리 승객이 이용하며, 다수의 승객은 한정된 공간에서 장시간 체류하면서 객실 내에서 발생되거나 외부에서 유입되는 각종 대기오염물질에 노출되고 있다. (중략)

• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.787-792
• /
• 2002

This study presents the wheel wear measurement results of Saemaeul train running on the conventional line. The train set included three different cars which have different shape of wheel profile including KNR and KTX profile currently used in Saemaeul. Train set was operated on Seoul-Pusan line with fixed train set formation for commercial service. Wheel wear measurements were peformed periodically. Here, we describe some results.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.387-392
• /
• 2004

There has been an increasing demand for the noise impact assessment by the high-speed trains due to the expansion of high-speed rails. This paper provides procedures for the evaluation and the assessment of the potential noise impact resulting from proposed high-speed rails. Firstly the official specifications for the railway noise have been reviewed, and the procedures for the initial noise evaluation and the detailed noise analysis have been described.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.510-516
• /
• 1998

Dynamic stability of a high speed train is very important. This paper presents a dynamic stability analysis of K-TGV using Vampire Program. The analysis of stability on this paper is performed in condition of track irregularity, curved track and strong gust. The critical speed of K-TGV is 140m1s, and it is stable when runs on 7000R(cant 150mm) curved track and on linear track with the body exerted 101kN lateral impulse force.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.430-432
• /
• 1999

In this paper, magnetic field inside and outside express railway train is analysed by use of finite element method. We find that high permeability material reduces magnetic field inside train more than thick material. We also know windows in train does not have influence on magnetic field at seat in train.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.730-733
• /
• 2003

In this study, it have been measured the vertical and lateral vibrations of car bodies which have an equivalent conicity of 1/20 and 1/40. Based on the measured data, it is revealed that the wheel, XP-50, which has the equivalent conicity of 1/20 causes the better riding comfort of KTX.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.226-233
• /
• 2000

This study has been performed to develop the practical method to estimate the change of dynamic characteristics of rolling stocks passing on the high speed turnout system. Each part of turnout system are modeled in consideration of alignment, enter angle and amount of deflection and they are used to achieve dynamic analysis with a train model. Analysis results are compared with test results to confirm its validation

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.53-60
• /
• 2002

This paper introduces KTX RCM(Reliability-Centered Maintenance) project which is for development of a decision making support system on the KTX maintenance framework. The functionality of the system is composed of ( i ) Fundamental Data Management, ( ⅱ ) Maintenance Goal Management, ( ⅲ ) Maintenance Program Management, ( ⅳ ) Cost-Effect Analysis, ( v ) Parameter Management. This system may improve existing maintenance Management procedure for rolling stock of KNR.