• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.5
• /
• pp.523-530
• /
• 2010

Recently more gravity data is being obtained due to the increased demands from the fields of geodesy, geophysics, and military. In general, the observed gravity values are corrected for the effect of tide, instrument drift, and instrument height to generate the absolute gravity values at a point. Until yet, the models for tide and drift corrections and those procedures are not determined in Korea which led to the inconsistent data processing for different data sets. Therefore, in this study, the models for tide and drift are analyzed to select the appropriate models. Based on the analysis, it was found that there is not much difference between Longman and Tamura tide models for celestial objects. Earth tide, however, should be considered in tide correction procedure. In drift corrections, the difference between the model considering only the common points and that considering all points appears significantly large up to 0.04mGal. In this case, the model with all points should be used as it the correct one according to the adjustment theory and it generates estimates with better precision.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.2
• /
• pp.39-50
• /
• 2002

Several pre-processing techniques for earthquake data from earthquake monitoring institutes in Korea including Korea Electric Power Research Institute are thoroughly reviewed. Among these techniques for removing an instrumental response, removing the non-causal ringing distortion by FIR filter, checking calibration status of seismic stations, and minimizing the window effect are introduced and applied to real data. It is also recommended that analysts evaluate S/N ratio in the frequency domain and consider the possibility of using the saturated earthquake data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.821-831
• /
• 2019

The 9.12 earthquake (2016.9.12., M_L=5.8) and Pohang (2017.11.15., M_L=5.4) caused social and economic damage, resulting in a greater public interest in earthquakes than in the past. In the U.S., Japan and Chile, which have high frequency of earthquakes, infrastructure facilities are already managed based on probabilistic seismic hazard analysis (PSHA) and ground motion prediction equation (GMPE) to prepare for and respond to seismic disasters. In South Korea, the aforementioned PSHA and GMPE models have been developed independently through individual researchers. However, the limited disclosure of basic data, calculation methods, and final results created during the model development poses a problem of deploying new data without updating the earthquake that occurs every year. Therefore, this paper describes how to create flatfile, which is the basic data of GMPE, and how to process for seismic waves, and how to create intensity measures.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2011

As a check on calibration and drift in each discrete sub-system of a commercial frequency-domain airborne electromagnetic system, we aim to use causality constraints alone to predict in-phase from wide-band quadrature data. There are several possible applications of the prediction of in-phase response from quadrature data including: (1) quality control on base level drift, calibration and phase checks; (2) prediction and validation of noise levels in in-phase from quadrature measurements and vice versa and in future; and (3) interpolation and extrapolation of sparsely sampled data enforcing causality and better frequency-domain-time-domain transformations. In practice, using tests on both synthetic and measured Resolve helicopter-borne electromagnetic frequency domain data, in-phase data points could be predicted using a scaled Hilbert transform with a standard deviation between 40 and 80 ppm. However, relative differences between base levels between flight could be resolved to better than 1 ppm, which allows an independent quality control check on the accuracy of drift corrections.

• Journal of the Korean Geophysical Society
• /
• v.10 no.1
• /
• pp.1-12
• /
• 2007

A method to quickly estimate broadband moment magnitudes (Mwp) to warn regional and teleseismic tsunamigenic earthquakes is tested for application of the method to the different seismic observation environment. In this study, the Mwp is calculated by integrating far-field P-wave or pP-wave of vertical component of displacement seismograms in time domain from earthquakes, having magnitude greater than 5.0 and occurred in and around the Korean peninsula from 2000 to 2006. We carefully set up the size of the time window for the computations to exclude S wave phases and other phases following after the P wave phase. The P wave velocities and the densities from the averaged Korean crustal model are used in the computations. Instrumental correction was performed to remove dependency on the seismograph. The Mwp after the instrumental correction is about 0.1 greater than the Mwp before the correction. The comparison of our results to the those of foreign agencies such as JMA and Havard CMT catalogues shows a higher degree of similarity. Thus our results provide an effective tool to estimate the earthquake size, as well as to issue the necessary information to a tsunami warning system when the effective earthquake occurs around the peninsula.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.36-37
• /
• 2008

전력계통 내에는 수많은 측정장비가 사용되며, 그들로부터 측정된 데이터들은 중앙으로 전송되어 계통의 해석과 제어에 사용된다. EMS에서 사용하는 각종 응용 프로그램은 이와 같은 입력데이터의 정확도에 많은 영향을 받게 된다. 본 논문에서는 상태추정 기법을 이용하여 EMS 데이터베이스에 사용하는 측정데이터를 보정(calibration)하는 방법을 소개한다. 보정에러는 정확하게 조정되지 않은 계기에 의해 측정데이터에 포함된 일정한 크기의 측정 바이어스로 가정하였다. 본 논문에서는 상태추정을 이용하여 측정데이터를 보정하는 방법을 사용함으로써 현장에서 많은 시간과 비용을 들여 측정장비를 조정하는 것보다 훨씬 효율적으로 데이터를 관리할 수 있다. 제주도의 실계통 데이터를 이용하여 사례연구를 수행함으로써 제안된 방법의 타당성을 검증하였다.

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.4
• /
• pp.15-22
• /
• 1987

이상 최근 10년 사이 현저하게 보여준 엔진관계의 신기술과 그 배경 등을 돌아 보았을 때 발전하 는 가운데 특히 4륜차용 2사이클 엔진의 몰락이나 엔진의 주요 부품인 기화기의 쇠태는 그 어느 것이나 시대의 요구에 대한 기술의 한께 혹은 신기술의 개발 템포에 추종키 여려웠던 때문인 것 으로 생각된다. 2사이클 엔진은 비출력이 높고 밸브기구가 없어서 구조가 간단한 등의 장점이 있는 반면 배출가스대책(특히 HC), 경부하시의 부정연소 등의 문제를 가지고 있어 4륜차용으로 서는 배출가스규제를 계기로 SAAB(스웨덴), DKW(서독)의 2사이클 엔진이 자취를 감추게 되었 고 현재 남아있는 것은 일본의 경트럭용 엔진에 지나지 않는다. 또 기화기에 대해서도 배출가 스규제에 대한 대응에 밀려 공연비의 제어성, 고도에 대한 보정성, 내열신뢰성, 제어성, 고도에 대한 보정성, 내열신뢰성, 운전성 등의 요구에 엄해진 반면 흡기포트내(PI), 혹은 흡기관 중양부 내(SPI) 가솔린분사방식에 눌려서 가변벤투리식 등도 미국(1982), 일본(1983)에서 발표되었으나 1985년형의 미국차 엔진에는 기화기의 정착율이 50%에 지나지 않는등승용차용 분야에서는 그 사용이 점차 줄어두는 추세에 있다.

• Geotechnical Engineering
• /
• v.10 no.2
• /
• pp.97-108
• /
• 1994

A new RI calibration curve acquired from the laboratory tests on typical embankment materials is found to be adequate for testing subgrade materials in Korea but may not be suitable for testing materials containing gravels. Therefore this study aims for the modification of RI values that enables the usage of RI to all kinds of roadbed materials. Also other factors available for the criteria of compaction control such as air void ratio and degree of saturation were reviewed for their applicability.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10b
• /
• pp.515-520
• /
• 2006

계량기 숫자 인식은 일반적으로 사용되고 있는 아날로그 계량기에 카메라를 부착하여, 검침 시 숫자 계기판 영상을 전송받고, 그 영상으로부터 숫자를 추출 및 인식하는 기술이다. 계량기 숫자 인식에서는 카메라의 설치 상태 및 기타 환경적인 요인들로 인해 숫자 계기판 영상의 일관성 있는 취득이 어렵게 된다. 본 논문에서는 숫자 인식에 악영향을 미치는, 취득 영상의 상태 변화를 보정해주기 위해 잡영 제거 및 윤곽보존 숫자강화를 제안하였다. 잡영 제거를 위해 잡영을 분포 위치에 따라서 세 가지 타입으로 나누었으며, 각 타입별로 잡영 제거를 하였다. 윤곽보존 숫자강화 과정에서는 일반적인 이진화 기법이 가지는 테두리 정보손실을 최소화할 수 있도록, 숫자 테두리의 명도를 보존하면서 숫자 중심부분의 밝기를 강화시켰다. 전처리 전/후의 인식률 비교 실험을 위해 SVM(Support Vector Machines)을 사용하였으며, 학습 데이터 1,409장과 조명 상태를 달리하여 취득한 1,782의 테스트 데이터를 실험 데이터로 사용하였다. 실험 결과, 81.09%라는 성능 향상을 확인하였으며 이는 제안한 전처리 기법이 조명으로 인한 데이터의 상태 변화 문제를 해결해줌으로써 인식 성능 향상에 크게 기여한다는 것을 입증해준다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.4
• /
• pp.255-260
• /
• 1991

A voltage measuring system specified for the voltage fluctuation of the Pusan-Hamada submarine cable is developed by adding circuits of differential amplification and analog-to-digital conversion to a microprocessor-based data logger with a data modem. This system is charaterized by its small size. no power failure. fully unmanned operation. and precise instrumental drift correction. In addition to the cable voltage and current it measures an ambient temperature and a mercury cell voltage in order to calibrate temperature effect and check its long-term stability. The data acquired by this system show that the voltage signal. comprising fast random noises with a constant width of about 0.2V. fluctuates within a range of about 1V and the fluctuation frequency is similar to that of tidal motion. The source voltage of power feeding equipment (PFE) for the cable system seems to be affected when the room temperature changes rapidly.