• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.599-606
• /
• 1988

Structures of interfacial waves in nearly-horizontal countercurrent stratified air-water flow have been measured by means of a needle contact method. Based upon a statistical analysis for the liquid film distribution, statistical properties of the waves such as mean film thickness, mean wave amplitude and rms value of the wave fluctuation have been calculated. The results show that the film distribution can be described by a Gaussian probability density function for the three-dimensional wave regime. It is also indicated that the mean film thick ness and the rms value of the wave fluctuation increase as gas and liquid flow rates are increased in countercurrent two-phase flow. The dimensionless intensity of the wave fluctuation may be regarded as a function of the Froude number and the dimensionless mean film thickness.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.4
• /
• pp.376-387
• /
• 2012

Based on the nonlinear spring model coupled with perturbation method, 2nd harmonic waves generated by oblique incident ultrasound on nonlinear crack interface were calculated and investigated. Reflected and transmitted waves from the interface were determined and analyzed at various angle of incidence for the cracks with different interfacial stiffness in order to estimate the 2nd harmonic generation of incident ultrasound. It was shown in computer simulation that the 2nd harmonic components changed much with the increase of incidence angle in both reflected and transmitted wave, but became very small when the incident angle approached toward 90 degree. It can be concluded that the 2nd harmonic component of reflected wave has a meaningful amplitude as much as the transmitted 2nd harmonic wave from partly closed crack.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.114-122
• /
• 2015

In the high convective gas flow condition, irregular shaped water waves from which droplet entrainment occurs are generated under horizontally stratified two-phase flow condition. KAERI proposed a new mechanistic droplet entrainment model based on the momentum balance equation consisting of the shear stress, surface tension, and gravity forces. However, this model requires correlation or experimental data of several physical parameters related to the wave characteristics. In the present study, we tried to measure the physical parameters such as wave slope, wave hypotenuse length, wave velocity, wave frequency, and wavelength experimentally. For this, an experiment was conducted in the horizontal rectangular channel of which width, height, and length are, respectively, 40 mm, 50 mm, and 4.2 m. In the present test, the working fluids are chosen as air and water. The PIV technique was applied not only to obtain images for phase interface waves but also to measure the velocity field of the water flow. Additionally, we developed the parallel wire conductance probe for the confirmation of wave height from PIV image. Finally, we measured the physical parameters to be used in the validation of new droplet entrainment model.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.1
• /
• pp.116-122
• /
• 1988

Interfacial shear stresses have been determined for countercurrent stratified flow of air and water in a nearly-horizontal rectangular channel, based upon measurements of pressure drop, gas velocity profiles and mean film thickness. A dimensionless correlation for the interfacial friction factor has been developed as a function of the gas and liquid Reynolds numbers. Equivalent surface roughnesses for the interfacial friction factor have been calculated using the Nikuradse correlation and have been compared with the intensity of the wave height fluctuation on the interface. The results show that the interfacial shear stress is mainly affected by turbulent mixing near the interface due to the wave motion rather than by the roughened surface.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.4
• /
• pp.362-368
• /
• 2012

The objective of this study is to image the harmonic wave generated by contact acoustic nonlinearity in obliquely incident ultrasonic wave for early detection of closed cracks. A closed crack has been simulated by contacting two aluminum block specimens producing solid-solid contact interfaces and then acoustic nonlinearity has been imaged with contact pressure. Sampling phased array(SPA) and synthetic aperture focusing technique(SAFT) are used for imaging techniques. The amplitude of the fundamental frequency decreased with appling pressure. But, the amplitude of second harmonic increased with pressure and was a maximum amplitude at the simulation point of closed crack. Then, the amplitude of second harmonic decreased. As a result, harmonic imaging of contact acoustic nonlinearity is possible and it is expected to be apply for early detection of initial cracks.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.2
• /
• pp.77-85
• /
• 1998

Propagation of elastic surface waves in anisotropic media is considered in this study. An analytical technique is proposed to study the scattering of surface waves at the interface between two anisotropic quarter-spaces. The Green's function technique is used to derive a system of equations which can determine the scattering coefficients at the interface. A numerical study is carried out and the trade-offs between the material anisotropy and inhomogeneity are studied.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.29.3-29.3
• /
• 2010

남극세종기지 상공 중간권계면에서의 중량파(gravity wave)를 연구하기 위해 세종기지 유성 레이더로 관측한 유성 에코를 분석하였다. 2007년 이후 유성 에코의 공간적 이동으로부터 유성 관측 고도에서의 수평 바람 정보를 지속적으로 수집해왔다. 80-100 km 고도에서의 바람 프로파일에서 지구 규모의 성분인 평균 바람(Mean wind), 대기 조석 효과(Tides)를 제거하여 국지적인 규모의 중량파에 의한 바람 변화폭(wind variance)을 결정하였다. 월 단위로 평균한 결과로부터 중량파가 계절과 고도에 대한 뚜렷한 특징을 보이고 있음을 확인하였다. 남극 지역에서의 중량파는 동서방향의 바람(zonal wind)와 저층 대기의 남극 소용돌이(vortex)와 깊은 관련이 있을 것으로 생각된다. 남극 반도에 위치한 Rothera 기지에서의 관측 결과와의 비교를 통하여, 남극 반도에서 발생하는 중량파가 중간권과 저층 대기 사이에서 어떤 역할을 하는 지를 확인할 수 있을 것으로 기대한다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.2
• /
• pp.70-77
• /
• 1999

The disturbance of oil-water interface confined between tandem fences caused by a sequence of traveling vortices below the interface is investigated. The traveling vortices are assumed to be those detached from the tip of the fore fence. The potential flow is assumed and the density interface is replaced as a sheet of vortex. The shape of the interface is predicted by tracing a finite number of marker particles placed at the interface. The velocity of the marker particles is determined by the Biot-Savart integral along the vortex sheet plus the contribution from the traveling point vortices. The rate of change of vortex-sheet strength is predicted by using an evolution equation for vorticity. The calculated results obtained for various conditions demonstrate that the large amplitude of interfacial wave following the moving vortek can be generated by the vortices.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.242-243
• /
• 2003

최근 유전체와 유전체, 유전체와 금속 물질 경계면에서 일어나는 계면 현상에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 유전체와 유전체 경계면에 형성된 소산파의 크기를 maxwell의 방정식을 이용하여 계산하고, 광학 trap을 이용한 광압 측정법을 사용하여 경계면에서 소산파의 크기를 실험적으로 측정하였다. 광압 측정 장치는 그림 1과 같다. (중략)

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.1
• /
• pp.40-46
• /
• 2011

In the field application of the conventional acoustic nonlinear technique using through transmission of bulk waves to evaluate the contact acoustic nonlinearity(CAN) in solid-solid contact interfaces like as in the closed crack, it has difficulty to access inner position for attaching the pulsing or receiving transducer. In the present study, a new reflection technique has been suggested to measure the acoustic nonlinearity in solid-solid contact interfaces, which uses both of pulsing and receiving transducers on the same side of target and so that it will be very useful for the field application. For this, based on the linear and the nonlinear contact stiffness estimated by the power-model of the contacting pressure, the nonlinear parameter of the reflected ultrasonic wave at the interfaces has been theoretically calculated. Experimental results in contact interfaces of A1606l-T6 alloy specimens with loading pressure showed good agreement with the theoretical predictions, which proves the validity of the suggested reflection mode technique.