• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1993.07a
• /
• pp.178-182
• /
• 1993

유속의 연직분포를 알기 위한 방안의 하나로 Galerkin 함수 전개모델에 대한 연구가 활발히 진행되어 왔다(Heaps, 1972； Davies, 1980； Cordon,1982； 최,1983；강등,1993). Galerkin 함수 이용 3차원 모델은 수직좌표상의 수평유속 성분을 수평좌표, 시간에 따라 변하는 계수 와 수심에 따라 변하는 함수군의 곱의 형태로 선형전개하며, 계수의 값은 Galerkin 방법을 써서구한다. (중략)

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1993.07a
• /
• pp.146-151
• /
• 1993

쇄파대에서 발생되는 연안류의 분포는 완만한 곡선분포를 보이는데 단순파인 경우이의 해석은 확산계수의 도입으로만 가능하다는 점은 널리 알려진 사실이다. Harris(1967)는 현장관측과 수조실험으로 이 분야 초기연구로서 쇄파대 확산의 변이를 무시하고 평균확산계수치만을 고려하였다. 연안류해석의 확고한 이론적 기초를 마련한 Longuet-Higgins(1970)는 그의 이론식 도출고정에서 확산계수 도입의 필요성을 인식하였으며, 특성길이로서 연안선으로부터의 거리를 택하고 특성속도로서 파속을 택하였으며 쇄파대내에서 파속은 군속도와 같다고 가정하였다. (중략)

• Bulletin of the Korean Space Science Society
• /
• 1993.10a
• /
• pp.23-23
• /
• 1993

과학로케트에 탑재되는 x-선 검출기에서 검출되는 2 kev 에서 10 kev 사이의 x-선 신호를 분석하여 데이터를 얻고, 전송하기 위한 피로를 설계하고 제작하였다. 신호처리회로의 전체적인 구성은 2 - 10 key의 x-선 에너지 및 event time을 측정하는 회로 및8-선 계수율을 측정하기 위한 카운터회로를 위주로 설계하였으며, x-선 event의 에너지가 측정에너지를 벗어나거나 상승시간이 긴 신호는 anti-coincidence 회로를 통하여 제거되고, 그 계수율이 기록되도록 설계 제작되었다. 또한 신호처리회로에서 얻은 데이터는 telemetry를 통하여 serial 형태로 전송되어야 하므로 8086 microprocessor를 이용하여 데이터를 획득하고 전송하도록 하였다. 따라서 본 실험에서 제작된 신호처리회로의 기능 및 특성에 대해 논하고자 한다.

• 전자공학회논문지 IE
• /
• v.43 no.1
• /
• pp.52-58
• /
• 2006

In order to provide an efficient way to processing with limited resources, we propose a wavelet coder that operates with little memory usage on the portable embedded system. In order to reduce redundancy in coding process caused by repetitive scanning of wavelet coefficients, the proposed coder uses a 2D significance coefficient array (SCA) which records the bit-level information of wavelet coefficients. The 2D SCA improves memory usage and processing speed required for image coding because it can perform significance check and bit coding of coefficients simultaneously.

• Journal of KIISE:Software and Applications
• /
• v.35 no.8
• /
• pp.463-478
• /
• 2008

Due to the high dimensional problem, typically machine learning algorithms have relied on feature selection techniques in order to perform effective classification in microarray gene expression datasets. However, the large number of features compared to the number of samples makes the task of feature selection computationally inprohibitive and prone to errors. One of traditional feature selection approach was feature filtering; measuring one gene per one step. Then feature filtering was an univariate approach that cannot validate multivariate correlations. In this paper, we proposed a function for measuring both class separability and correlations. With this approach, we solved the problem related to feature filtering approach.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.1
• /
• pp.29-36
• /
• 2004

Generally, wavelet coefficients can be classified into two categories: large coefficients with much signal information and small coefficients with little signal component. This statistical characteristic of wavelet coefficient is approximated to Gaussian mixture model and efficiently applied to noise reduction. In this paper, we propose an image denoising method using mixture modeling of wavelet coefficients. Binary mask value is generated by proper threshold which classifies wavelet coefficients into two categories. Information of binary mask value is used to remove image noise. We also develope an enhancement method of mask value using morphological filter, and apply it to image denoising for improvement of the proposed method. Simulation results shows the proposed method have better PSNRs than those of the state of art denoising methods.

• Journal of the Korean Chemical Society
• /
• v.27 no.6
• /
• pp.405-410
• /
• 1983

Bei Verteilungskoeffizient-Werten von 1,3 bis 325 wurde eine lineare Abhangigkeit sowohol der Halbwertsbreite als auch des Elutionsmaximums vom Verteilungskoeffizient gefunden. Die Elutionsversuche an Natrium und Casium haben gezeigt, $da\beta$ eine lineare Abhangigkeit zwischen Sauleulange und Elutionsmaximum besteht. Dieses Verhalten konnte bei 30cm bis 540cm Saulenlange bestatigt werden. Es ist keine lineare Abhangigkeit zwischen Saulenlange und Halbwertsbreit. Es ist zu sehen, $da\beta$ die Halbwertsbreite mit $gro{\beta}er$ wendendem Saulenlange schwach abfallen. Das starkere Abbiegung der Halbwertsbreite bei wachsender Saulenlange fur Substanzen mit geringeren Verteilungskoeffizientunterschied weist auf eine deutliche Verbesserung der Trennung bei Verwendung von $gro{\beta}en$ Saulenlangen hin.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.5
• /
• pp.385-392
• /
• 2018

This paper suggests a new method to estimate the roll and pitch damping moment coefficients of a flying disc through sensor data from the onboard IMU module. This method can be easily performed than wind tunnel or computational fluid dynamics methods because it estimates aerodynamic coefficients simply after accumulating the inertial data through several repeated flight experiments. Estimated coefficients are applied to a simulator which is based on the flight dynamics of a flying disc. Finally, the predicted flight trajectory is compared with the true position provided by GPS, which demonstrated the validity of the proposed estimation method.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.1
• /
• pp.9-17
• /
• 2001

A probability of failure of armor units on rubbJe-mound breakwater are evaluated by using the direct method for reliability analysis, which is represented as a function of safety factor that has been extensively used in practical design. The reliability function is fonnulated based on Hudson formula suggested for designing the stable size of armor units on rubble-mound breakwater. Several kinds of stability coefficient are applied separately to calculate the probability of failure with respect to the type of armor units, breaking/nonbreaking and the correlation coefficients between random variables. [n addition, the sensitivity analyses are carried out to investigate quantitatively into the effects of each random variable in the reliability function on the probability of failure.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.4
• /
• pp.336-344
• /
• 2007

A method is developed to evaluate partial safety factors for armor units, by which uncertainties of random variables in reliability function as well as wave height distribution with service periods could take into account straightforwardly. It is found that partial safety factors for resistance and wave height are correctly increased with improving target levels on failure of coastal structures at the same return and service periods. Therefore, it nay be possible to determine design variables through the same processes as those of deterministic method by using the partial safety factors for resistance and wave height evaluated in this paper, since uncertainties of random variables and the effects of service periods and target probability failure are directly considered in the processes of evaluation of partial safety factors.