• Journal of the Korean Geotechnical Society
• /
• v.18 no.4
• /
• pp.319-327
• /
• 2002

In this research, problems of recent design methods and their improvement for SIP(Soil-Cement Injected precast Pile) in domestic areas were studied by using the properties of load-settlement curves and bearing capacity from field loading tests. Elastic and plastic settlement for total settlement in each loading step of loading tests conducted in domestic areas has been shown to have a tendency. From this tendency and bearing capacity determined by loading tests, it could be ascertained that empirical chart could be an assistant tool in SIP design. It was shown that SIP design using N-value in domestic area with soil condition of granitic type resulted in very conservative hearing capacity. On the other hands, in soil with unfitted geological conditions, the design could be insecure. Also, we could ascertain that Meyerhof's bearing capacity using modified N-value on the tip part of pile was more applicable than recent design method where tip bearing capacity was 20NA$_p$ N-value limited to 50. These results showed that modified design method could be more economic than those in the past because it used pile's bearing capacity unto tolerable load of pile material.

• Journal of Korean Society of Forest Science
• /
• v.76 no.2
• /
• pp.161-168
• /
• 1987

Forest road (10 Km) constructed for the demonstrational purpose by Forest Work Training Center (F.T.C.) in 1984 was partly damaged through the roadside landside and ditch erosion by the typhoon in 1986. The causes were investigated to apply for protecting against the damage of mountain forest road. The damaging length caused by roadside landside is around 3% out of total length of 10 Km forest road, and mostly coming from the curve road filled up more than 10 m slope length on the concave mountain slope, partly from the foot of fillslope along the ever-following valley and from the both side of fillslope under the outlet of culvert with ever-flowing water. In case of ditch erosion, the big damage at V-type ditch is coming from the overflow of valley water flowing down along the inside slope. Other problem is also showing in the steepness of longitudial gradient, which is felt as a problem in road to be constructed under more than 10 persent of gradient. Other cause of ditch erosion is coming from the bury of sand basin (water collecting wall) by the debris in small diameter culvert zone, namely less than 400mm, in diameter and by the soil mass slumped down from steep wall slope. From above results the causes of F.T.C. model road damage is showing to come from no-following the general guide or little experience to protect against the forest road damage. When improved above mentioned mistakes, F.T.C. Method of mountain forest road type could be developed as a model of Mountain forest road.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.107-116
• /
• 2014

A volume density of roughness correction blocks in a channel is defined and the corresponding roughness coefficient(n) is estimated by analyzing the diverse hydraulic characteristics of VR, the product of the average velocity and the hydraulic radius, block Reynolds number ($Re^*$), drag coefficient ($\acute{C}_D$), and the roughness coefficient ($n_b$) of bottom shear. The increase of VR and block Reynolds number causes the exponential decrease of roughness coefficient converged to a constant value as expected. The drag coefficient also exponentially decreases as block Reynolds number increases as well. The drag force is governed by the block shape defined by volume density in high block Reynolds number of turbulent flow region. For more accurate estimation of roughness coefficient the use of the correlation equation of it is required by block Reynolds number and volume density. The regression equations for n-VR, $\acute{C}_D-Re^*$, and $n_b-\acute{C}_D$ are presented. The regression equations of roughness coefficient are also presented by block Reynolds number and volume density. The developed equation of roughness coefficient by block Reynolds number and volume density has practical use by confirming the coincidence between the experimental results and the results of HEC-RAS using the developed equation.

• Tunnel and Underground Space
• /
• v.10 no.2
• /
• pp.180-195
• /
• 2000

Grouting has been practiced as a reliable technique to improve the mechanical properties of rock mass. But, the study of ground improvement by greeting is rare especially in jointed rock mass. In this study, joint compression test and direct shear test were performed on pure rock joint and cement milk grouted rock joint to examine the grouting effect on the property of rock joint. In the pure rock joint compression test, joint closure varied non-linearly with normal stress. But after cement milk grouting, the normal deformation characteristics of the joint was linear at the low normal stress level. As normal stress increased. deformation of the sample rapidly increased due to the stress concentration at the joint asperities. Peak shear strength of the grouted joint in low normal stress was higher than that of non-grouted joint due to the cohesion, decreased exponetially as the grout thickness increased. Thus after cement milk grouting, the failure envelope modified to a curve that has cohesion due to grout material hydration with decreased friction angle. Shear stiffness and peak dilation angle of the grouted joint decreased as the grout thickness increased. The peak shear strength from the direct shear test on grouted rock joint was represented by an empirical equation as a fuction of grout thickness and roughness mean amplitude.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.4
• /
• pp.210-217
• /
• 2003

An alternative method to the empirical approach such as Langmuir and Freundlich model, surface complexation model using thermodynamic database is used to simulate adsorption behavior of cadmium for oxide minerals. Sorption of cadmium onto amorphous silica ($SiO_2$) and synthetic goethite (${\alpha}$-FeOOH) at various conditions of pH, initial cadmium loading, oxide concentration, and ionic strength, were investigated. For both oxide minerals, increasing cadmium concentration resulted in right shifting of the sorption curve of cadmium as the function of pH. The $pH_{50}$, where 50% of cadmium sorbed, of goethite (pH 5.25) was much smaller than that of the silica (pH 7.83). The sorption of cadmium onto both minerals were not affected by the background ion strength from $10^{-1}$ to $10^{-2}$ M of $KNO_3$. It indicated that the binding affinity of goethite surface for cadmium is much stronger than that of silica. The strong affinity of oxide mineral for cadmium can be explained by the existence of coordination or covalent bond between cadmium and surface of it.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.35-41
• /
• 2002

This research introduces the development of a project-level cash flow forecasting model in construction stage based on the planned earned value and the cost from a general contractors view on a jobsite. Most previous models have been developed to assist contractors in their pre-tendering or planning stage cash flow forecasts. The critical key to cash flow forecasting at the project level is how to build a cash-out model. The basic concept is to use moving weights of cost categories in a budget over project duration. The cost categories are classified to compile resources with almost the same time lags that are based on contracting payment conditions and credit times given by suppliers or venders. For cash-in, net planned monthly-earned values are simply transferred to the cash-in forecast, to be applied there with billing time and retention money. Validation of the model involves applying data from on-going 4 projects in progress for 12 months. Based on the results of the comparative analyses through the simulation of the proposed model and the existing models, the proposed model is more accurate, flexible and simpler than traditional models to the employee of construction jobsite who is not oriented financial knowledge.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.1
• /
• pp.181-190
• /
• 2016

Improvements in disaster management has become a global necessity because the magnitude of disasters is intensifying in parallel with the increased disaster damage. The disaster risk in Korea is also increasing due to the emergence of new types of disaster; such as the Middle East respiratory syndrome coronavirus, the increase of complex disasters, and the heightened probability of a catastrophic event due to climate change. This paper aimed to identify the disaster loss-frequency relationship from 1948 to 2014 in Korea by using four types of variables. In addition, this paper found major disasters that resulted in the reformation of disaster response organizations, and inputted the deaths and economic loss attributed to those disasters into the disaster loss-frequency graph. The research result substantiated that the disaster loss-frequency relationship in Korea follows the Power Law and found the coefficients of each Power Function. Additionally, this paper found that most of the reformations of disaster response organizations happened after major disasters that concentrated societies attention and anger due to the high human and economic impact; such events are labelled as "focusing events." These focusing events, with the characteristics of a low probability and high impact, are located in the long tail of the Power Law Distribution. This paper suggests that the effective public policy for disaster response needs to be developed by paying attention to 'low probability and high impact' focusing events that are located in the long tail of the Power Law Distribution.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.490-494
• /
• 2008

본 연구에서는 상수도 배수관로의 내 외부적 특성에 따라 개별관로를 정의하는 방법을 연구대상 지역의 배수관로 파손 데이터베이스에 적용하여 비례위험모형을 구축하였다. 연구에 사용된 자료는 연구대상지역의 배수관로의 제원 및 파손시기를 포함하는 관로 파손데이터베이스, 관로매설지역의 급수인구 및 수압범위에 관한 자료를 포함하는 GRID 데이터베이스와 관로매설지역의 토지개발 정도에 관한 자료를 포함한다. 이러한 자료를 이용하여 관로를 순차적 파손경험에 따라 7개의 생존시간군(STG I $\sim$ VII)으로 구분하고 각 생존시간군에 대한 비례위험모형(Model I $\sim$ VII)을 구축하였다. 이러한 모형을 이용하여 관로의 파손횟수가 증가하는 동안 파손에 영향을 미치는 인자의 변화와 그 효과를 파악하였으며, 또한 추정된 공변수의 위험비율을 분석함으로써 관로의 제원 혹은 매설환경, 급수인구 등에 따른 위험률의 상대적인 변화를 분석하였다. 또한 비례 위험모형의 구축과정에서 관로의 파손에 영향을 미치는 공변수의 비례성 가정을 검토하여 시간종속형 공변수를 모형화하였으며, 모형의 이탈잔차(deviance residual)를 분석하여 모형의 적합성을 검토하였다. 본 연구에서 구축된 비례위험모형에 대해 Shoenfeld 잔차를 이용한 스코어 잔차의 변화(score process)를 검토한 결과, Model I 과 Model II 에 대해서는 공변수의 시간종속 효과가 발견되었다. Model I에 대해서는 관로재질과 급수인구의 영향이 시간에 따라 변하며 Model II에서는 급수인구의 영향만이 시간에 따라 변하는 것으로 나타났다. 한편 Model III $\sim$ Model VII 들에 대해서는 공변수의 영향이 시간에 따라 변하지 않는 것으로 나타났다. 각 생존시간군에 대해 관로재질, 토지개발정도, 관로길이 및 급수인구의 변화가 관로의 상대적 누수위험률에 미치는 영향을 상대위험률의 95% 신뢰구간을 고려하여 정량적으로 산정하였고, 시간 종속형 공변수로 모형화된 공변수는 시간에 따른 공변수 영향의 변화를 분석하였다. 순차적 파손사건에 대한 비례위험모형의 구축 결과 생존시간군(STG) I의 기저위험률은 매설 후 대략 450개월까지는 파손 위험률이 '0'에 가까우나 그 이후로 급격히 증가하다가 매설 후 약 700개월에 이르러서는 약간 감소하고 약 850개월 이후에는 다시 급격히 증가한다. STG II의 기저위험률은 첫 번째 파손 후 약 300개월이 되면 위험률이 급격히 증가하는 것으로 나타났다. STG III $\sim$ STG VII의 기저위험률은 이차함수의 형태를 띄며, 특히 STG V, STG VI 및 STG VII의 기저위험률은 욕조형 곡선(bathtub curve)의 형태를 가진다. 각 생존시간군의 기저생존함수의 생존확률 '0.5'에 해당하는 기저중간생존시간에 대한 분석으로부터 파손횟수가 많아질수록 순차적 파손사건 사이의 경과시간은 감소하는 것으로 나타났다. 이러한 기저생존시간에 대한 경향은 관로의 파손횟수가 많아질수록 관로의 일반적은 내구성은 감소하기 때문인 것으로 분석된다.

• Journal of Korea Water Resources Association
• /
• v.51 no.3
• /
• pp.263-272
• /
• 2018

For the design of hydraulic structures, the design flood discharge corresponding to a specific frequency is generally used by using the design storm calculated according to the rainfall-runoff relationship. In the past, empirical equations such as rational equations were used to calculate the peak flow rate. However, as the duration of rainfall is prolonged, the outflow patterns are different from the actual events, so the accuracy of the temporal distribution of the probability rainfall becomes important. In the present work, Huff's quartile method is used for the temporal distribution of rainfall, and the third quartile is generally used. The regression equation for Huff's quadratic curve applies a sixth order polynomial equation because of its high accuracy throughout the duration of rainfall. However, in statistical modeling, the regression equation needs to be concise in accordance with the principle of simplicity, and it is necessary to determine the regression coefficient based on the statistical significance level. Therefore, in this study, the statistical significance test for regression equation for temporal distribution of the Huff's quartile method, which is used as the temporal distribution method of design rainfall, is conducted for 69 rainfall observation stations under the jurisdiction of the Korea Meteorological Administration. It is statistically significant that the regression equation of the Huff's quartile method can be considered only up to the 4th order polynomial equation, as the regression coefficient is significant in most of the 69 rainfall observation stations.

• Applied Chemistry for Engineering
• /
• v.29 no.2
• /
• pp.237-243
• /
• 2018

The surface chemistry of WCK-AC, WCN-AC and WCZ-AC which are activated carbons prepared from waste citrus peel using KOH, NaOH, and $ZnCl_2$ as activating chemicals were investigated. Also the relationships between the adsorption capacities of the target gases such as acetone, benzene and methyl mercaptan (MM) by the prepared activated carbons and the pore characteristics of each activated carbon were examined. According to XPS analysis of the prepared activated carbons, graphite and phenolic were the main surface functional groups of C1, and the sum of phenol, carbonyl and carboxyl groups increased in the order of WCK-AC > WCN-AC > WCZ-AC. The breakthrough curves obtained from the adsorption experiments for the three target gases in the fixed bed adsorption reactor were well simulated by the empirical equations proposed by Yoon and Nelson. The adsorption capacity for acetone, benzene and MM was larger for activated carbons with the larger sum of surface functional groups. The larger the specific surface area and the pore volume of activated carbons and the smaller the pore size, the better the adsorption performance. In particular, the specific surface area was the best criterion for the adsorption performance of activated carbons used in this study.