• Korean Journal of Psychosomatic Medicine
• /
• v.3 no.2
• /
• pp.139-146
• /
• 1995

Forty patients meeting DSM-III-H criteria for panic disorder and 51 normal controls were assessed with the Personality Diagnostic Questionnaire-Revised(PDQ-R), a self-rating scale designed to assess Axis II personality disorders and traits. Results replicated previous findings of a preponderance of dependent, avoidant, and histrionic features. But our result showed other features such as paranoid, schizotypal, borderline, and antisocial traits also. Patients were divided into two groups according to the severity of their personality traits(high or low). These groups were compared in various panic symptomatology and SCL-90-R. None of the specific symptom dimensions in panic disorder, i.e. panic, anxiety, agoraphobia, social impairment, or chronicity was different between groups. Rather, high personality trait groups were found to have significantly more symptomatology in SCR-90-R than low personality groups. Result indicated that patients exhibiting a greater number of personality traits were also significantly more symptomatic. The results suggested a possible link beteween panic disorder and personality disorder. And, general factors such as depression, social or interpersonal sensitivity might provide a much better explanation of personality disorders in panic patients.

• Economic and Environmental Geology
• /
• v.34 no.2
• /
• pp.227-241
• /
• 2001

Several $Co_2$-rich springs in the Chungcheong area, Le., the Angsung spring, the Chojung spring, the Myungam spring, the Bukang spring and the Daepyung spring have been long known for their particular water chemistry. The occurrences of these springs are closely related to the geologic structure of Mesozoic granite such as dyke swarms, fault zones and the geologic boundary between granite and its adjacent gneiss. The $Co_2$-rich water samples show a high $Co_2$ concentration ($P_{CO2}$ 0.25 atm to 0.99 atm), weak acidic pHs and the electrical conductivity ranging from 101 to 2,950 ${\mu}$S/cm. The $Co_2$-rich water samples are classified into the Ca-$HC0_3$ type and the Ca(Na)-$HCO_3$) type in chemical composition. Environmental isotopic data $^{2}H/^{1}H, ^{18}O/^{16}O$) indicated that $Co_2$-rich water was meteoric origin. The ${\delta}^{13}C$ values of $Co_2$-rich water range from -3.1$\textperthousand$ to -6.8$\textperthousand$ PDB. The values indicate that $H_2CO_3^0$ and $HC0_3^-$ of the water samples are mainly originated from a deep-seated source and partly contributed from carbonatc minerals. The major minerals determining the chemistry of $Co_2$-rich watcr arc probably the carbonate minerals which are present as veins and secondary minerals, and the plagiocalse in granite and gneiss.

• Economic and Environmental Geology
• /
• v.49 no.1
• /
• pp.31-41
• /
• 2016

A program code was developed to calculate block hydraulic conductivity of the 2-D DFN(discrete fracture network) system based on equivalent pipe network, and implemented to examine the effect of joint orientation distribution on the hydraulic characteristics of fractured rock masses through numerical experiments. A rock block of size $32m{\times}32m$ was used to generate the DFN systems using two joint sets with fixed input parameters of joint frequency and gamma distributed joint size, and various normal distributed joint trend. DFN blocks of size $20m{\times}20m$ were selected from center of the $32m{\times}32m$ blocks to avoid boundary effect. Twelve fluid flow directions were chosen every $30^{\circ}$ starting at $0^{\circ}$. The directional block conductivity including the theoretical block conductivity, principal conductivity tensor and average block conductivity were estimated for generated 180 2-D DFN blocks. The effect of joint orientation distribution on block hydraulic conductivity and chance for the equivalent continuum behavior of the 2-D DFN system were found to increase with the decrease of mean intersection angle of the two joint sets. The effect of variability of joint orientation on block hydraulic conductivity could not be ignored for the DFN having low intersection angle between two joint sets.

• Cartoon and Animation Studies
• /
• s.39
• /
• pp.111-132
• /
• 2015

Although Rotoscoping technique has been used for a long time to mimic the natural and smooth motion since the early 20th century, its artistic value was devalued as tricks because it traces the already recorded images. But the fact that the rotoscoping images can cross the boundaries between animation and live action in an infinite integral freedom in the digital era became rather expansive new aesthetic possibilities of representation of the reality. In addition, Jonas Odell's animations such as (2010), (2008), (2006) are good example to prove that the rotoscoping images also can serve as means to enhance its narrative. This study is to analyze how rotoscoping images act as a unique role in relation with the narrative based on the said person's real stories and realistic images. I argue that his animated films constantly contain these three characteristics -Images to mediate Auditory sensitivity as a record of inner metaphysical reality, anonymous images to represent a specific existential character, and images that act as physical representation that holds the physical space/time and related memory. This reveals that rotoscoping images in this digital era went beyond reproduction for natural movements or special type of style. It rather suggests new layers of experience, and acquires new value in animation. I hope that this study could serve as a foundation to rediscover and re-position the value of rotoscoping images as well as good opportunity to introduce very talented swedish animation artist who already received global attention with his unique philosophical and aesthetic style.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.2
• /
• pp.127-141
• /
• 1995

The distribution of water mass in Deukryang Bay was investigated using observational data obtained on July 12 (spring tide) and 19 (neap tide) in 1994. In characteristics of water mass at the bay the area is divided into three ones by a vertical attenuation coefficient k and a stratification parameter, log sub (10) (H/U super (3)), was H is depth, and U mean velocity in the bay. The contour of k=0.6 has a similar distribution to the isobath of 10m depth in spring tide, and of 5m depth in neap tide, respectively. This indicates that the water mass in the area between the isobath of 5m and 10m depth is changed by tidal periods. The stratification parameter corresponding to k=0.6 was 2.1~2.2. In the shallow water of 5m depth the characteristics of water mass was distributed in temperature of 25.5~31.$0^{\circ}C$ and salinity of 32.8~33.8PSU(Practical Salinity Unit), the temperature was high and the salinity distributed widely. In the deep water of 10m depth it was the temperature of 22.0~29.5$^{\circ}C$ and the salinity of 33.0~33.6PSU, the temperature was low and the salinity distributed narrowly. In the middle depth water of 5m to 10m depth, the temperature of 22.0~30.$0^{\circ}C$ and the salinity of 32.8~33.5PSU, its values showed the middle between the values of the deep area and the values of the shallow area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4635-4642
• /
• 2010

Latex modification of concrete provides the material with higher flexural strength, as well as high bond strength and reduced water permeability. One of the most advantages of the very early-strength latex-modified concrete (VES-LMC) could be the similar contraction and expansion behaviour to normal concrete substrate, which enable to ensure long-term performance. The purpose of this study was to parametric nonlinear flexural nonlinear analysis of RC beam rehabilitated by VES-LMC. The results were as follows; The flexural nonlinear analysis model of RC beam overlaid by VES-LMC in ABAQUS was proposed to predict the load-deflection response, interfacial stress, and ultimate strength. The proposed FE analysis model was verified by comparison of an experimental data and the FE analysis results. The FE analysis results showed that yield point as well as flexural stiffness increased as the depth increased; the stiffness of beam overall increased as the bond stiffness became larger; the bond strength between two different materials is a key factor in composite beam. A parametric study showed that an overlay thickness was a main influencing factor to the behavior of RC beam overlaid by VES-LMC.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.2
• /
• pp.81-98
• /
• 2012

This research aims 1) to analyse the spatial occurrence of red soils, in Korea 2) to predict their spatial distribution using terrain analyses, and 3) to interpret results from the perspective of pedogeomorphological processes. Red soils (often called red-yellow soils) in Korea are frequently found on welldrained plains and gently sloping areas. These soils are widely believed paleo-soils that were formed under hot and humid climatic conditions in the past. The spatial distribution of red soils was derived from the soil map of Korea, and a DEM based soil prediction was developed, based on a continuity equation to depict water and material flows over the landscape. About 64.5% of the red soil occurrence can be explained by the prediction. Close examinations between surveyed and predicted red soil maps show few distinctive spatial features. Granitic erosional plains at the inland of Korea show comparatively low occurrence of red soils, which might indicate active geomorphological processes within the basins. The occurrence of red soils at limestone areas is more abundant than that of the predicted, indicating the influence of parent materials on the formation of red soils. At and around lava plateau at Cheulwon and Youncheon, the occurrence of red soils is underestimated, which might partly be explained by the existence of loess-like surface deposits. There are also distinctive difference of prediction results between northern and southern parts of Korea (divided by a line between Seosan and Pohang). The results of this research calls for more detailed field-based investigations to understand forming processes of red soils, focusing on the spatial heterogeneity of pedological processes, the influence of parent materials, and difference in uplift patterns of the Korean peninsula.

• Economic and Environmental Geology
• /
• v.52 no.5
• /
• pp.323-336
• /
• 2019

The Mesozoic activity on the Korean Peninsula is mainly represented by the Triassic post-collisional, Jurassic orogenic, and Cretaceous post-orogenic igneous activities. The diversity of mineralization by each geological period came from various geothermal systems derived from the geochemical characteristics of magma with different emplacement depth. The Cretaceous metallic mineralization has been carried out over a wide range of time periods from ca. 115 to 45 Ma (main stage; ca. 100 to 60 Ma) related to post-orogenic igneous activity, and spatial distribution patterns of most metal deposits are concentrated along small granitic stocks. The late Cretaceous metal deposits in the Gyeonggi and Yeongnam massifs are generally distributed along the boundary among the Gongju-Eumseong fault system and the Yeongdong-Gwangju fault system and the Gyeongsang Basin, most of them are in the form of a distal epithermal~mesothermal Au-Ag vein or a transitional mesothermal Zn-Pb-Cu vein. On the other hand, diverse metal commodities in the Taebaeg Basin, the Okcheon metamorphic belt and the Gyeongsang Basin are produced from various deposit types such as skarn, carbonate-replacement, vein, porphyry, breccia pipe, and Carlin type. In the late Cretaceous metallic mineralization, various mineral deposits and commodities were induced not only by the pathway of the hydrothermal solution, but also by the diversity of precipitation environment in the proximity difference of the granitic rocks. The diversity of these types of Cretaceous deposits is fundamentally dependent on the geochemical characteristics such as degree of differentiation and oxidation state of related igneous rocks, and ore-forming fluids generally exhibit the evolutionary characteristics of intermediate- to low-sulfur hydrothermal fluids.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.92-92
• /
• 2017

본 연구에서는 수치모델을 이용하여 대하천서 발생되는 조류의 공간적 농도 분포를 예측하였고, 현장실험을 통해 모델을 검증하였다. 국내하천은 다수의 지류가 본류로 유입됨에 따라 오염물질의 생산과 공급이 지속적으로 발생하고, 하천의 유로연장과 하폭에 비해 수심이 낮은 지형학적 특성을 지닌다. 따라서 지류 유입 이후 발생되는 조류의 거동 특성을 분석하기 위해 수심 적분된 2차원 이송-확산 모델을 사용하였다. 광합성 성장을 이루는 조류의 성장속도 계산을 위해 영양염류, 수온, 일사량과 수심 등을 변수로 하는 성장속도 함수들을 위의 모델과 결합하였다. 본 연구의 대상구간은 낙동강과 금호강 합류부를 포함한 강정고령보 하류 약 9.2 km 구간으로 모델 검증을 위한 현장실험을 수행하였다. 2차원 이송-확산 모델의 입력 값인 유속 및 수심을 계산하는 수리동역학 모델 검증을 위해 미국 Sontek사의 M9을 이용하여 낙동강과 금호강 각각 32개, 12개 측선에 대하여 수리량을 측정하였다. 수리량 측정결과, 금호강과 낙동강의 평균 유량은 각각 $240m^3/s$, $60m^3/s$로 측정되었고 측정된 유량을 모델의 상류단 경계조건으로 사용하여 측정 유속 및 수심과 유사한 결과를 모델로부터 취득할 수 있었다. 조류 농도 측정을 위해 독일 bbe사의 AlgaeTorch 10을 사용하였으며, 수리량 측정과 동일한 측선서 총 조류 세포수(cells/ml)를 측정하였다. 농도 측정결과, 하류로 내려감에 따라 조류의 농도가 증가하는 경향이 나타났고 금호강 합류 후 최대농도는 측정구간 최하류 우안서 4,460 cells/ml로 나타났다. 주 흐름이 발생하는 하천 중앙부에 비해 유속이 느린 하안서 상대적으로 높은 농도가 측정되었으며, 이와 같은 경향은 하류로 내려감에 따라 강하게 나타났다. 측정된 조류 농도를 이용한 2차원 이송-확산 모델 검증결과, 합류부 최상류 측선서 MAPE = 10.5 %의 최대오차가 발생하였고 최하류 측선서 MAPE = 6.7 %의 최소오차가 발생하였다. 인과 질소와 같은 영양염류의 농도가 높고 횡 방향 수온 분포가 균일한 대상구간의 특성상 영양염류 함수와 수온 함수로부터 계산된 성장속도 가중치 범위는 각각 0.8~1.0, 0.91~1.09로 공간적 변동성이 크게 나타나지 않은 반면, 수심을 변수로 하는 일사량 함수의 성장속도 가중치 범위는 0.05~1.00으로 상대적으로 매우 높은 공간적 변동성이 나타났다. 수심이 4 m 이하인 하천 양안서 0.8 이상의 가중치가 나타났으며, 수심이 7 m 이상인 하천 중앙서 0.4 이하의 가중치가 나타났다. 본 연구의 수치모의 결과, 수리동역학 모델로부터 계산된 수심이 모델 결과 값에 큰 영향을 미치는 것으로 판단된다.

• Geophysics and Geophysical Exploration
• /
• v.19 no.4
• /
• pp.212-219
• /
• 2016

The development of more advanced geophysical exploration techniques is necessary because the orebodies as yet discovered are increasingly changing in characteristics from shallow/high-grade to deep/low-grade. In this work, laboratory measurement of physical properties of rock samples and a field survey and interpretation of spectral induced polarization (SIP) have been conducted in a skarn metallic deposit, Gagok mine. The purpose of this study is that the applicability of SIP in the exploration of skarn metallic deposits is verified by the comprehensive interpretation between SIP characteristics of rocks obtained from the laboratory measurements and inverted survey results from the field data. In order to understand the SIP characteristics of each lithology, the data of eighty nine rock samples utilized in the previous studies were revaluated. The field survey was carried out using frequency of 0.25 Hz along a survey line designed for intersecting lithological boundaries and evaluating mineralized zones. The mineralized rocks were more conductive (low-resistivity) and capacitive (high-chargeability or strong-phase) than other rocks. Thus, SIP can be one of the very useful tools for the mineral exploration of the skarn deposits.