• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.217-223
• /
• 2004

In block-based lossy video compression, severe quantization causes discontinuities along block boundaries so that annoying blocking artifacts are visible in decoded video images. These blocking artifacts significantly decrease the subjective image quality. In order to reduce the blocking artifacts in decoded images, many algorithms have been proposed. However studies on so called comer outlier, have been very limited. Corner outliers make image edges look disconnected from those of neighboring blocks at cross block boundary. In order to solve this problem we propose a corner outlier detection and compensation algorithm as loop-filtering in spatial domain. Experiment results show that the proposed method provides much improved subjective image quality.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.1
• /
• pp.10-17
• /
• 1985

A new method is suggested for the solution of plane elasticity problems. With use of the dislocation model in the crack problems, the basic scheme of this method is to find equilibrium Burgers vectors of dislocations which are distributed along the boundary of the first fundamental boundary value problems. The stress distribution in the region can be found by superposition of the contributions of each dislocation. The method is applied to three cases with known analytical solutions, and to a V-notched specimen under uniaxial tension. The numerical results are compared with other available solutions. This method is effective and simple in its use, compared with other numerical methods. The method also provides very accurate solutions in the region except near the boundary where the discretization error is significant. The extrapolation method is suggested for the stresses in the boundary region. Extensive application are also suggested for a general estimate of the computational efficiency of the method.

• Progress in Medical Physics
• /
• v.15 no.3
• /
• pp.167-172
• /
• 2004

A Siemens HD-270 MLC$^{TM}$, a virtual-micro MLC, allows to the application of a smooth field edge method due to the finite leaf-width of MLC. This technique was implemented into a Pinnacle planning system in order to evaluate the dose distributions during the planning stage. The necessary dosimetric aspects, such as undulation and effective penumbra, were investigated with variations in the resolutions of a virtual-micro MLC and field edge angle. The positional accuracy of the couch movement was also assessed for clinical implementation. The overhead time for planning and treatment was confirmed as negligible.e.

• Journal of IKEEE
• /
• v.13 no.3
• /
• pp.55-61
• /
• 2009

The heat transfer analysis applying finite element method has been carried out. Particularly, the convection boundary condition associated with the mixed boundary condition is numerically formulated by the Galerkin method analogous to the magnetic field problem. Also, the coupled electromagnet-thermal field analysis by the proposed heat transfer coefficient computation algorithm is executed to enhance the accuracy of solutions. Finally, the validity of the proposed results is verified by comparison with the measured ones.

• Annual Conference on Human and Language Technology
• /
• 1994.11a
• /
• pp.201-206
• /
• 1994

문서 인식 시스템의 성능을 저하시키는 가장 큰 원인 중의 하나로 문자 분할 오류를 들 수 있는데 보다 우수한 성능의 문서 인식 시스템 개발을 위해서는 정확한 문자 분할 방법이 절실히 요구된다. 기존의 문자 분할에 관한 연구들은 이진 영상을 대상으로 함으로써 접촉되거나 겹치는 문자의 경계 부분에서 문자 분할에 유용한 정보들을 잃어 문자 분할 오류를 초래할 수 있다. 하지만 명도 영상을 분석해 보면 문자의 접촉 부분에서 주로 나타나는 지형적 특징이 있으며, 문자 경계에서 명도값이 변하는 것을 관찰할 수 있는데 이와같은 명도 영상의 정보를 사용하면 보다 효과적으로 문자를 분할할 수 있을 것으로 판단된다. 본 연구에서는 이러한 점에 착안하여 명도 영상으로부터 지형적 특징을 추출하고 다단계 그래프 탐색 방법을 이용하여 명도값을 추적함으로써 비선형 문자 경계를 찾는 새로운 문자 분할 방법을 제안한다. 제안된 방법은 명도 문자열 영상을 입력으로 받아 명도 영상의 투영값과 명도 영상으로부터 추출된 지형적 특성을 이용하여 문자 분할 영역을 결정하고 문자 분할 영역내에서 다단계 그래프 탐색에 의한 비선형 문자 분할 경로를 찾는다. 그리고 문자 인식기와 결항하여 최종 문자 분할 위치를 확정하는 인식 결과를 이용한 문자 분할을 수행함으로써 문자 분할 위치 및 문자 인식 결과를 확정한다. 다양한 문서에 대한 실험 결과 제안된 방법이 이진 정보만을 사용하는 방법보다 접촉 혹은 겹친 문자 분할에 매우 효과적임을 알 수 있었다.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.211-222
• /
• 2000

The design values of rock socketed pile related with properties of rock mass are not clearly established. However, the drilled shafts socketed in rock are widely used as the foundation of large scaled structure. In this study, the characteristics of behavior of rock socketed pile is researched, and the properties of interface between pile and rock considering soil-structure interaction are evaluated for numerical modeling of rock socketed pile based on the previous researches. Based on the properties of interface and rock mass, the behaviors of rock socketed piles are numerically modeled and compared with field measurement. To verify the numerical analysis, a micro pile socketed in rock is modeled and the results of numerical analysis are compared with field measurement. The numerical results show a good agreement with field measured data, especially in terms of load transfer characteristics.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.457-468
• /
• 2000

The design values of rock socketed pile related with properties of rock mass are not clearly established. However, the drilled shafts socketed in rock are widely used as the foundation of large scaled structure. In this study, the characteristics of behavior of rock socketed pile is researched, and the properties of interface between pile and rock considering soil-structure interaction are evaluated for numerical modeling of rock socketed pile based on the previous researches. Based on the properties of interface and rock mass, the behaviors of rock socketed piles are numerically modeled and compared with field measurement. To verify the numerical analysis, a micro pile socketed in rock is modeled and the results of numerical analysis are compared with field measurement. The numerical results show a good agreement with field measured data, especially in terms of load transfer characteristics.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.754-757
• /
• 2003

In Oriental medicine, the shape of collarette that formed with position in iris of patients often used by health diagnotcian to grasp health condition. In this paper, we present method that effectively extract collarette that exist in Iris image. After proposed method detert iris area using circular edge detector, derides boundary candidate point through radial line search and threshold value establishment. And boundary candidate line is treated to use nearest neighbor calculation at each boundary candidate point, finally extracts collarette through linear interpolation. As a result of experimenting about iris images, We Confirmed that can be used as assistant tool of diagnostic system that can presume state of ventriculus of human body.

• Journal of KSNVE
• /
• v.6 no.1
• /
• pp.65-70
• /
• 1996

The sensor response of a piezoelectric transducer embedded in a fluid loaded structure is modeled using a hybrid numerical approach. The structure is excited by an obliquely incident acoustic wave. Finite element modeling in the structure and fluid surrounding the transducer region, is used and a plane wave representation is exploited to match the displacement field at the mathematical boundary. On this boundary, continuity of field derivatives is enforced by using a penalty factor and to further achieve transparency at the mathematical boundary, drilling degrees of freedom (d.o.f.) are introduced to ensure continuity of all derivatives. Numerical results are presented for the sensor response and it is found that the sensor at that location is not only non-intrusive but also sensitive to the characteristic of the structure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.11
• /
• pp.1355-1360
• /
• 2011

The interaction between the cell and the substrate is the most prominent feature affecting the migration of a crawling cell. This paper proposes a three-dimensional dynamic model using the diffuse interface description that reveals the effects of the interaction between a single crawling cell and the substrate during chemotactic migration. To illustrate the effects of interaction between the cell and the substrate, we consider the interfacial energy between the coexistent materials. Multiple mechanisms including the interface energy, chemotaxis effect, and diffusion, are addressed by employing a diffuse interface model.