• Restorative Dentistry and Endodontics
• /
• v.35 no.5
• /
• pp.374-379
• /
• 2010

Objectives: Nickel-titanium (Ni-Ti) rotary instruments have some unexpected disadvantages including the tendency to screw-in to the canal. The purpose of this study was to evaluate the influence of root canal curvatures on the screw-in effect of Ni-Ti rotary files. Materials and Methods: A total of 80 simulated root canals in clear resin blocks were used in the study. Canals with curvature of 0, 10, 20 and 30 degrees were instrumented with ProTaper instruments SX, S1, S2 and a ProFile of #25/0.06 to 1.0-2.0 mm beyond the initial point of root curvature. The screw-in force was measured with a specially designed device while canal was instrumented with a ProFile of #30/0.06 at a constant speed of 300 rpm. The data were subjected to one-way ANOVA and Scheffe multiple range test for post-hoc test. Results: Larger degree of canal curvature generated significantly lesser screw-in forces in all groups (p < 0.001). Conclusions: More attention needs to be paid when using rotary instruments in canals with less curvature than canals with more curvatures to prevent or reduce any accidental overinstrumentation.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.2
• /
• pp.79-87
• /
• 2017

In this paper, for 43 sites neighboring to western area of Gangwondo where disaster of debris flow occurred from 2006 to 2013, magnitude of debris flow was estimated from results of site investigation and correlation analysis between influencing factors to its magnitude was performed. Magnitude of channelized debris flow was found greater by 6.5 times of that of hill slope debris flow and approximately 5% of total volume was occurred at initiation part of channelized debris flow. As results of analyzing yield rate of debris flow, for channelized debris flow, yield rate values of $19m^3/m$ and $8m^3/m$ were obtained for total volume being over $10,000m^3/m$ as the large scale of debris flow and less than $10,000m^3/m$ respectively, and value of $5m^3/m$ was estimated for hill slope debris flow. As results of correlation analysis of influencing factors to magnitude of debris flow, runoff distance and erosion width were very highly correlated to its magnitude whereas average slope of basin and erosion depth showed relatively low correlation. In particular, value of erosion depth was in the range of 0.5-2.6 m, being similar range to the value proposed by Ikeya (1981). Triggering rainfall to debris flow such as continuous rainfall and maximum intensity of hour rainfall were analyzed to have low correlation with magnitude of debris flow.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.130-137
• /
• 2012

This study has conducted to develop new gabion wall systems with vegetation base materials for stream bank stability and rapid rehabilitation. Vegetation base materials are primarily compounded with fine soil, organic composts and peat moss as plant fibers, a water retainer and a soil improver. Normally gabion wall systems resist the lateral earth pressures or stream power by their own weight. Therefore, fill material must have suitable weight, compressive strength and durability to resist the loading, as well as the effects of water and weathering. In this project, 100 to 200-mm clean, hard stones are basically specified, and about 50-mm rubbles are also used. Test application of new gabion wall system carried out in the stream bank of a small stream in the Gwangreung experimental forest, belonging to Korea Forest Research Institute (KFRI) in December 16th, 2006. As a result of the analysis of hydraulic stability of new gabion wall system, gabion wall system has highest threshold shear stress when the gabion wall covered by vegetation. New gabion wall system is highly resistant to sliding and overturning because safety coefficients exceed 1.5. As a result of term of slope stability analysis of new gabion wall system by Bishop and Fellenius methods, stability of stream bank was highly increased after the construction of gabion wall. Therefore, new gabion wall system is effective to stabilize unstable stream bank.

• Journal of Korea Water Resources Association
• /
• v.50 no.11
• /
• pp.725-734
• /
• 2017

The main purpose of this study is to analyze runoff aggregation structure and energy expenditure pattern of Choyang creek basin within the framework of power law distribution. To this end geomorphologic factors of every point in the basin of interest, which define tractive force and stream power as well as drainage area, are extracted based on GIS, and their complementary cumulative distributions are graphically analyzed through fitting them to power law distribution. The results indicate that three distinct behavioral regimes are observed from the complementary cumulative distributions of three geomorphogic factors. Based on the parameter estimation of power law distribution by maximum likelihood drainage area and stream power can be judged as scale invariance factor without finite scale while tractive force as scale dependence factor with finite scale. Furthermore, it is judged that tractive force would not follow power law distribution because it shows limited complex system behaviors only within the small extent of scale. The exponent of power law distribution for drainage area obtained in this study by maximum likelihood is larger than the previous researches due to the difference of parameter estimation methodologies. And the exponent for stream power is smaller than the previous researches due to the scaling property of channel slope for the basin of interest.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.1
• /
• pp.38-46
• /
• 1982

The research was carried out to determine the division of juvenile and adult wood from the pattern of variables of wood quality indicators, to investigate general low of the size of juwenile wood and to study the characteristics of juvenile and adult wood. For this study some trees of Pinus koraiensis were selected and several wood quality indicators such as annual ring width. late wood percentage, tracheid length tracheid diameter, wall thicknes, and microfibril angles were measured. The results of this study were summaried as follows. 1) Juvenile and adult wood can be divided into radial variations of wood quality indicators. In this study juvenile wood might be classified as a large fluctuated region of radial wood quality variations in the nearest part to pith. 2) Juvenile wood was indicated as a part of nearly cylinderical shape, averaging 6-11cm in radius, near pith. 3) Number of rings from pith of juvenile wood was about 12-20 and was nearly constant in uniform growth trees among the forest stands. 4) Usually adult wood was formed within the about 5-10m above ground.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.3
• /
• pp.93-106
• /
• 2008

For agriculture is very highly dependent on climate and weather condistions, global warming seems to have a great impact on it, including its productivity, cultivation condition, product quality, and optimum cultivation location. In this study, we adopted geographical information system (GIS) in order to investigate the changes of Korea's cultivation area which are caused by global warming, especially with the examples of such tropical and sub-tropical fruits as lemon, fig, kiwi, orange, pomegranate, and mandarin. In terms of GIS techniques, we utilized the interpolate function for temperature changes, surface analysis function for slope, and raster calculator. Currently, these fruits's cultivation areas are in Jeju island and southern part of Korea. But these areas will be expanded according as our GIS model assumes $3^{\circ}C$ and $4.5^{\circ}$ increases of average and lowest temperature by the global warming in Korea. Optimum cultivation areas of these six fruits have two patterns; one is expansion and the other is belt shape shift. From the results of the study, we call for an urgent need of Korea government's policy and farmers' reasonable responses about global warming, which will be able to give more opportunities and better foods to Korea society in general.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.1
• /
• pp.99-108
• /
• 2012

To consider geomorphological and geological characteristics to Gatbawi(the 500th natural monument), it was investigated with the aspect of scale, form, mineralogy, chemistry and weathered state. Showing typically erosional features, micro-terrains as sea cliffs, sea notches, marine plateaus and tafoni developed well on coastal areas near the monument. Sea cliffs are vertical and form sea notches in their bases. Coastal terraces are 3.5m in width and 20m in trace. Tafoni are honey combed. The monument is mainly composed of quartz, plagioclase, microcline, biotite, sericite in mineral and corresponded to crystalline tuff dominated in quartz and plagioclase. It has 23.60~28.27 wt.% of $Al_2O_3$, 3.27~5.80 wt.% of $Na_2O$, and 0.11~0.20 wt.% of Cl in chemical contents, leveling higher than those of earth crust standards. It is considerably weathered on the basis of CAI(77.42~83.93%). The monument is very useful for natural perspective tourism and education. Therefore, it is necessary that several ideas as guide plates, observing telescope, explaining guider, education programs connected with related services, touring goods, picture for books on utilization on the monument must establish.

• Journal of Sericultural and Entomological Science
• /
• v.20 no.2
• /
• pp.15-19
• /
• 1978

In order to identify hormone activities which related to the changing of cutaneous tissue and pupal bodies and also to identify the interaction of corpora allata hormone and prothoracic glandular band hormone which act upon the metamorphosis of the insect. The item of treatment is carried out in 5 different times at the interval of about 12 hours after 4 weeks from the first feeding of 4th instar stage, and as far as 5th instar stage in concerned 6 times of item treatments have been carried out, at about 12 hours interval after 72 hours from the molting, Item treatments were, made in the stage of spring, autumn rearing, However, during the period of post mounting stage and pre pupation by picking out of corpora allata in 5 times at the interval of hours the following change of pupal colour is observed; 1) By an early pick out of 4th instar stage, the three molters are found in greater number, However, by a later pick out the four molters are found instead of others. 2) An abnormal colour is found in the three and four molters when comparing with the control molters. 3) The most of control molters have shown the normal colour except a few samples. 4) As shown in the table 1 and 2, the death number of item treatment is greater in the autumn rearing season. 5) The picking out of corpora allata of 5th instar stage, the post mounting stage and pre pupation period is affecting the change of colour. 6) As a final conclusion, the corpora allata hormone is closely related to the changing of pupal colour.

• Journal of Korean Society of Forest Science
• /
• v.110 no.3
• /
• pp.355-368
• /
• 2021

This study aims to identify appropriate tree species and crops for agroforestry target sites in North Korea based on ecological geography and site properties. To this end, an ecological geographic map (13 regions and 4 zones) of North Korea was made using satellite images and North Korean academic journal articles. The target agroforestry sites were selected and mapped according to 18 site conditions depending on 3 site characteristics, and the sites were divided into short-term and long-term target sites depending on the agroforestry management period. Finally, optimal combinations of 30 tree species and 19 crops were selected by overlapping the ecological geographic map and agroforestry target site map. For regions within the same zone, tree species and crops were almost similar; however, compared to regions in other zones, they differed. This is likely because the geographical climatic characteristics reflected in the ecological geographic map vary greatly from zone to zone. These results will be used to propose a combination of suitable tree species and crops that takes into account both management purposes and management types for inter-Korean forest cooperation in the agroforestry sector.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.409-418
• /
• 2019

Debris flows occur in mountainous areas due to heavy rains resulting from climate change and result in disasters in the downstream area. The purpose of this study is to estimate the impact force of a debris flow when a check dam according is installed in various locations in the channel of a highly mountainous area. A Finite Differential Element Method (FDM) model was used to simulate the erosion and deposition based on the equation for the mass conservation and momentum conservation while considering the continuity of the fluid. The peak impact force from the debris flow occurred at 0 to 5 sec and 15 to 20 sec. When the supplied water discharge was increased, greater peak impact force was generated at 16 to 19 sec. This means that when increasing the water supply, the velocity of the debris flow became faster, which results in increased energy of the consolidation between the particles of the water and the sediment made. If a number of check dams were to be set up, it would be necessary to investigate the impact force at each location of the check dam. The results of this study could provide useful information in predicting the impact force of the debris flow and in installing the check dams in appropriate locations.