• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.85-85
• /
• 2004

현재 개발이 진행 증인 한국형 표준 고무차륜 AGT 경량전철 차량의 개발시험은 크게 주요 부품에 대한 구성품 시험, 제작 완료된 차량의 완성차 공장시험, 시험선에서의 주행성능시험 둥 3단계로 나누어 실시된다. 이들 중 2번째 단계인 완성차 공장시험은 2량 1편성으로 설계 제작된 시제차량에 대해 개발 요구사항 및 요구사양의 만족도, 시험선에서 본격적으로 수행되는 주행성능시험 전에 인프라(전력공급, 주행선로)와의 인터레이스 만족도를 확인하는 단계이다.(중략)

• Elastomers and Composites
• /
• v.12 no.1
• /
• pp.43-46
• /
• 1977

브롬화 부틸고무는 새로운 연속적(連續的)인 방법(方法)에 의해 제품(製品)의 질(質)이 균일(均一)하고 안정(安定)한 제품(製品)을 얻을 수 있는 바 이것은 소위(所謂) 상품명(商品名)으로 Folysar Bromobutyl X2라 한다. 이 고무는 일반(一般) 부틸고무와는 달리 여러가지 장점(長點)을 지니고 있다. 다시 말하면 일반(一般) 부틸고무에 비(比)해 첫째 가황속도(加黃速度)가 빠르며, 둘째 천연(天然)고무 또는 SBR과 같은 불포화(不飽化) 고무들과 혼합사용(混合使用)이 가능(可能)하며, 셋째 이러한 고무들과의 혼합사용시(混合使用時) 접착력(接着力)도 우수(優秀)하며 마지막으로 글로로프렌이나 EPDM과도 혼합(混合)이 가능(可能)하기 때문에 여러가지 용도(用途)로 사용(使用)할 수 있다. 이러한 점(點)을 참작(參酌)하여 브롬화 부틸고무의 이용도(利用度)는 (1) 타이어중, tubeless 타이어의 inner liner, white side wall, sidewall coverstrip 그러고 라디얼 타이어에 이용(利用)될 수 있고, (2) 내열성(耐熱性)이 요구(要求)되는 고속용(高速用) 또는 heavy-duty 타이어의 튜우브, 자동차(自動車) 부품(部品) 예(例)컨대 mount등(等)에 이용(利用)할 수 있을 뿐만 아니라 행크 라인닝, 고무 호오스, 콘베어 고무벨트, 의료용 병마개, 접착제등(等)에 광범위(廣範圍)하게 이용(利用)할 수 있다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1669-1674
• /
• 2012

A commonly analytical estimation of fatigue life on rubber components is using fatigue life equation based on various fatigue test results. However, such method has very restricted applicability in actual designing processes because performing fatigue tests requires a lot of time and money. In addition, non-standard rubber materials and their randomness make it hard to make databases. In this paper, the other fatigue life estimation method using tearing energy was suggested. We performed static and dynamic tearing test about automotive vibration rubber materials and a finite element formulation using a virtual crack to calculate the tearing energy of rubber components with complicated shapes. To using the suggested method, fatigue life of an automotive motor mount has been estimated and verified the reliability of this method by using comparison between the estimated values and the actual fatigue life.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1199-1203
• /
• 2011

Nanocomposites were prepared through the compounding of rubber and clay. Measurements of the static and dynamic mechanical properties of different compositions over a temperature range $70-100^{\circ}C$ showed that the mechanical properties of these rubber/clay nanocomposites are superior to those of existing rubber materials. In this study, by using the parameter of the maximum Green.Lagrange strain appearing at certain locations, the relationship between fatigue life and maximum Green.Lagrange strain, and the correlations between test-piece tests and bench tests of actual rubber components are proved. In order to predict the fatigue life of rubber components at the design stage, a simple procedure of life prediction is suggested. The predicted fatigue lives of the rubber engine mounts agree fairly well with the fatigue lives determined experimentally.

• Elastomers and Composites
• /
• v.36 no.2
• /
• pp.121-129
• /
• 2001

The friction characteristics of natural rubber plates under various conditions including sliding speed, normal force, hardness, lubrication conditions and thickness of plate are analyzed experimentally. The frictional force and normal force are measured by a tester pin and a load ceil with strain gages. Experimental results suggest that the coefficient of friction decreases with increasing the hardness of rubber and decreasing the thickness of plate. The effect of sliding speed is not significant over the speed range employed. The coefficient of friction is found to be about 0.1 under oil lubrication condition and varies from 0.9 to 3.9 under no lubrication condition.

• Elastomers and Composites
• /
• v.42 no.4
• /
• pp.209-216
• /
• 2007

Fatigue life prediction methodology of the rubber component made of vulcanized natural rubber under variable amplitude loadings was studied. The displacement-controlled fatigue tests were conducted at different levels and the maximum Green-Lagrange strain was selected as damage parameters. A fatigue life curve of the rubber represented by the maximum Green-Lagrange strain was determined from the nonlinear finite element analysis. The transmission load history of SAE as variable amplitude loading was used to perform the fatigue life prediction. And then a signal processing of variable loading by racetrack and simplified rainflow cycle counting methods were performed. The modified miner's rule as cumulative damage summation was used. Finally, when the gate value is 30%, the predicted fatigue life of the rubber component agreed well with the experimental fatigue lives with a factor of two.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.372-376
• /
• 2004

In this paper, the standard test methods at low temperature of rubber suspension components of railway vehicle are investigated and reviewed. In order to connect the TKR(Trans-Korean Railway)-TSR(Trans-Siberian Railway), it is necessary to evaluate the performance of rubber suspenion components of railway vehicle. In the current Korean Standard, the test method at low temperature of railway vehilce components and the test method of rubber bellows of air spring are specified. But, the specified test temperature is higher than the the operating temperature of TSR railway. So, the in-depth research for the test method and performance evaluation technique of rubber suspension component at low temperature is necessary and current KS code should be adjusted.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.9
• /
• pp.117-122
• /
• 1999

Track rubber parts has heat built-up as long as dynamic loading is applied from running tracked vehicles. Durability is required for rubber part to sustain the heat accumulation and heat exchange between rubber-metal assembly and environmental air and ground. For this research, the track assembly was divided into four parts i.e., bottom track shoe, upper track pad, pin busing and metal structure. Three rubber parts and metal structure were modelled and analyzed with MARC package program to obtain time-temperature data which was induced form mechanical work of tracked vehicles. heat accumulation data was obtained from special experiments under the room temperature of 25$^{\circ}C\;and\;35^{\circ}C$ to simulate the actual environmental conditions. From this research, it is cleared that the environmental temperature does not affect to the heat accumulation speed in rubber parts. Also, the heat built-up mechanism was clarified from the thermo-mechanical work based on numerical analysis and experiments.

• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.4
• /
• pp.83-89
• /
• 2002

Oil ring and sound proof rubbers are very much important because the cause of oil leakage are mostly occupied by these rubbers. So good oil rings are the necessary parts of autolife expansion. The expensive selection system keeps from factory automation and most works are established manually. These study has been the basis of test equipments automatically in rubber products and DCT algorithm has been applied and the selection system is made efficiently differentiating good or poor.

• Elastomers and Composites
• /
• v.40 no.2
• /
• pp.119-127
• /
• 2005

Material characteristics and lifetime evaluation are very important in design procedure to assure the safety and reliability of the rubber components. In this paper, the material test and accelerated heat aging test were carried out to predict the useful life of NBR and EPDM rubber mount for a compression motor which is used in a refrigerator. In order to investigate the effects of heat-aging on the material properties, crosslink density, modulus at 100% strain, stress-strain curves were obtained from uniaxial and equi-biaxial tensile tests. The change of compression set were used for assessment of the useful life and the time to threshold value were plotted against the reciprocal of absolute temperature to give the Arrhenius plot. The useful life at variable temperatures are obtained in the Arrhenius relationship.