• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.1
• /
• pp.60-65
• /
• 2017

This study was conducted to dentify the optimum plantlet type of 'Solara' potatoes (Solanum tuberosum L.) for growth in an aeroponics system. Plantlets of 'Solara' were transplanted on March 16, 2015 in a greenhouse, and growth and yield characteristics were investigated at 70 and 78 days after transplanting, respectively. Stem length was shorter in plantlet of 15-day-old stem cuttings and acclimatization of culture, and the stem length of plantlets of stem cuttings tended to increase with increasing stem cutting age. The fresh weight of plants was the highest in the plantlets of 40-day-old stem cuttings and the lowest in non-rooted stem cuttings and acclimatization of culture. The highest number of first stolons was obtained in 35-day-old stem cuttings. The number of second stolons was the highest in plantlets of 35-day-old stem cuttings, acclimatization of culture, and 30- day-old stem cuttings. The total number of tubers was higher in plantlets of 35-day-old stem cuttings and acclimatization of culture, and the number of tubers above 3 g was the highest in plantlets of 35-day-old stem cuttings. The weight of tubers above 3 g was the heaviest in plantlets of 35-day-old stem cuttings(1,947 g per 10 plants), followed by plantlets of 30-day-old stem cuttings. These results indicate that plantlets of 30 to 35-day-old stem cuttings could be the best for production of 'Solara' potato tubers in an aeroponics system.

• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.261-265
• /
• 2008

This study was carried out to investigate the effects of stem cutting ages and harvest time on the growth and yield of potato 'Dejima' in aeroponics. The stem cuttings were produced from in vitro plantlets and transplanted into an aeroponic system with 20, 30, 40 and 50 day-old stem cuttings (DOS). Tubers were harvested 60, 70, 80 and 90 days after transplanting (DAT) and sorted into following categories: $1{\sim}5$, $5{\sim}10$, $10{\sim}20$, $20{\sim}30$, $30{\sim}40$ and over 40 g. Plant height from the 40 DOS was the highest during the growing periods but no significant difference was observed on 75 DAT. The tuber weight increased until 90 DAT with the greatest weight of tubers in the 20 and 40 DOS. However, there was no significant difference among 20, 30 and 40 DOS in the number and weight of tubers. Harvesting at 80 and 90 DAT increased the number of tubers over 5 g, which are usually considered as appropriate for direct field planting.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.2
• /
• pp.83-86
• /
• 1997

To produce and supply the healthy potato, basic seed potatoes were produced by stem cutting, microtuberization and hydroponic culture. The total number of tubers and the total tuber weight per $\textrm{m}^2$ of potato were more in hydroponic culture as each products were 1, 152 and 4, 492g than in the stem cutting (75 and 4, 136g) or microtuberization (1, 080 and 1, 080g) using petridishes. The total yield per 10a in the field was propagated highly stem cutting > propagated microtubers > hydroponics > microtubers. The number of tubers per 10a produced by hydroponics (33, 064) was higher than any other methods. This indicated the hydroponic culture can be used in the multiplication of basic seed potatoes.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.468-476
• /
• 2020

This study was performed to establish light intensity conditions for producing stem cuttings for aeroponic systems suitable for seed potato production using a closed-type plant production system. Shoot tip cultured plantlets of 'Sumi' and 'Chubaek' potato (Solanum tuberosum L.) were acclimatized, cuttings were collected, and stem cuttings were planted. The seedlings were raised for 40 days at different LED light intensities (60, 120, 180, and 240 μmol·m^-2·s^-1), and were cultivated in an aeroponic system for 80 days. When stem cuttings were raised at 60 μmol·m^-2·s^-1 LED light intensity, the plant height was the longest, at 17.3 cm for 'Sumi' and 16.1 cm for 'Chubaek', and the number of nodes was the highest in both cultivars. The higher light intensities, produced smaller plants with fewer nodes. The leaf areas, SPAD values, and Fv/Fm values differed slightly between cultivars. The fresh weight of stem cuttings, and the production rate of healthy stem cuttings were the highest at 60 μmol·m^-2·s^-1. In the aeroponic system, seedlings raised at 60 μmol·m^-2·s^-1 with LED light intensity showed a difference between the cultivars, but the fresh weight of stems and leaves above the planting plate was the heaviest. In addition, below the planting plate the stem cuttings were longest and the root weight was heaviest at 60 μmol·m^-2·s^-1 LED light intensity. The number of stolons also differed between cultivars, but was greatest for seedlings raised at 60 μmol·m^-2·s^-1 LED light intensity, at 4.2/plant for 'Sumi' and 7.7/plant for 'Chubaek'. At 60 μmol·m^-2·s^-1 LED light intensity, the tuber number and total tuber weight were the best, but the higher the light intensity, the smaller the total tuber number and total tuber weight for both cultivars. In conclusion, when producing potato stem cuttings for aeroponic systems using a closed-type plant production system, the most suitable LED light intensity for raising seedlings was found to be 60 μmol·m^-2·s^-1.

• Korean Journal of Organic Agriculture
• /
• v.10 no.2
• /
• pp.111-120
• /
• 2002

This study was conducted to investigate the effect of foliar application of Chitosan and seedling types on increasing the production of fall-growing potatoes(Solanum tuberosum) at the height of 250m from the sea in Jeju Island. The experiment main-plots consisted of four Chitosan applications, and subplots had three seedling types as cutting plug seedlings, mine-tuber plug seedling planting plot and seed potatoes planting plot. The foliar application of Chitosan of 2000ppm was carried out 0, 1, 3, 5 times at intervals of ten days after ten days of transplanting. Plant height and top dry weight were significantly more vigorous as three to five application of Chitosan. In the small tubers(under 80g), the number of tubers and tuber yield were relatively increased in the seed potatoes planting plot and mine-tuber plug seedling plot, but the large tubers(over 80g) was higher in the cutting plug seedling planting plot. T-N content in leaves was increased as the number of application of Chitosan was increased. A similar tendency was shown in K, P Ca, Mg and Na. The growth and tuber yield in cutting plug seedlings, mine-tuber plug seedling planting plot and seed potatoes planting plot were effectively increased as three to five foliar applications of Chitosan was increased.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.3
• /
• pp.147-151
• /
• 2003

Normal seed tubers and plug seedlings raised from stem cutting and mini-tubers ($10\pm3$ g) were planted or transplanted on August 20,2001 in bare soil or under transparent and black polyethylene film mulches to evaluate the effects of mulch material and seedling type on the growth and tuber yield of fall-grown potato (Solanum tuberosum L. cv. Dejima) in Jeju region. Total tuber number per plant was 4.6 regardless of mulch treatment, and direct planting seed potatoes resulted in the greatest tubers (5.14)/plant and followed by transplanting seedlings raised from cutting and mini-tubers (4.15 and 5.15 tubers/plant). Transparent and black polyethylene film mulches increased total tuber yield by 16 and 8%, respectively, and average tuber weight by 14 and 12%, respectively, compared with no mulch (21.16 t/ha and 72.2 g/tuber). Transplanting plug seedlings raised from cutting resulted in the greatest tuber yield, followed by transplanting plug seedlings raised from mini-tubers and direct planting seed potatoes.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.4
• /
• pp.504-508
• /
• 1983

To define the effects of synthetic auxins on rooting from the ginseng stern cutting and the root growth in diameter after the rooting of the cuttings, stern cuttings with palmate leaves obtained from seedlings and 2-year old ginseng plants were planted in rooting media treated with solutions of the synthetic auxins. All the roots induced from the cuttings were adventitious fibrous roots at first, but a few adventitious roots of the cutting were thickened in diameter to over 2 to 3mm at 120 days after cutting and the rest of them disappeared. IBA was the most effective auxin for rooting and root growth in diameter after rooting from the cuttings. The shape of the roots that thickened in diameter could be divided into two types. Both types of thickened roots were fully lignified at 120 days after cutting and those thickened roots did not dry up or die by July of the next year, however no rhyzomes or shoot primodia were induced from them.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.72-77
• /
• 1982

To develop a new propagation method of Korean ginseng (Panax ginseng C.A. Meyer) by cutting, stem cuttings with leaflets obtained from ginseng seedlings were planted in rooting media treated with three levels of NAA concentration. NAA solution of 1.0 ppm was the most effective for the rooting of ginseng stem cuttings as well as for root growth after initiation of the roots from cuttings. A mixture of sand and leaf compost as a rooting medium for ginseng stem cuttings showed the best results in rooting percentage of cuttings and root growth after rooting. An acril film cap covering was very effective to prevent water loss by transpiration from the leaflets of stem cuttings and for rooting and root growth after rooting. Cuttings of leaf petiole with 5 leaflets from 2 year old ginseng plants showed good rooting as well as root growth after rooting in a mixture of sand and leaf compost treated with 1.0 ppm NAA.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.678-686
• /
• 1997

This experiment was carried out to develop the mass propagation system for producing plug plantlets using stem cuttings of virus-tree microtubers in potato. Cocopeat, vermiculite, perlite and peatmoss were combined and used as plug nursery media to find out the best combination suitable for the growth of seedlings derived from microtubers. Seedling growth was favored in high temperature (above 2$0^{\circ}C$) and a long-day photoperiod(above 16 hours) condition, while stolons and microtubers formed in outdoor condition. Shoot and root multiplication was not affected by NAA 10mg /1 or IAA 10mg /1 treatment. At the early growth stage of plug plantlets, the number of leaves and roots and the length of root increased significantly when nodes from the upper (near to apex) part of shoots rather than from basal part were taken. But after transplanting, these differences among these characters were not observed. At ninety days after transplanting the plug plantlets in spring time, plant was around 70 to 80cm in height, and the number of stolons and tubers were ten and seven, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.3
• /
• pp.191-195
• /
• 2003

This study was conducted in 2001 to develop a technique for mass production of superior seed tuber by using a wick culture system as an alternative plan to solve problems in hydroponic culture of potato. Potato (Solanum tuberosum L. cv. Dejima) plug seedings were planted on a styrofoam bed (volume $0.032\textrm{m}^3$) containing two different media (Jeju scoria + peatmoss and perlite + peatmoss, (1:2, v/v) mixture, respectively). Each bed was equipped with various number of wicks (2, 4, 6, 8 and 10 ea/bed). After harvest, the total porosity of both media was 83-85%. Bulk density of Jeju scoria + peatmoss was higher compared to that of perlit + peatmoss. However, the number of wicks did not influence to the bulk density. Conversely, moisture capacity of Jeju scoria + peatmoss was remarkably greater than that of perlite + peatmoss and was increased from 55 to 70% as elevating number of wicks. Although the number of wicks resulted in the areal growth of plants, the total yield and the weight of tuber were highest at the bed equipped with six wicks in both media.