• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.2 s.308
• /
• pp.19-29
• /
• 2006

As the security of personal information is becoming more important in mobile phones, we are starting to apply iris recognition technology to these devices. In conventional iris recognition, magnified iris images are required. For that, it has been necessary to use large magnified zoom & focus lens camera to capture images, but due to the requirement about low size and cost of mobile phones, the zoom & focus lens are difficult to be used. However, with rapid developments and multimedia convergence trends in mobile phones, more and more companies have built mega-pixel cameras into their mobile phones. These devices make it possible to capture a magnified iris image without zoom & focus lens. Although facial images are captured far away from the user using a mega-pixel camera, the captured iris region possesses sufficient pixel information for iris recognition. However, in this case, the eye region should be detected for accurate iris recognition in facial images. So, we propose a new fast iris detection method, which is appropriate for mobile phones based on corneal specular reflection. To detect specular reflection robustly, we propose the theoretical background of estimating the size and brightness of specular reflection based on eye, camera and illuminator models. In addition, we use the successive On/Off scheme of the illuminator to detect the optical/motion blurring and sunlight effect on input image. Experimental results show that total processing time(detecting iris region) is on average 65ms on a Samsung SCH-S2300 (with 150MHz ARM 9 CPU) mobile phone. The rate of correct iris detection is 99% (about indoor images) and 98.5% (about outdoor images).

• Economic and Environmental Geology
• /
• v.38 no.6 s.175
• /
• pp.643-656
• /
• 2005

The East Sea, a marginal sea or back-arc basin, consists of Japan Basin, Yamato Basin, and Ulleung Basin and is surrounded by the Pacific Plate and Philippine Sea Plate. Ulleung Basin locates in the southwestern part of the East Sea and shows the depth of 1,500 m in average and 2,500 m in maximum, connecting to the Japan Basin along 2,000 m contour. The slope of the seafloor is greater in the western side of the basin than in the southern and the eastern side. The crustal thickness of the Ulleung Basin from the OBS tends to get thicker toward the north and the west side and the sediment thickness of the Ulleung Basin is getting thicker toward the southeast side and reaches up to 12 km. The crustal type of the Ulleung Basin was variously suggested as like as a rifted continental crust, an extended continental crust, and an incipient oceanic trust. The origin of the crustal formation and the Ulleung Basin, however, is still controversial. Based on the bathymetry and gravtiy anomaly data for this study, the axis of the Ulleung Basin shows that the basin develops along the axis trending NW-SE direction and reveals a general symmetry of the bathymetry. And also the free-air gravity anomalies show a very similar pattern to the bathymetry of the basin. The sediment thickness is relatively thicker in the southeastern side of the basin than in the northwestern side. Although the crustal age of the Ulleung Basin is supposed to be younger than them of the Japan Basin and the Yamato Basin, the free-air gravity anomalies of the Ulleung Basin ranging -40 to 50 mGals are lower than the other basins, which suggests that the densities of crust and sediment of the Ulleng Basin are lower than the Japan Basin and the Yamato Basin.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.127-142
• /
• 2000

This study have been carried out to find out the mechnical effect of Multiloop Edgewise Arch Wire(MEAW) making use of the finite element method. The tip back bend of MEAW taken in this analysis is $5^{\circ},\;10{\circ}\;and\;15{\circ}$. In addition, Class II or up & down elastic is applied to find out stress distribution and their values in PDL. A adult male of normal occlusion was selected to create the models of teeth and PDL. And the model of MEAW was also created using commercial finite element code (ANSYS version 5.2). The MEAW is forcibly engaged with a class II or up & down elastic, to determine the initial stress generated in PDL. Comparing the compressive and tensile stress at each reference-planes, following results are obtained. 1. When a MEAW of $5^{\circ},\;10{\circ}\;15{\circ}$ tip back bend was engaged with Class II or up & down elastic, the distribution of compressive, tensile stress in entire PDL is similar in each case. 2. The values of compressive and tensile stress in PDL is higher in $15{\circ}$ tip back bend case than in $10{\circ}\;or\;15{\circ}$ tip back bend case. 3. In the distal PDL of 1st and 2nd molar, compressive stress appears. The compressive area is more wide and its values is higher in PDL of 2nd molar than those in 1st molar. The compressive area and its values become more wide and higher according to the increase of the tip back bend. 4. The values of compressive stress are comparatively smaIIer in PDL of molars than those in premolars. 5. Comparing class II and up & down elastic case, tensile stress values in anterior teeth PDL are smaller md their distribution is more wide in up & down elastic case than class If elastic case. On another hand, there is no difference in distribution and stress values in PDL of posterior teeth between two cases. 6. Comparing the tensile area in PDL of anterior teeth, tensile stress values are maximum in PDL of canine.

• Journal of the HCI Society of Korea
• /
• v.12 no.2
• /
• pp.21-29
• /
• 2017

While the second and the third industrial revolutions made it possible a few standardized designs to be extracted and produced in large quantities, the recent development of the 3D printing technology allowed many individuals to reflect their unique personal characteristics on their creative works and produce them in large quantities-i.e., personally customized designs and mass production of various designs. However, for the customized designs and the mass production of various designs through the 3D printing technology, the individuals should use a 3D modeling software and the supporting features of the software can significantly affect the type and shape of a creative work. In this study, we surveyed the individuals who design the creative works using 3D printers about the type of software that they use and the type of creative works that they design using the software, to propose a possible direction of new software that supports their activities. To do this, we first surveyed sixty members of the OpenCreators, which is the largest 3D printing creator community in South Korea, about the 3D modelling Software that they use for their 3D printing creations, the best 3D modelling software for the 3D printing, and the type of frequently printing creation using the best 3D modelling software. We then analysed the response results. As a result, we found that most of 3D printing creators in South Korea use Rhino and 123D Design. More specifically, the Rhino was being widely used by the people in the 3D printing industry to print prototypes, samples, and mock-ups, while the 123D Design was being mainly used for general purposes such as educational tools, accessories, and home interior accessories. Therefore, we believe it is necessary to develop the software in two separated categories, i.e. for the business, like the Rhino, and for the beginners, and educational and personal purposes, like the 123D Design. Finally, we stressed and proposed the necessity to support individual creators by developing an industry-specific 3D modeling software.

• Journal of The Korean Association For Science Education
• /
• v.33 no.1
• /
• pp.144-160
• /
• 2013

This study is a proposal, which is the trial to explicate, in neurology, on how critical thinking as a creative method of sciences functions. The creative methods of sciences, even at present, are mostly the hypothetical insistences concerning with the logical processes of researches suggested from the philosophers of science; Popper, Kuhn, Hempel, or Lakatos. These insistences do excavate what process or approach can be scoped out of scientists' creativity. I call the tendency or approach of the researches, "Process Approach of Creativity (PAC)". From my view point, any PAC trial does not concern with how creative theories can actually be invented. On the other hand, this study is focused on the philosophical thinking abilities of scientists who invented new great theories. They mostly had some experiences to study philosophy while studying their science fields, thus had critical thinking abilities on their studies. From my point of view, critical thinking in philosophy raised questions as to their fundamental and basic (old) concepts and principles, and thus gave them new creative theories. I will try to explain this from the point of neurophilosophy. From the perspectives coming from "the state space theory of representation" of Paul & Patricia Churchland, the pioneers of neurophilosphy, the "creative theories" are the networks of topographic maps giving new comprehensive explanations and predictions. From these perspectives, I presuppose that the attitude of critical questioning revises the old networks of maps with back-propagation or feedback, and thus, is the generative power of searching new networks of maps. From the presupposition, I can say, it is important that scientists reflect on the basic premises in their academic branches for issuing out extraordinary creativity. The critical attitude of philosophy can make scientists construct the maps of new conceptual scheme by shaking the maps of the old basic premises. From this context, I am able to propose "Critical Thinking Approach of Creativity (CTAC)".

• Tuberculosis and Respiratory Diseases
• /
• v.39 no.2
• /
• pp.120-130
• /
• 1992

Background: Although there have been many studies on the pathogenetic mechanism of acute lung injury, it is still elusive. Recently interests have been focused on the role of oxygen free radicals. But the effect of hydroxyl radical on the neutrophil mobilization and the alveolar-capillary permeability is not clear especially in the endotoxin-induced acute lung injury model of rats. This investigation was performed to evaluate the pathogenetic role of hydroxyl radical on the neutrophil accumulation into the lung and the increased alveolar-capillary permeability in the endotoxin-induced acute lung injury in rats. Method: Fifty rats were divided into four groups: vehicle control group (n=5, 6hrs; n=5, 24hrs), endotoxin-treated group (n=10, 6hrs; n=10, 24hrs), Dimethylthiourea (DMTU)-pretreated group (n=10, 6hrs), and deferoxamine (DFX)-pretreated group (n=10, 6hrs). Thirty minutes before sacrifice, $^{125}I$-tagged bovine serum albumin was injected. Six and twenty four hours after endotoxin injection, the rats were sacrificed, and the radioactivity of lung tissue and peripheral blood was counted. Permeability index was defined as the ratio of radioactivity between lung tissue and peripheral blood. Another set of rats (n=52) were divided into the same four groups as before [vehicle control group (n=5, 6hrs; n=5, 24hrs), endotoxin·treated group (n=7, 6hrs; n=8, 24hrs), DMTU-pretreated group (n=6, 6hrs; n=9, 24hrs), and DFX-pretreated group (n=5, 6hrs; n=7, 24hrs)], and were sacrificed 6 and 24 hours after endotoxin injection. In these rats, cell profile of peripheral blood and bronchoalveolar lavage fluid was evaluated, and the pathologic examination of lung tissue was performed. Results: 1) Increased alveolar-capillary permeability was observed 6 hours after endotoxin injection, which was normalized after 24 hours, and this increase was attenuated by pretreatment with DMTU and DFX. 2) Neutrophil sequestration into the lung was observed 24 hours after endotoxin administration, but this was not influenced by DMTU and DFX pretreatment. Conclusion: These results suggest that hydroxyl radical would not be involved in the sequestration of neutrophils into the lung, but plays an important role in the increase of alveolar-capillary permeability in the endotoxin-induced acute lung injury in rats.

• The Journal of the Korean bone and joint tumor society
• /
• v.6 no.1
• /
• pp.1-9
• /
• 2000

Purpose : Spine is one of the most common sites of the metastatic bone tumors. Conservative management such as chemotherapy or radiotherapy has been preferred in most cases. However, the neurologic deficit has not been usually improved, and the quality of life was poor. The purpose of this study was to show the efficacy of the surgical treatments for metastatic spinal tumors in terms of postoperative improvements of neurologic deficit and survival time. Materials and Methods : Authors have reviewed the literatures and analyzed 14 patients of metastatic spinal tumors who were received operative treatments between August 1991 and June 1999 at the our department of orthopaedic surgery. Results : The most frequent primary tumor was breast cancer in women and lung cancer in men. The thoracic region was the most common site. There was a preponderance of females over males, and the age ranged between 4th and 8th decade. The indications of surgical treatment comprised instability, progressive neurologic findings, resistance to radiotherapy, pathological fracture, long life expectancy( >6weeks), isolated metastasis and need for pathological diagnosis. The degree of preoperative neurological deficit might influence on the improvement of clinical symptoms after surgery. Conclusion : The surgical treatment reduced the neurological deficit and pain regardless of the operative methods. In the early stage of neurological deficit, the surgical treatment was important for better prognosis. Recently early active operative treatment was performed for metastatic spinal tumor to minimize the intractable pain and to prevent the progression of the neurologic deficit. Early intervention can improve the quality of life and long term survival.

• The Journal of the Korean bone and joint tumor society
• /
• v.20 no.1
• /
• pp.14-21
• /
• 2014

Purpose: To analyze the clinical features and treatment outcome of Langerhans' cell histocytosis. Materials and Methods: From August 1996 to June 2013, 28 patients who histologically proven with LCH were analyzed of medical records, radiography, pathologic character retrospectively. Results: A total of 28 cases of LCH including 22 child has been reported. Onset age was 0.6 to 51 years old, occurred in the average age was 14.8 years. Follow-up period was 6 months to 134 months average was 44.6 months. The M:F ratio was 2.5:1. The initial symptoms was pain in 18 cases, 5 cases of pathologic fracture, 3 case of palpable mass, 1 case of discovered by accident in radiography, 1 case of torticollis. In radiological examination osteolysis was seen all cases, 7 cases showed a periosteal reaction, 1 case showed soft tissue extension. Clinical type of all cases were eosinophilic granuloma. 25 cases were classified as unifocal disease and 3 cases were multifocal single systemic diseases. In all cases, incisional biopsy was performed. After histologic confirmed, 14 cases was treated with curettage or surgical excision of the lesion and the other 14 cases were followed up without treatment. There is no death during follow up period. 11 cases has no radiological improvement after 3-6 months observation, intralesional steroid injection was performed. Conclusion: Patients with LCH who has rapid systemic onset is very rare, so if you meet the young children who suspected LCH, you shoulder avoid the examination which cause excessive radiation exposure to the young patient. In order to confirm the diagnosis of disease, biopsy is needed. Close observation after confirmed by histological method will bring the satisfactory results. But the patients who had pathologic fracture or wide bone destruction already may need curettage and bone grafting to lesion or internal fixation. The lesion which has no radiological improvement after 3-6 months observation or appear with pain interferes daily life may need local steroid injection as a good treatment.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.11
• /
• pp.111-119
• /
• 2019

The high-speed railway system is mainly composed of tunnel, bridge, and viaduct to meet the straightness needed for keeping the high speed up to 400 km/s. Seismic fragility for the high-speed railway infrastructure can be assessed as two ways: one way is studying each element of infrastructure analytically or numerically, but it requires lots of research efforts due to wide range of railway system. On the other hand, empirical method can be used to access the fragility of an entire system efficiently, which requires case history data. In this study, we collect the 2004 M_W 6.6 Niigata earthquake case history data to develop empirical seismic fragility function for a railway system. Five types of intensity measures (IMs) and damage levels are assigned to all segments of target system for which the unit length is 200 m. From statistical analysis, probability of exceedance for a certain damage level (DL) is calculated as a function of IM. For those probability data points, log-normal CDF is fitted using MLE method, which forms fragility function for each damage level of exceedance. Evaluating fragility functions calculated, we observe that T=3.0 spectral acceleration (SA_T3.0) is superior to other IMs, which has lower standard deviation of log-normal CDF and low error of the fit. This indicates that long-period ground motion has more impacts on railway infrastructure system such as tunnel and bridge. It is observed that when SA_T3.0 = 0.1 g, P(DL>1) = 2%, and SA_T3.0 = 0.2 g, P(DL>1) = 23.9%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.9
• /
• pp.1501-1514
• /
• 2004

The purpose of this study was to evaluate the health condition and nutritional status in female university students in Masan. The 285 subjects aged 20.1 years (18~26 years) were assessed with a set of questionnaire composed of general information, food, smoking, drinking and exercise habits, anthropometric measurements, blood pressure measurements, 24-hour recall and food frequency questionnaire. The rates of smoking and alcohol drinking habits were 1.8% and 82.5%, respectively. All the subjects had the experience of passive smoking. The 11% of the students exercised regularly and 11.6% ate meal regularly. The average height and weight of subjects were 161.0 ㎝ and 53.9 ㎏, respectively and the BMI was calculated as 20.8${\pm}$2.6 ㎏/$m^2$:The 13.3% of subjects were underweight, while 6.7% of them were overweight. The mean value for body fat was 26.4% and subscapular and tricep skinfolds thickness were 14.2 ㎜ and 16.9 ㎜, and waist-hip ratio was 0.72. The systolic/diastolic blood pressure of the subjects was 115.9 ㎜Hg/70.9 ㎜Hg. Except protein, phosphorous, vitamin E, B_6 and C, the average intakes of energy and nutrients were below the Korea recom-mended dietary allowance (RDA). Especially, intakes of calcium, iron and zinc were the lowest, as <70% of RDA. The proportion of energy derived from carbohydrates : protein : fat was 58.0 : 15.8 : 26.2. The 10 frequently consumed food were ssalbap (47.2/mon), kimchi (35.6/mon), onion (16.8/mon), japgokbap (15.1/mon), sesame oil (14.1/mon), carbonated drink (13.3/mon), grapes (12.7/mon), ice cream (12.4/mon), milk (11.9/mon) and water-melon (10.6/mon). Results of this study could be useful for planning nutrition education programs for female university students in this area to improve their dietary habit and health status.