• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.530-532
• /
• 2003

이 논문에서는 Semi-lightpath를 이용한 복구 경로의 준-동적 조합에 의한 WDM 망 복구 기법을 제안한다. 제안된 기법에서는 광파장 채널의 종단 노드간에 여러 개의 부분적인 대체 광파장 채널을 연결함으로써 복구를 수행한다. 이 방법은 정적인 복구 기법과 동적인 복구 기법의 장점을 모두 수용하여 빠른 복구 속도와 복구 동작의 유연성을 동시에 제공하며, 종단간 대체 경로를 여러개의 부분적인 대체 경로로 분할함으로써 복구 경로 및 예비 대역폭의 공유 정도를 높여 통신망 자원 이용의 효율성을 높일 수 있다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.7
• /
• pp.507-517
• /
• 2003

A single fiber failure in mesh-based WDM networks may result in the loss of a large number of data. To remedy this problem, an efficient restoration algorithm for a single fiber failure in the mesh- based WDM network is necessary. We propose a new algorithm for restoration scheme in WDM networks and compare it with previous schemes. Path restoration and link restoration are two representative restoration schemes which deal with only a single link failure. In this paper, we propose two kinds of efficient restoration scheme. In the proposed schemes the restoration path for each link failure is not secured. The mesh network is decomposed into a number of small loops. In one algorithm, any link failure in a certain loop is regarded as the failure of the loop and the restoration lightpath is selected by detouring the failed loop. In another scheme any link failure in a certain loop is restored within the loop. We compare performance of the proposed schemes with conventional path restoration scheme and link restoration scheme. Simulation results show that CPU time in the proposed schemes decreases compared with that in path restoration scheme and link restoration scheme, although total wavelength mileage usage increases by 10% to 50%.

• Journal of Internet Computing and Services
• /
• v.4 no.2
• /
• pp.1-9
• /
• 2003

Path restoration, which is needed to increase network survivability in MPLS networks, is a technology of supplying reliable service by delivering the traffics through restoring the paths when links or nodes of a working path are failed. In this paper, we propose a path restoration method using duplication of working paths for link failure as a method of restoring paths for the high priority traffics. The existing path restoration method transmits the traffics to the path restoration uniformly in regardless of the priority while link obstacle. It has a problem to take a long time to restore the connection of the high priority traffics. On the other hand, the suggested restoration method establishes the duplication path for the working path, which transmits the high priority traffics and transmit the traffics through the duplication path. It has a strong point to restore the connection quickly. Also, through simulation we analyze the performance of the restoration system using the duplication path and prove that the proposed restoration method is superior in performance to the existing restoration methods regarding to the high priority traffics.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.11
• /
• pp.1-11
• /
• 2002

To increase network survivability and to guarantee reliable services in MPLS networks, when failures occur either at any link or node of a working path, traffics on the failed path should be switched to other restoration paths. In this paper, we propose a path restoration method using duplication of working paths for link failure and its associated failure detection method, which utilizes OAM cells when all the duplicated links or nodes of the path failed. We analyze the performance of the proposed restoration method and show that especially the method is very efficient to restore high priority traffics. Also, through simulation we prove that the proposed restoration method is superior in performance to several existing methods suggested so far.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.1
• /
• pp.41-47
• /
• 2002

Path setup considering QoS is one of the main problems to solve in Internet traffic engineering. In network restoration that is one of the traffic engineering components, to establish a backup path or backup path for a working path to be protected is the main task. The backup path should have enough bandwidth to guarantee the working paths. Thus this work requires the QoS routing solution that is to set up a backup path as well as a working path at the same time provisioning enough bandwidth. In this paper, we propose an algorithm to setup a backup path that shares the bandwidth of other backup paths whose working path does not pass along the same link with the working path we are considering. In this way we can reduce much bandwidth consumption caused by setting up backup paths. We also analyze the disjoint path computation algorithms. Finally we show simulation results how the algorithm can reduce the bandwidth consumption and how it will affect blocking when we setup paths.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11b
• /
• pp.1595-1598
• /
• 2002

네트워크 장애로 인한 인터넷 서비스 품질의 저하는 사용자와 서비스 제공자에게 여러 가지 형태로 손실을 가져오므로 망의 우회경로 설정 및 복구방안은 중요한 요소가 되고 있다. 망 복구에 있어서 중요한 과제는 작업 경로(working path)에 대한 복구 경로(restoration path)를 설정하는 것이다. 장애가 발생하더라도 서비스의 중단이 없도록 하기 위해서는 복구 경로를 설정할 때 작업 경로의 대역을 보장할 수 있는 복구 경로를 실정해야 한다. 이를 위해 MPLS망에서는 명시적 Routing기법에 기반을 둔 Constraint-based routing이 제안되었고 또한 망의 경로 복구를 위해 정적 및 동적설정기법이 제안되고 있다. 본 논문에서 제안된 방식은 확장된 OSPF 프로토콜의 TE-LSAs를 이용하여 또 다른 virtual 망을 구성하고 기본경로 중간의 TE-LSR을 새로운 PIL로 설정하여 빠른 대체 LSP를 설정 및 복구하는 기법을 성능 비교를 통해 망 자원의 효율적 사용을 보고자 한다.

• The KIPS Transactions:PartC
• /
• v.12C no.3 s.99
• /
• pp.401-408
• /
• 2005

We propose a new MPLS restoration scheme that uses network resources more efficiently and minimizes the backup path cost effectively. Contrary to other restoration strategies, the proposed restoration scheme starts the recovery action at the selected node of a working LSP. At LSP setup, the working and backup path cost is evaluated and the starting node of restoration is designated. By doing so, the restoration speed could be further increased and resource utilization could be maximized. We simulated the proposed scheme and compared with other restoration and protection schemes. The result shows that our scheme can provide fast restoration with acceptable delay and loss characteristics.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04a
• /
• pp.292-294
• /
• 2002

MPLS망 등에 적용되는 경로 수준의 복구에는 일반적으로 1+1, 1:1, 1:N등의 방법이 제안되었다. 하지만, 이 방법들은 복구 경로 설정 시 모두 자원의 낭비를 초래하며 GMPLS망에 적용 시에도 같은 문제점을 야기한다. 본 논문은 Kini[1]등이 MPLS망에 적용했던 메커니즘의 문제점인 망 자원의 낭비를 최소화하는 동시에 GMPLS망에 적용 가능한 효율적인 경로 복구 방안을 제안한다. 본 메커니즘은 작업 경로 설정 시 복구 경로에 대한 계산은 수행하지만 자원 할당을 장애가 발생할 때까지 연기함으로써 자원의 활용성은 최대화하는 동시에 실제 장애가 발생했을 경우 신속한 자원할당이 가능하도록, CR-LDP[2] Label Request 메시지 전송 시 복구 경로상의 자원을 예약하는 기능을 수행할 수 있도록 CR-LDP를 확장한다.

• Journal of KIISE:Information Networking
• /
• v.37 no.1
• /
• pp.35-41
• /
• 2010

Since the ad-hoc network allow nodes to communicate each other without infrastructure system and predefined configuration, it comes into the spotlight that is suitable to ubiquitous society. In ad-hoc network, route recovery mechanism is considered important. Normally route recovery is needed to solve the link failure problem because there is no route maintaining system like a router in ad-hoc networks. In this paper we propose BS-AODV(Bidirectional Searching-AODV) route recovery method. The proposed method is a local repair method that can be applied in all of the network area. Unlike a limited local repair method in AODV. the proposed method adopts the bidirectional searching method where the upstream/downstream nodes can send the route maintenance messages. Restricting the flooding of route request messages, the proposed scheme attempts to minimize the costs of local repair, the performance of the proposed scheme is evaluated through the simulations. In two scenarios which variate the node numbers and node speed, the comparison among the proposed scheme, AODV and AOMDV is shown in terms of the control traffic and data delivery ratio.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9A
• /
• pp.844-851
• /
• 2010

Recently, AODV routing protocol which one of the table driven method for the purpose data transmission between nodes has been broadly used in mobile wireless sensor networks. An existing AODV has a little overhead of routing packets because of keeping the routing table for activity route and re-routes to recovery the routes in route discontinuation. However that has faults in that excesses useless of the network bandwidth to recovery the route and takes a lone time to recovery the route. This paper proposes an efficient route recovery method for AODV based on wireless sensor networks in connection breaks. The proposed method. The propose method controls the number of RREQ message considering the energy's node and distance between nodes to restrict the flooding range of RREQ message while expanding the range of local repair. In test results, the proposed method are compared to existing method, the number of drops decrease 15.43% and the delay time for re-route decrease 0.20sec.