• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.2
• /
• pp.108-116
• /
• 2014

The proper stress history measurement should be conducted in order to examine the accurate cause of fatigue cracks or the fatigue safety in the steel bridge. Only one strain gauge is generally installed in the field for the stress history examination because of the field circumstances, economic feasibility, workability, and so on. However, this method may not consider the actual size of the specific structure, the gauge length, and the affect of stress concentration in the welded joint. In addition, it is difficult to apply for the stress analysis. Therefore, this study suggests improvements that are a great number of gauge installations, the gauge location adjustment, and the use of the minimum length gauge. It is drived the correlative equation of strain for the distance between the welding toe and the strain gauge installation, and compare correlative equation with equation of IIW. Also, this study could estimate the remaining life and fatigue damage of bridge in service by selecting the suitable stress category. In conclusion, it is possible to understand the member which is high in the fatigue cracks, and the quantitative relations between the welding toe and the strain gauge installation distances. The proposed approach in this study can make an more accurate fatigue damage and a remaining life prediction so that the improved method should be applied in measuring the strain of bridges from now on.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.2
• /
• pp.219-227
• /
• 2001

Little is known about processing mechanism of pain sensation of the oral cavity at the 1st synapse of trigeminal sensory nuclei. Serial ultrathin sections of tooth pulp afferent terminals, identified by the transganglionic transport of 1% wheatgerm agglutinin conjugated horseradish peroxidase, were investigated with electron microscope. Quantitative ultrastructural analysis was performed on digitizing tablet connected to Macintoshi personal computer (software; NIH Image 1.60, NIH, Bethesda, MD). Labeled boutons could be classified into two types by the shapes of containing vesicles : S bouton, which contained mainly spherical vesicles (Dia. 45-55 nm) and few large dense cored vesicles (Dia, 80-120nm), and LDCV bouton, which contained spherical vesicles as well as large number of large dense cored vesicles. Most of the parameters on the ultrastructural characteristic and synaptic organization of labeled boutons were similar between S and LDCV boutons, except shapes of containing vesicles. Majority of the labeled boutons showed simple synaptic arrangement. The labeled boutons were frequency presynaptic to dendritic spine, and to a lesser extent, dendritic shaft. They rarely synapsed with soma and adjacent proximal dendrite. A small proportion of labeled boutons made synaptic contacts with presynaptic, pleomorphic vesicles containing endings and synaptic triad. Morphometric parameters of labeled boutons including volume and surface area, total apposed area, mitochondrial volume, active zone area, vesicle number and density showed wide variation and these were not significantly different between S and LDCV boutons. The present study revealed characteristic features on ultrastructure and synaptic connection of pulpal afferents which may involved in transmission of oral pain sensation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.3_4
• /
• pp.390-401
• /
• 2002

This study was to evaluate the fitness and the suitability of size specification of the ready made jacket for women by analysing pattern size and space between skin and clothing using 3D scanner. The results were as follows: 1. Pattern B had the lowest score and the feeling of wearing was significantly different among the given patterns even though all jacket size specification were the same. 2. Ease amount was different between each brand even though the jacket size specification was the same due to the different pattern grading rules. And increasing grading amounts were bigger in horizontal direction rather than in vertical direction. 3. We could obtain accurate a 3 dimensional figure, using 3D scanner which was very useful and more accurate than 2 dimensional data using photography method. 4. Analyzing the average space between skin and clothing of each pattern, there was no significant difference in the average space between skin and clothing among all patterns except waist part of B88 size. And analyzing the average space between skin and clothing of each measured body parts by each size, there existed a significant difference in the interscye, abdomen and hip parts.

• The Journal of the Korea Contents Association
• /
• v.12 no.9
• /
• pp.136-145
• /
• 2012

This research proposes a pattern making method for women's bodice by the characters of body types and develops bodice dress forms on their body shapes applying 3D body scan data. 515 women's body scan data was collected and analyzed factor and cluster analysis. Three body types were characterized in normal, obese, and slim group. In each group, 10 subjects were selected. 20 parts in 3D anthropometric data were measured using Autocad program. The amount of waist dart was calculated and three types of basic bodice pattern were developed using the calculated darts data. The amount and the position of front dart and side dart were different at obese group in comparison of normal and thin group. The three types of basic bodice model were made by the basic bodice pattern, and each model was scanned by 3D scanner to make 3D bodice dress forms. Three types of bodice dress forms were rendered using 3D max program. Bodice dress forms had the dart lines and were useful to draft patterns to fit their body shape.

• Journal of Korea Water Resources Association
• /
• v.53 no.12
• /
• pp.1183-1192
• /
• 2020

Economic analysis is a basic step in establishing disaster mitigation measures, but it is difficult to verify the results due to uncertainty. Therefore, the scope of investigation and analysis is wide. However, it is difficult to predict the amount of damage caused by flooding because the collection of relevant data is limited in the ungauged basin. In this study, distributed runoff analysis and flooding analysis were performed, and a method of estimating the amount of flood damage in the ungauged basin was proposed using collectible social and economic indicators and flood analysis results. For distributed runoff analysis and flooding analysis, GRM (Grid based Rainfall-runoff Model) and G2D (Grid based 2-Dimensional land surface flood model) developed by Korea Institute of Civil engineering and Building Technology were used. The method of substituting collectible social and economic indicators into the simple method and improvement method was used to estimate the amount of flood damage. As a result of the study, it was possible to estimate the amount of flood damage using satellite data and social and economic indicators in the ungauged basin.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.143-150
• /
• 2018

This work conducted the experimental analysis on ultrasonic acoustic matching in order to measure the accuracy of gaseous fuel level values. The experimental devices were used as 12V-DC supply, control T1 board, oscilloscope (DS01072B), ultrasonic probe and pattern table. The research models were designed by ceramic assay which can determine the transmitting and receiving energies. The result of the ringing area could verify the increased characteristics in the order of D (0.180m) < E (0.184m) < B (0.204m) < A (0.234m) < F (0.244m) < C (0.247m) models based on initial 2.9V of the maximum peak voltage. From the experimental results, the model designed by Ø21*3+2t of the matching layer was notable in that the most outstanding directivity energy could be created.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.179-188
• /
• 1990

The characteristic of volumetric efficiency considering gas exchange process in a reciprocating engine is presented in this paper. The characteristic method is used for solving gas exchange problems of engine system in theoretical studies. The validity of the simulation is investigated by a comparison with the results obtained by the experiment which have been performed on the practical 4-cycle, 4-cylinder gasoline engine. The relationship between the volumetric efficiency and the intake pressure variation according to configuration of intake pipe, position of branch point, valve timing, compression ratio is clarified through simulation and experiment. The results predicted by the simulation are found to be in approximate agreement with those obtained by the experiment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1182-1186
• /
• 2006

The decision of design flood in river basins is very important in the aspect of flood control. The design flood of rivers was estimated according to the size and importance of basins. As the damage of floods increases more and more and the importance of defense against floods increases further, the presumption of design flood can be very important. Especially, what influences most greatly flood is rainfall. However, in spite of equal rainfall, the estimated flood differ according to the features of basins. The fact that the features of basins influence greatly the estimation of flood was confirmed by the preceding research results and experiences. However, although many rivers have their own basin features, the research on how these basin features are related to the estimation of design flood, is not yet sufficient. The purpose of this study is to identify how the design flood estimated previously by river arrangement basic plan is correlated with topography factors, and so investigate the correlation between basin topography factors and design flood in order to provide the additional information for the unmeasured basins or the middle/small river basins where their river plan is not established.

• Korean Journal of Human Ecology
• /
• v.15 no.4
• /
• pp.651-658
• /
• 2006

This study was performed to provide the analysis on their size and the structural factors required in the process of design and manufacture of school girls' shoes. 371 elementary school girls in Kyungin and Youngnam area were participated in the size measurement. 25 foot items and 6 main body items were measured directly or indirectly using a digital photography. The results of the study are as follows: first, by most of measured items, the range of their foot size was very wide from the size of toddlers to adults'. That shows that the change of school girls' foot size occurred with their growth is pretty big. Second, from the structural factor analysis on 25 foot items, five factors were extracted such as 'the size of the foot', 'the volume of the foot,' 'the height and inclination of the foot,' 'the shape of the foot,' and 'the inside and outside inclination of the foot'. Third, from the cluster analysis, three clusters were classified: Cluster 1 was the group of 10 to 11 year old girls who had big-sized feet. The elementary school girls in the fourth to sixth grade belonged to this group. Cluster 2 consisted of girls who had small-sized and big-volumed feet. Cluster 3 had medium-sized and slim-shaped feet. Most of 6 to 7 year old elementary school girls belonged to this group. The above-mentioned results imply that many continual researches are required on children's shoe production reflecting the change of elementary school girls' feet size owing to their growth. The quantitative data on elementary school girls' feet size in this study could be used as basic information for the development of children's shoe design and its production.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.6
• /
• pp.147-154
• /
• 2010

In this study, flood control effects for infiltration trench which is one of runoff reduction facilities were analyzed based on hydraulic experiments. Hydraulic experiments were conducted using 25 cm diameter circular pipe, and water depths for boundary conditions are 5, 10, 15, 20, 25 cm. Infiltration volume, runoff volume, runoff initiation time, final infiltration capacity and final infiltration capacity reached time etc. were measured from infiltration trench hydraulic experiment. We assumed that drainage area of each infiltration trench is $130\;m^2$ ($6.5\;m{\times}20\;m$) and calculated CN with area based on those experimental characteristics. In AMC-I condition, the calculated CN with five water depths is 84 for 2% pipe slope, 83 for 5% pipe slope. In AMC-III condition, the calculated CN is 84 for 2% and 5% pipe slope.