• Elastomers and Composites
• /
• v.39 no.2
• /
• pp.95-104
• /
• 2004

New compounds were made using various NR/BR blend ratio and oil content to improve mechanical properties of rubber isolator at low temperature. Mechanical properties were investigated as a function of NR/BR blend ratio and oil content. Hardness and tensile modulus generally increased, but tensile strength and elongation at break decreased with increasing BR content. Hardness, tensile modulus and tensile strength decreased, but elongation at break were nearly the same with increasing oil content. The glass transition temperature of NR and BR were found to be $-50^{\circ}C$ and $-90^{\circ}C$ respectively based on the abrupt drops in storage elastic modulus and peak of loss factor. Two distinct transition temperature were observed in NR/BR blend compounds and each transition point was not affected by blend level indicating incompatible nature of NR/BR blend.

• Elastomers and Composites
• /
• v.49 no.4
• /
• pp.275-283
• /
• 2014

Butyl rubber is used as an adhesive and it is mainly used in the form of sheets. The goal of this study is to design an extrusion die for the butyl rubber sheets using computer simulation. The extrusion die for the butylrubber sheets consists of manifold area and land area. In the manifold area, flows are spread from the entrance of the extrusion die to the land area. In the land area, flows become stable to the flow direction and uniform sheet can be obtained. Island area is being installed in the land area to get uniform flow. Four parameters, angle of manifold, length of manifold, length of land and island, were examined in the computer simulation. The optimum geometry of the extrusion die is derived which has a uniform flow in the width direction of the die.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.11
• /
• pp.39-45
• /
• 2011

This study presents the thermal behaviors of glass beads-rubber mixtures depending on the volumetric fraction of each constituent and relative size between them. The transient plane source method is used to measure the effective thermal conductivity of mixtures. The discrete element method (DEM) and the thermal network model are integrated to investigate the particle-scale mechanism of heat transfer in granular packings. Results show that 1) the effective thermal conductivity decreases as the rubber fraction increases, and 2) the relative size between two solid particles dominates the spatial configuration of inter-particle contact condition that in tum determines the majority of heat propagation path through particle contacts. For the mixtures whose volumetric fraction of rubber is identical, the less conductive materials (e.g., rubber particles) with a large size facilitate heat transfer in granular materials. The experimental results and particle-scale observation highlight that the thermal conduction behavior is dominated not only by the volumetric fraction but also the spatial configuration of each constituent.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.136-136
• /
• 2010

본 연구에서는 귀금속 촉매 식각법을 이용하여 고효율의 태양전지 응용을 위한 p형 실리콘 와이어 어레이를 제조 하였다. 실리콘 와이어 어레이를 기판에서 분리하기 위해 고무 상의 고분자인 폴리디메틸실록산 (polydimethylsiloxane)을 스핀 코팅을 이용하여 실리콘 와이어 어레이 위에 증착하였다. 희석제의 함량과 스핀코팅의 회전수에 따라 폴리디메틸실록산의 박막두께를 조절하였으며, 기계적 방법으로 실리콘 와이어 어레이를 기판에서 분리할 수 있음을 보여주었다.

• Elastomers and Composites
• /
• v.49 no.1
• /
• pp.43-52
• /
• 2014

The effect of nanoclay (Cloisite 20A) on the self-adhesion behavior of uncured brominated-isobutylene-isoprene rubber (BIIR) has been studied. The dispersion state of nanoclay into the rubber matrix was examined by SEM, TEM and XRD analysis. The thermal degradation behavior of the filled and unfilled samples was examined by TGA and improvement in the thermal stability of the nanocomposites occurred based on the weight loss (%) measurements. Also, addition of nanoclay enhanced the cohesive strength of the material by reinforcement action thereby reducing the degree of molecular diffusion across the interface of butyl rubber. However, the average depth of penetration of the inter-diffused chains was still adequate to form entanglement on either side of the interface, and thus offered greater resistance to peeling, resulting in high tack strength measurements. The improvement in tack strength was only achieved at critical nanoclay loading above 8 phr. Contact angle measurement was also made to examine the surface characteristics. There was no significant interfacial property change by employing the nanoclay.

• Elastomers and Composites
• /
• v.41 no.2
• /
• pp.125-130
• /
• 2006

To understand the effect of midsole on the bending stiffness of footwear, bending moment is studied with various hardness and thickness of polyurethane(PU) and poly(ethyl one-co-vinylacetate)(EVA) foams which composed in footwear midsole. The initial bending moment of footwear was appeared at $19^{\circ}$ on bending angle of footwear, and this bending angle was not depend on thickness and hardness of midsole. The bending moments of footwear were also increased with increase of the hardness and thickness of misole which were composed in footwear. Increased hardness and increased thickness of foam and midsole also cause a greater bending moment of the sports shoe, respectively.

• The Korean Journal of Rheology
• /
• v.7 no.1
• /
• pp.60-67
• /
• 1995

EPDM/BR 블렌드의 물성에 미치는 커플링결합체의 영향을 조사하였다. N,N＇ -(bis(2-methyl-2-nitroprpyl))-1,6-diamino hexane) (MNPDH)와 bis(3-triethoxysilyl propyl)-tetrasulfide (TESPT)의 두가지 종류의 커플링결합제를 사용하였다. EPDM/BR 블 렌드 및 EPDM/BR/MNPDH 또는 EPDM/BR/TESPT 블렌드의 용융점도, 탄성률 및 tan $\delta$ 를 모세관 점도계, 동적점탄성장치 및 동적응력 완화측정장치로 조사하였다. 동적점탄성 및 형태학적 연구 결과 MNPDH 또는 TESPT를 첨가할 경우 결합고무 함량이 증가하고 카본 블랙의 분산성이 좋아져 가황된 EPDM/BR 블렌드의 인열강도 및 내피로성등의 물성이 향 상되었다.

• Digital Contents
• /
• no.10 s.101
• /
• pp.38-39
• /
• 2001

무선랜의 장점은 무엇보다 말 그대로의 선이 사라진다는 점에 많은 이들에게 매력이 있다. 즉 사무실이나 공장등 제한된 공간안에서 사용하는 랜을 무선화 한다는 것이다. 무선랜 장비는 일종의 기지국 구실을 하는 무선접속장치와 컴퓨터에 꽂는 무선랜 카드 등 두가지로 나눌수 있다. 무선 접속장치는 기존의 유선망과 유선으로 연결돼 있으며, 한대 당 실내의 경우 30-50m, 실외는 200m내에서 13-20명이 동시에 데이터 서비스를 받을수 있다. 이러한 무선랜 시대를 개화 시켜준 것은 무엇보다 대학을 중심으로 하는 무선랜 시장의 성공에 고무된 통신사업자들의 시장진출에서 기인한다.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.429-433
• /
• 2008

Due to the construction technique (or the construction culture) growth in and out of Korea, newly-developed products have been continuously released. Furthermore, all legislation and regulation that the World follows are gradually becoming unified. (e.g. FTA(Free Trade Agreement) with the United States was contracted, and inevitable FTA contraction with EU and China), For this reason, it is considered that Korean fire regulation on building interior materials needs to be reviewed and compared with that of international standard so that it becomes legitimate and reasonable one.

• Journal of Navigation and Port Research
• /
• v.28 no.6
• /
• pp.503-507
• /
• 2004

We prepared EM wave absorbers by using recycled Sr ferrite for GHz frequency, and investigated the effects of carbon additions and preparation temperatures on their EM wave absorption properties. A Sr ferrite EM wave absorber with the ratio of Sr ferrite: silicon rubber: carbon = 80 : 13.6: 6.4 wt% prepared at 7$0^{\circ}C$ showed -24 dB at 9.4 GHz and -23 dB at 5.5 GHz for 2 mm and 3 mm thickness, respectively.