• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.30-32
• /
• 2015

최근 대형 여객선 및 소형 낚시선 등의 전복사고 사례가 급증하고 있으며 이는 많은 인명사고와 함께 큰 경제적 손실로 이어지고 있다. 이로 인해 선박의 복원 안정성에 관한 관심이 더욱 높아지고 있다. 본 논문에서는 모형선의 복원력을 계측하여 평가 할 수 있는 복원성 시험 도구로서 복원력 계측 장비를 개발하였으며 성능 평가를 함께 실시하였다. 성능평가는 이론적 계산과 시험 결과의 비교분석을 통해 이루어졌고, 이론치와 상용프로그램 및 시험치 결과와의 오차가 각각 0.04%, 3.7%로 양호한 일치를 보여주고 있다. 이와 같이 4%이내의 매우 낮은 오차로 나타남으로서 본 계측 장비의 정밀성과 유용성을 확인할 수 있었다.

• Annual Conference of KIPS
• /
• 2016.04a
• /
• pp.479-481
• /
• 2016

원전에서 개발되는 계측제어 계통의 소프트웨어에 대한 평가를 위해서 발전소 상태를 모사하는 시뮬레이터를 활용하는 방법이 있다. 기존의 정적인 데이터만을 이용해서 수행하는 시험은 시스템의 성능을 정확하게 검증하는 데 한계가 있었지만 시뮬레이터에서 생성하는 입력 데이터를 계측제어 계통에 입력하여 시험을 수행하면 동적으로 변하는 상태를 구현할 수 있고, 계측제어 계통의 동작이 정확하게 수행되는 지 확인할 수 있다. 본 연구에서는 이러한 시뮬레이터를 기반으로 계측제어 계통의 시험검증 적합성 평가를 수행할 수 있는 환경을 구축하였고, 필요한 프로그램을 개발하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.513-514
• /
• 2007

최근 들어, 디지털 보호 계전기의 계측 및 계전 기능 외에 운용 프로그램 및 사고파형 분석 기능 또한 중요시 하고 있는 실정이다. 이를 위해 저장된 사고파형을 분석하기 위한 프로그램 개발이 요구되어 지고 있으며 본 논문에서는 다양한 기능을 가지는 사고파형 분석 프로그램을 소개한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.4
• /
• pp.87-97
• /
• 2000

A steady state performance simulation and diagnostics program for the turboprop engine (PT6A-62), which is the power plant of the first developed military basic trainer KT-1 in Republic of Korea, was developed. The developed steady state performance analysis program was evaluated with the performance data provided by the engine manufacturer and with analysis results of GASTURB program, which is well known for the performance simulation of gas turbines. Performance parameters were discussed to evaluate validity of the developed program at various cases such as altitude, flight velocity and part load variation. GPA(Gas Pass Analysis) allows engine performance deterioration to be identified at the module level in terms of reduction in component efficiencies and changes in mass flow. In order to find optimal instrument set to detect the physical faults such as fouling, erosion and corrosion, a gas path analysis approach is utilized. This study was performed in two cases for selection of optimal measurement parameters. One case was considered with the effect of instrument number by changing independent parameter number. The other case was performed with selection of independent parameter set. According to the analysis results, the optimal measurement parameters selected were eight dependent variables such as shaft horsepower, fuel flow rate, compressor exit pressure and temperature, compressor turbine inlet pressure and temperature and power turbine inlet pressure and temperature.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.486-491
• /
• 2000

Blasting vibrations velocity had been used to design blasting pattern and predict damage-possibility of structures. As vibration levels are currently required to estimate the damage concerning human-body and livestock, so measured vibration velocities must be transformed into vibration levels. In this study, the digital filter program was developed to transform measured data into vibration levels. Simple harmonic vibrations and measured data obtain by Blastmate series (Instantel Inc.) were applied to the digital filter program. As a result, simple harmonic vibrations and measured data were successfully transformed into vibration levels using the developed program. Measured data from any instrument with ASCII output-function will similarly be transformed into level units.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.241-246
• /
• 2000

Blasting vibrations velocity had been used to design blasting pattern and predict damage-possibility of structures. As vibration levels are currently required to estimate the damage concerning human-body and livestock, so measured vibration velocities must be transformed into vibration levels. In this study, the digital filter program was developed to transform measured data into vibration levels. Simple harmonic vibrations and measured data obtained by Blastmate series (Instantel Inc.) were applied to the digital filter program. As a result, simple harmonic vibrations and measured data were successfully transformed into vibration levels using the developed program. Measured data from any instrument with ASCII output-function will similarly be transformed into level units.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.5
• /
• pp.15-20
• /
• 2008

Compressibility of the marine clay was mainly studied velocity of consolidation and numerical analysis by this time but studies of reevaluated from the field measurement data was a little. For last three years, areal fills and extensive field instrumentations including settlement and pore water pressure were performed in the site of the Youngsan River estuary site, South Korea. From the settlement data, field consolidation curves for sub-layers were reconstructed. Effective surcharge loads during the staged loadings were calculated using the fill heights and the excess pore water pressures in the ground. In the numerical analysis (PLAXIS), prefabricated vertical drains were also simulated. Laboratory, field, and numerical analysis showed good agreements in compressibility. Due to different conditions and limitations of the clay was the same range of the oedometer tests.

• Nuclear Engineering and Technology
• /
• v.21 no.4
• /
• pp.294-301
• /
• 1989

The Axial Power Distribution Monitoring System(APDMS) program was developed to calculate a detailed axial power distribution using two-level excore detector, cold leg temperature and control rod position signals. The unnormalized two-level excore detector signals were corrected for the rod shadowing factor determined by control rod position and for the temperature shadowing factor calculated based on cold leg temperature. A shape annealing matrix was then applied to the corrected excore detector response to yield peripheral power. After the core average power was obtained using linear relationship bet-ween core average and peripheral power, the boundary point power correction coefficient was applied to core average power in order to obtain boundary power for both upper and lower core axial boundaries. Then, the axial power distribution was synthesized by spline approximation. In spite of burnup, power level, control rod postion and axial offset changes, the comparisons of axial power distributions between BOXER simulation program and APDMS results showed good agreements within 5% root mean square error for Kori Unit 3 Cycle 4.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.351-359
• /
• 2012

This paper deals with the design and development of the remote control and measurement systems using CDMA(Code Division Multiple Access) data modem. We propose a bi-directional data communication link without the public IP address in CDMA modem device by the TCP/IP packet and SMS(Short Message Service) communication. The remote control and measurement systems are implemented by a Telit WM-800 modem as DCE(Data Communication Equipment), and Atmel AT89C51 microcontroller as DTE(Data Terminal Equipment). The user application software for the control and measurement system user, and the firmware software of device drivers for peripherals such as a digital input/output device, AD/DAC(Analog to Digital/Digital to Analog Converter), LCD, and temperature/humidity sensor are written in Microsoft C and Keil C language respectively for further various applications. The experimental result of the proposed control and measurement systems implemented in this paper is evaluated via real-time experiments, which works well as designed.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1678_1679
• /
• 2009

원전에 설치되어 있는 노외 핵계측 검출기는 설계수명과 품질보증 수명의 차이가 크기 때문에 적절한 검출기 교체 프로그램의 수립이 어렵다. 따라서 본 논문에서는 노외 핵계측검출기에 대한 노화 진행정도 판단 및 최적 교체주기 수립을 위한 원전 노외 핵계측 검출기 성능진단 시스템 및 분석기술에 대해 고찰하였다.